Site Feedback

Title 50

Displaying title 50, up to date as of 9/21/2021. Title 50 was last amended 9/17/2021.
eCFR Content

The Code of Federal Regulations (CFR) is the official legal print publication containing the codification of the general and permanent rules published in the Federal Register by the departments and agencies of the Federal Government. The Electronic Code of Federal Regulations (eCFR) is a continuously updated online version of the CFR. It is not an official legal edition of the CFR.

Learn more about the eCFR, its status, and the editorial process.

Title 50 Wildlife and Fisheries Part / Section
Chapter II National Marine Fisheries Service, National Oceanic and Atmospheric Administration, Department of Commerce 200 – 299
Subchapter C Marine Mammals 216 – 229
Part 223 Threatened Marine and Anadromous Species 223.101 – 223.301
Subpart A General Provisions 223.101 – 223.102
§ 223.101 Purpose and scope.
§ 223.102 Enumeration of threatened marine and anadromous species.
Subpart B Restrictions Applicable to Threatened Marine and Anadromous Species 223.201 – 223.301
Figures 1-2 to Part 223 [Reserved]
Figure 3 to Part 223
Matagorda TED
Figure 4 to Part 223
Georgia TED
Figure 5 to Part 223
Net Diagram for the Excluder Panel of the Parker Soft TED
Figure 6 to Part 223
TED Extension in Summer Flounder Trawl
Figures 7-9b to Part 223 [Reserved]
Figure 10 to Part 223
Flounder TED
Figure 11 to Part 223
Modified Flounder TED
Figure 12 to Part 223
Escape Opening & Cover Dimensions for 71-inch TED
Figure 13 to Part 223
Single Grid Hard TED Escape Opening
Figures 14a and 14b to Part 223
Maximum Angle of Deflector Bars With Straight Bars Attached to the Bottom of the Frame and Maximum Angle of Deflector Bars With Bent Bars Attached to the Bottom of the Frame
Figure 15 to Part 223
Weedless TED Brace Bar Description
Figure 16 to Part 223
Escape Opening and Flap Dimensions for the Double Cover Flap TED
Figure 17 to Part 223
Boone Wedge Cut Escape Opening
Figures 18a, 18b and 18c to Part 223
Large Frame TED Escape Opening; Minimum Dimensions Using All-Bar Cuts (Triangular Cuts); Large Frame TED Escape Opening; Minimum Dimensions Using All-Bar Cuts and Leading Edge Cut; Large Frame TED Escape Opening; Minimum Dimensions Using All-Points Side Cuts (Rectangular Cut)
Figures 19a and 19b to Part 223
Chauvin Shrimp Deflector Installation Details