Site Feedback

Incorporation by Reference

Title 7 — Agriculture
Material Approved for Incorporation by Reference

7 CFR (700–899) - Grain Inspection, Packers and Stockyards Administration (Federal Grain Inspection Service), Department of Agriculture

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .

Incorporation by Reference

Reader Aids help people use and understand the eCFR. Reader Aids information is not published in the Code of Federal Regulations.

Corn Refiners Association, Inc.

Available from: Federal Grain Inspection Service, Director, Technical Services Center, 10383 North Executive Hills Blvd., Kansas City, MO 64153-1394

Publication CFR Reference
Corn Refiners Association Method A-20, Analysis for Starch in Corn, Second revision, April 15, 1986, Standard Analytical Methods of the Member Companies of the Corn Refiners Association, Inc.
801.7

Federal Grain Inspection Service, Quality Assurance and Research Division

10383 North Executive Hills Blvd., Kansas City, MO 64153–1394

Publication CFR Reference
“Comparison of Kjeldahl Method for Determination of Crude Protein in Cereal Grains and Oilseeds with Generic Combustion Method: Collaborative Study”, July/August 1993, Ronald Bicsak, Journal of AOAC International Vol. 76, No. 4, 1993 (subsequently approved by the AOAC International as the Combustion method, AOAC International Method 992.23)
801.7

National Institute of Standards and Technology (formerly National Bureau of Standards)

Publications available from: Superintendent of Documents, U.S. Government Printing Office, P.O. Box 371954, Pittsburgh, PA 15250-7954; 1-866-512-1800; 202-512-1800 if inside Washington, DC metropolitan area

Publication CFR Reference
Handbook 44—“Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices” (2002 ed.)
802.0
Handbook 105–1—“Specifications and Tolerances for Field Standard Weights” (Revised 1990)
802.0