Rural Utilities Service

Copies of Bulletins may be obtained upon request in person or by mail from Program Development and Regulatory Analysis, 1400 Independence Avenue, SW, Stop 1522, Room 4028 South Building, Washington, DC 20250-1522. Bulletins 50–1 through 50–5 and 50–18 and 345–150 may be purchased from the Superintendent of Documents, U.S. Government Printing Office, P.O. Box 371954, Pittsburgh, PA 15250-7954. Telephone: 1-866-512-1800; 202–512–1800 if inside Washington DC metropolitan area.)

Publication	CFR Reference
50–1 (T–805–B) Electric Transmission Specifications and Drawings for 115 kV to 230 kV 10/88	1728.97
50–2 (T–805–A) Electric Transmission Specifications and Drawings for 34.5 kV to 69 kV 2/73	1728.97
50–5 (D–803) Specifications and Drawings for 14.4/24.9 kV Line Construction 9/69	1728.97
50–15 (DT–3) REA Specifications for Pole Top Pins with 1\3/8\&dprime; Diameter Lead Threat 1/51	1728.97
50–16 (DT–4), REA Specifications for Angle Suspension Brackets 3/52	1728.97
50–19 (DT–7) REA Specifications for Clevis Bolts 8/53	1728.97
50–23 (DT–18) REA Specifications for 60&dprime; Wood Crossarm Braces 2/71	1728.97
50–31 (D–3) REA Specifications for Pole Top Pins with 1&dprime; Diameter Lead Threads 2/79	1728.97
50–32 (D–4) REA Specifications for Steel Crossarm Mounted Pins with 1&dprime; Diameter Lead Threads 10/50	1728.97
50–33 (D–5) REA Specifications for Single and Double Upset Spool Bolts 2/51	1728.97
50–34 (D–6) REA Specifications for Secondary Swinging Clevises 12/70	1728.97
50–35 (D–7) REA Specifications for Service Swinging Clevises 9/52	1728.97
50–36 (D–8) REA Specifications for Service Deadend Clevises 9/52	1728.97
50–40 (D–14) REA Specifications for Pole Top Brackets for Channel Type Pins 9/51	1728.97
50–41 (D–15) REA Specifications for Service Wireholders 11/51	1728.97
50–55 (T–2) REA Specifications for Overhead Ground Wire Support Brackets 5/53	1728.97
50–56 (T–3) REA Specifications for Steel Plate Anchors for Transmission Lines 12/53	1728.97
50–60 (T–9) REA Specifications—Single Pole Steel Structures, Complete with Arms 12/71	1728.97
50–70 (U–1) REA Specifications for 15 kV and 25 kV Primary Underground Power Cable 12/87	1728.97
50–72 (U–4) REA Specifications for Electrical Equipment Enclosures (5–35 kV) 10/79	1728.97
50–73 (U–5) REA Specifications for Pad-Mounted Transformers (Single and Three-Phase) 1/77	1728.97
50–74 (U–6) REA Specifications for Secondary Pedestals (600 Volts and Below) 10/79	1728.97
50–91 (S–3) REA Specifications for Step-Down Distribution Substation Transformers (34.4–138 kV) 1/78	1728.97
345–6 REA Standard for Splicing Plastic-insulated Cables (PC–2) 1/78	1755.97
345–13 REA Specifications for Aerial and Underground Telephone Cable (PE–22) 1/83	1755.97
345–29 REA Specifications for Self-supporting Cable (PE–38) 2/82	1755.97
345–39 REA Specifications for Telephone Station Protectors 3/83	1755.97
345–50 REA Specifications for Trunk Carrier Systems (PE–60) 9/79	1755.97 1755.397 1755.522
345–52 REA Standard for Service Entrance and Station Protector Installations (PC–5A) 1/80	1755.97
345–52 REA Standard for Station Installations (PC–5B) 4/81	1755.97
345–54 REA Specifications for Telephone Cable Splicing Connectors (PE–52) 12/71	1755.97
345–55 REA Specifications for Central Office Loop Extenders and Loop Extender Voice Frequency Repeater Combinations (PE–61) 12/73	1755.97
345–55 REA Specifications for Central Office Loop Extenders and Loop Extender Voice Frequency Repeater Combinations (PE–61) 12/73	1755.522
345–63 REA Standard for Acceptance Tests and Measurements of Telephone Plant (PC–4) 5/76	1755.97
345–65 REA Specifications for Cable Shield Bonding Connectors (PE–33) 6/78	1755.97
345–66 REA Specifications for Subscriber Carrier Systems (PE–64) 9/79	1755.97
345–67 REA Specifications for Filled Telephone Cables (PE–39) 11/81	1755.97
345–69 REA Specifications for Two-wire Voice Frequency Repeater Equipment (PE–29) 1/78	1755.97
345–72 REA Specifications for Filled Splice Cases (PE–74) 1/76	1755.97
345–75 REA Specifications for Electronic Trunk Circuits (PE–65) 1/77	1755.97
345–78 REA Specifications for Carbon Arrester Assemblies for Use in Protectors (PE–78) 2/80	1755.97
345–168 REA Specifications for Equipment for Direct Distance Dialing (Form 538) 10/77	1755.97
345–180 REA Specifications for Voice Frequency Repeaters and Voice Frequency Repeatered Trunks (Form 397a) 1/63	1755.97
345–183 REA Design Specifications for Point-to-point Microwave Radio Systems (Form 397d) 6/70	1755.97
345–184 REA Design Specifications for Mobile and Fixed Dial Radio Telephone Equipment (Form 397e) 5/71	1755.97
RUS Bulletin 1728F-803, Specifications and Drawings for 24.9/14.4 kV Line Construction, October 1998	1728.97
RUS Bulletin 1728F-804 (D-804), Specifications and Drawings for 12.47/7.2 kV Line Construction, October 2005	1728.97
RUS Bulletin 1728F–806 (D0806), REA Specifications and Drawings for Underground Electric Distribution, June 1999	1728.97
RUS Bulletin 1728F-810, Electric Transmission Specifications and Drawings 34.5 Kv Through 69 Kv, March 1998	1728.97
RUS Bulletin 1728F-811, Electric Transmission Specifications and Drawings 115 Kv Through 230 Kv, March 1998	1728.97
RUS Bulletin 1728F–700 REA Specifications for Wood Poles, Stubs and Anchor Logs 7/93	1728.97
RUS Bulletin 1753F–150 Specifications and Drawings for Construction of Direct Buried Plant (RUS Form 515a), September 17, 2001	1755.97
RUS Bulletin 1753F–151 Specifications and Drawings for Construction of Underground Plant (RUS Form 515b) September 17, 2001	1755.97
RUS Bulletin 1753F–152 Specifications and Drawings for Construction of Aerial Plant (RUS Form 515c), September 17, 2001	1755.97
RUS Bulletin 1753F–153 Specifications and Drawings for Service Installations at Customer Access Locations (Form 515d) September 17, 2001	1755.97

American Institute of Timber Construction (AITC)

333 West Hampden Avenue, Englewood, Colorado 80110, Telephone: (303) 761–3212

Publication	CFR Reference
American Institute of Timber Construction—200–83, Inspection Manual, 1987 edition	1728.201 1728.202
American National Standards Institute/American Institute of Timber Construction—ANSI/AITC A190.1–1983, American National Standard for Wood Products—Structural Glued Laminated Timber	1728.202

American National Standards Institute

25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900

Publication	CFR Reference
ANSI 05.1983 Standard for Wood Products Structural Glued Laminated Timber for Utility Structures	1728.201 1728.202
ANSI S1.4–1983, Specification for Sound Level Meters, including Amendment S1.4A–1985	1755.397 1755.522
ANSI T1.506–1990, Telecommunications–Network Performance–Transmission Specifications for Switched Exchange Access Network, including Supplement ANSI T1.506–1992	1755.405
ANSI/NFPA 70-1999, National Electrical Code	1755.500 1755.503 1755.504 1755.505 1755.506 1755.508 1755.509

Amerian National Standards Institute/Electronic Industries Association (ANSI/EIA)

Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112

Publication	CFR Reference
ANSI/EIA 359–A–84, EIA Standard Colors for Color Identification and Coding	1755.860 1755.870

American National Standards Institute/Institute of Electrical and Electronics Engineers, Inc. (ANSI/IEEE)

IEEE Service Center, 445 Hoes Lane, Piscataway, NJ 08854, Telephone: 1–800–678–4333

Publication	CFR Reference
1993 National Electrical Safety Code	1755.900(a)(6) (o)(2)
IEEE C2-1997, National Electrical Safety Code	1755.503 1755.506
ANSI/IEEE Std 743-1984, Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits	1755.405

American National Standard Institute/Insulated Cable Engineers Association, Inc. (ICEA)

ICEA, P.O. Box 440, South Yarmouth, MA 02664, Telephone: 508–394–4424

Publication	CFR Reference
ANSI/ICEA S84–608–1988 Standard for Telecommunications Cable, Filled, Polyolefin Insulated, Copper Conductor Technical Requirements	1755.390 1755.890
ANSI/ICEA S–89–648–1993, Standard for Telecommunications Aerial Service Wire, Technical Requirements (Approved by ANSI July 11, 1994)	1755.702 1755.703 1755.704

American National Standards Institute/National Fire Protection Association (ANSI/NFPA)

Copies are available from NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101, Telephone: 1(800) 344–3555

Publication	CFR Reference
NFPA 70–1993, National Electrical Code	1755.870
ANSI/NFPA 70-1999, National Electrical Code	1755.500 1755.503 1755.504 1755.505 1755.506 1755.508 1755.509

American Society for Testing and Materials (ASTM)

100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 Telephone: (610) 832–9585, FAX: (610) 832–9555

Publication	CFR Reference
ASTM A 109–91, Standard Specification for Steel, Strip, Carbon, Cold-Rolled	1755.910
ASTM A 153–82 (Reapproved 1987), Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware	1755.910
ASTM A 366/A 366M–91, Standard Specification for Steel, Sheet, Carbon, Cold-Rolled, Commercial Quality	1755.910
ASTM A 505–87 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for	1755.390 1755.860 1755.890
ASTM A 525–91b, Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process	1755.910
ASTM A 526/A 526/M–90, Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip process, Commercial Quality	1755.910
ASTM A 569/A 569M–91a, Standard Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Quality	1755.910
ASTM A 621/A 621M–92, Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Drawing Quality	1755.910
ASTM A 640–91, Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable	1755.900(a)(7) (1)(2) (1)(2)(ii) (1)(2)(iii)
ASTM B 3–90, Standard Specification for Soft or Annealed Copper Wire	1755.860
ASTM B 33–91, Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes	1755.397 1755.522 1755.870
ASTM B 117–90, Standard Test Method of Salt Spray (Fog) Testing	1755.910
ASTM B 193–87 Standard Test Method for Resistivity of Electrical Conductor Materials	1755.390 1755.860 1755.890
ASTM B 244–80 Standard Classification of Coppers	1755.390 1755.860 1755.890
ASTM B 539–90, Standard Test Methods for Measuring Contact Resistance of Electrical Connections (Static Contacts)	1755.910
ASTM B 633–85, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel	1755.910
ASTM B 694–86 Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding	1755.390 1755.860 1755.890
ASTM B 736–92a, Standard Specification for Aluminum, Aluminum Alloy, and Aluminum-Clad Steel Cable Shielding Stock	1755.900(a)(7) (k)(8) 1755.870
ASTM D9–87 (Reapproved 1992), Standard Terminology Relating to Wood	1728.201 1728.202
ASTM D 150–87, Standard Test Methods for A–C Loss Characteristics and Permitivity (Dielectric Constant) of Solid Electrical Insulating Materials	1755.868
ASTM D 257–91, Standard Test Methods for D–C Resistance of Conductance of Insulating Materials	1755.860
ASTM D 523–89, Standard Test Method for Specular Gloss	1755.910
ASTM D 610–85 (Reapproved 1989), Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces	1755.910
ASTM D 822–89, Standard Practice for Conducting Tests on Paint and Related Coatings and materials using Filtered Open-Flame Carbon-Arc Light and Water Exposure Apparatus	1755.910
ASTM D 1238–90b, Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer	1755.860 1755.900(a)(7) (m)(5)(i)
ASTM D 1248–84 (1989), Standard Specification for Polyethylene Plastics Molding and Extrusion Materials	1755.860 1755.870 1755.900 (a)(7) (m)(3)(i) (m)(3)(ii) (m)(3)(iii) (m)(3)(iv) (m)(3)(v)
ASTM D 1535–89, Standard Test Method for Specifying Color by the Munsell System	1755.860 1755.870 1755.900(a)(7) (d)(2) 1755.910
ASTM D 1654–92, Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments	1755.910
ASTM D 1693–70 (Reapproved 1988), Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics	1755.910
ASTM D 2197–86 (Reapproved 1991), Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion	1755.910
ASTM D 2247–92, Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity	1755.910
ASTM D 2287–81 (Reapproved 1988), Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds	1755.870
ASTM D 2436–85, Standard Specification for Forced-Convection Laboratory Ovens for Electrical Insulation	1755.870
ASTM D 2565–92, Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus With and Without Water for Exposure of Plastics	1755.910
ASTM D 2633–82 (Reapproved 1989), Standard Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable	1755.870
ASTM D 2794–92, Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)	1755.910
ASTM D 3349–86, Standard Test Method for Absorption Coefficient of Carbon Black Pigmented Ethylene Plastic	1755.860 1755.900(a)(7) (m)(3)(vii)
ASTM D 3928–89, Standard Test Method for Evaluation of Gloss or Sheen Uniformity	1755.910
ASTM D 4101–82 (1988), Standard Specification for Propylene Plastic Injection and Extrusion Materials	1755.860 1755.870
ASTM D 4565–90a, Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable	1755.390 1755.860 1755.870 1755.890 1755.900(a)(7) (c)(6)(i) (k)(10) (m)(5)(iii) (m)(5)(v) App. A
ASTM D 4566–90, Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable	1755.390 1755.860 1755.870 1755.890 1755.900(a)(7) (s)(5)
ASTM D 4568–86, Standard Test Methods for Evaluating Compatibility between Cable Filling and Flooding Compounds and Polyolefin Cable Materials	1755.860 1755.900(a)(7) (g)(3) (j)(2) (k)(9)
ASTM D 4872–88, Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds	1755.860
ASTM E 8–91, Standard Test Methods of Tension Testing of Metallic Materials; and	1755.860
ASTM E 29–90, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications	1755.860 1755.870 1755.900(a)(7) (t)(2)
ASTM G 21–90, Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi	1755.910
ASTM G 23–90, Standard Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials	1755.910

American Wood Preservers’ Association (AWPA)

P.O. Box 286, Woodstock, Maryland 21163–0286

Publication

CFR Reference

American Wood Preservers’ Association—Book of Standards, 1991 edition: A1–91, Standard Methods for Analysis of Creosote and Oil-Type Preservatives A2–91, Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations A3–91, Standard Methods for Determining Penetration of Preservatives and Fire Retardants A5–91, Standard Methods for Analysis of Oil-Borne Preservatives A6–89, Method for the Determination of Oil-Type Preservatives and Water in Wood A7–75, Standard Wet Ashing Procedure for Preparing Wood for Chemical Analysis A9–90, Standard Method for Analysis of Treated Wood and Treating Solutions by X-Ray Spectroscopy A11–83, Standard Method for Analysis of Treated Wood and Treating Solutions by Atomic Absorption Spectroscopy C1–91, All Timber Products—Preservative Treatment by Pressure Processes C4–91, Poles—Preservative Treatment by Pressure Processes C8–91, Western Red Cedar and Alaska Yellow Cedar Poles—Preservative Treatment by the Full-Length Thermal Process C10–91, Lodgepole Pine Poles—Preservative Treatment by the Full-Length Thermal Process C12–90, Western Larch Poles—Full-Length Preservative Treatment by Thermal Process M1–90, Standard for the Purchase of Treated Wood Products M2–91, Standard for Inspection of Treated Timber Products M3–81, Standard Quality Control Procedures for Wood Preserving Plants M4–91, Standard for the Care of Preservative-Treated Wood Products P1/P13–91, Standard for Coal Tar Creosote for Land and, Fresh Water and Marine (Coastal Water Use) P5–91, Standards for Waterbone Preservatives P8–91, Standards for Oil-Borne Preservatives P9–91, Standards for Solvents and Formulations for Organic Preservative Systems

1728.201 1728.202

Bell Communications Research (Bellcore)

Bellcore Customer Service, 60 New England Ave., Piscataway, NJ 08855, Telephone: 1–800–521–2673

Publication	CFR Reference
Document SR–TSV–002275, BOC Notes on the LEC Networks—1990, Issue 1, March 1993	1755.522
Document TR–TSY–000508, Automatic Message Accounting, Section 8.1, Issue 2, July 1987	1755.522
Document TR–TSY–000008, Issue 2, August 1987, Digital Interface between the SLC 96 Digital Loop Carrier System and a Local Digital Switch	1755.397
Document TR–TSY–000057, Issue 1, April 1987, including Rev. 1, November 1988, Funcational Criteria for Digital Loop Carrier Systems	1755.397
Document TR–NWT–000303, Issue 2, December 1992, including Rev. 1, December 1993, Integrated Digital Loop Carrier System Generic Requirements, Objectives, and Interface	1755.397

Electronic Industries Association and/or Telecommunications Industries Association (EIA/TIA)

Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone: 303–792–2181

Publication	CFR Reference
EIA 455–20, Measurement of Change in Optical Transmittance	1755.900(a)(8) (q)(1)(iii)(B)
EIA/TIA 455–25A, Repeated Impact Testing of Fiber Optic Cables and Cable Assemblies	1755.900(a)(9) (q)(2)(iii)
EIA/TIA 455–30B, Frequency Domain Measurement of Multimode Optical Fiber Information Transmission Capacity	1755.900(a)(9) (p)(2)(vi)
EIA/TIA 455-31B, Fiber Tensile Proof Test Method	1755.900(a)(9) (b)(10)
EIA/TIA 455–37A, Low or High Temperature Bend Test for Fiber Optic Cable	1755.900(a)(9) (q)(1)(iii)
EIA 455–41, Compressive Loading Resistance of Fiber Optic Cables	1755.900(a)(8) (q)(3)(iii)
EIA/TIA 455–45B, Method for Measuring Optical Fiber Geometry Using a Laboratory Microscope	1755.900(a)(9) (b)(5) (b)(7) (b)(8)(i)
EIA/TIA 455–46A, Spectral Attenuation Measurement for Long-Length, Graded-Index Optical Fibers	1755.900(a)(9) (p)(2)(i)(A)
EIA/TIA 455–48B, Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments	1755.900(a)(9) (b)(8)(iii)
EIA/TIA 455–51A, Pulse Distortion Measurement of Multimode Glass Optical Fiber Information Transmission Capacity	1755.900(a)(9) (p)(2)(vi)
EIA/TIA 455–53A, Attenuation by Substitution Measurement for Multimode Graded-Index Optical Fibers or Fiber Assemblies Used in Long Length Communications Systems	1755.900(a)(9) (p)(2)(i)(B)
EIA/TIA 455–55B, End-View Methods for Measuring Coating and Buffer Geometry of Optical Fibers	1755.900(a)(9) (b)(12)
EIA/TIA 455–58A, Core Diameter Measurement of Graded-Index Optical Fibers	1755.900(a)(9) (b)(6)
EIA/TIA 455–59, Measurement of Fiber Point Defects Using an OTDR	1755.900(a)(9) (p)(1)(iii) (p)(2)(ii)
EIA/TIA 455–61, Measurement of Fiber or Cable Attenuation Using an OTDR	1755.900(a)(9) (p)(1)(i)(B) (p)(2)(i)(C)
EIA/TIA 455–78A, Spectral-Attenuation Cutback Measurement for Single-Mode Optical Fibers	1755.900(a)(9) (p)(1)(i)(A)
EIA/TIA 455–81A, Compound Flow (Drip) Test for Filled Fiber Optic Cable	1755.900(a)(9) (q)(7)(i)
EIA/TIA 455–82B, Fluid Penetration Test for Fluid-Blocked Fiber Optic Cable	1755.900(a)(9) (q)(6)(i)
EIA/TIA 455–85A, Fiber Optic Cable Twist Test	1755.900(a)(9) (q)(4)(iii)
EIA/TIA 455–86, Fiber Optic Cable Jacket Shrinkage	1755.900(a)(8) (m)(5)(iv)
EIA/TIA 455–89A, Fiber Optic Cable Jacket Elongation and Tensile Strength	1755.900(a)(8) (m)(5)(ii)
EIA/TIA 455–104A, Fiber Optic Cable Cyclic Flexing Test	1755.900(a)(9) (q)(5)(iii)
EIA/TIA 455–164A, Single-Mode Fiber, Measurement of Mode Field Diameter by Far-Field Scanning	1755.900(a)(9) (b)(3)(i)
EIA/TIA 455–165A, Mode Field Diameter Measurement by Near-Field Scanning echnique	1755.900(a)(9) (b)(3)(ii)
EIA/TIA 455–167A, Mode Field Diameter, Variable Aperture in the Far Field	1755.900(a)(9) (b)(3)(iii)
EIA/TIA 455–168A, Chromatic Dispersion Measurement of Multimode Graded-Index and Single-Mode Optical Fibers by Spectral Group Delay Measurement in the Time Domain	1755.900(a)(9) (p)(1)(vi)(A)
EIA/TIA 455–169A, Chromatic Dispersion Measurement by Single-Mode Optical Fibers by the Phase-Shift Method	1755.900(a)(9) (p)(1)(vi)(B)
EIA/TIA 455–170, Cable Cutoff Wavelength of Single-Mode Fiber by Transmitted Power	1755.900(a)(9) (p)(1)(viii)
EIA/TIA 455–173, Coating Geometry Measurement for Optical Fiber Side-View Method	1755.900(a)(9) (b)(12)
EIA/TIA 455–174, Mode Field Diameter of Single-Mode Optical Fiber by Knife-Edge Scanning in the Far Field	1755.900(a)(8) (b)(3)(iv)
EIA/TIA 455–175A, Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the Differential Phase Shift Method	1755.900(a)(9) (p)(1)(vi)(C)
EIA/TIA 455–176, Method for Measuring Optical Fiber Cross-Sectional Geometry by Automated Grey-Scale Analysis	1755.900(a)(9) (b)(5) (b)(6) (b)(7) (b)(8)(ii)
EIA/TIA 455–177A, Numerical Aperture Measurement of Graded-Index Optical Fibers	1755.900(a)(9) (p)(3)
EIA/TIA 455-178, Measurements of Strip Force Required for Mechanically Removing Coatings from Optical Fibers	1755.900(a)(9) (b)(13)
EIA/TIA 455–598, Color Coding of Fiber Optic Cables	1755.900(a)(9) (d)(2)

Department of the Army

U.S. Army Corps of Engineers, Publications Depot, 2803 52nd Avenue, Hyattsville, MD 20781

Publication	CFR Reference
Engineering and Design Dam Safety Assurance Program, ER 1110-2-1155, July 31, 1995	1724.55(a)(2)

Edison Electric Institute

Available from: Raptor Research Foundation, 12805 St. Croix Trail South, Hastings, MN 55033

Publication	CFR Reference
Suggested Practices for Raptor Protection on Power Lines: The State of the Art in 1996	1724.52(a)

Federal Emergency Management Agency (FEMA)

Mitigation Directorate, P.O. Box 2012, Jessup, MD 20794

Publication	CFR Reference
Federal Guidelines for Dam Safety, FEMA 93, June 1979	1724.55(a)(1)(ii)

General Services Administration

Specification Section, 490 East L’Enfant Plaza, SW., Washington, DC 20407. Telephone: 202–755–0325

Publication	CFR Reference
Federal Standard H28, Screw-Thread Standards for Federal Services, March 31, 1978, including Change Notice 1, May 28, 1986; Change Notice 2, January 20, 1989; and Change Notice 3, March 12, 1990	1755.397 1755.522

Institute of Electrical and Electronics Engineers, Inc.

IEEE Service Center, 445 Hoes Lane, Piscataway, NJ 08855, Telephone: (800)–678–4333

Publication	CFR Reference
IEEE C2-1997, National Electrical Safety Code	1755.503 1755.506
IEEE Std 730–1989, Standard for Software Quality Assurance Plans	1755.522
IEEE Std 455–1985, Standard Test Procedure for Measuring Longitudinal Balance of Telephone Equipment Operating in the Voice Band	1755.397 1755.522
1993 National Electrical Safety Code	1755.900(a)(6) (o)(2)

National Fire Protection Association

1 Batterymarch Park, P.O. Box 9101, Quincy, Massachusetts 02269-9101

Publication	CFR Reference
ANSI/NFPA 70-1999, National Electrical Code	1755.500 1755.503 1755.504 1755.505 1755.506 1755.508 1755.509

Raptor Research Foundation

c/o Department of Veterinary Biology, University of Minnesota, St. Paul, Minnesota 55101

Publication	CFR Reference
Suggested Practices for Raptor Protection on Power Lines, Raptor Research Report No. 4 (1981)	1724.45

Southern Pine Inspection Bureau

4709 Scenic Highway, Pensacola, Florida 32504, Telephone (904) 434–2611

Publication	CFR Reference
Southern Pine Inspection Bureau—Standard Grading Rules for Southern Pine Lumber, October 15, 1991	1728.201
Southern Pine Inspection Bureau—Special Product Rules for Structural, Industrial, and Railroad-Freight Car Lumber, October 15, 1991	1728.201

Underwriters Laboratories, Inc. (UL)

Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179

Publication	CFR Reference
UL 94, Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances, Fourth Edition, June 18, 1991	1755.910
UL 1666, Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts, January 22, 1991	1755.870

West Coast Lumber Inspection Bureau

P.O. Box 23145, Portland, Oregon 97223, Telephone (503) 639–0651, Fax (503) 684–8928

Publication	CFR Reference
West Coast Lumber Inspection Bureau—Standard No. 17, Grading Rules for West Coast Lumber, September 1, 1991	1728.201