All materials are available from the Office of Rulemaking, DOT–NHTSA, 400 7th St. SW., Washington, DC 2059049 CFR
The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
| Publication | CFR Reference |
|---|---|
|
ASTM E 274–79 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full–Scale Tire
|
575.104
|
|
ASTM E 501–76 Standard Tire for Pavement Skid Resistance Tests
|
575.104(f)(1)(ii) and (vii)
|
|
ASTM F 377–74 Standard Method for Calibration of Braking Force for Testing of Pneumatic Tires
|
575.104(f)(1)(v)
|
c/o Docket 74–14, Docket Section, National Highway Traffic Safety Administration, Room 5109, 400 Seventh Street SW., Washington, DC 20590
| Publication | CFR Reference |
|---|---|
|
The Anthropomorphic Test Dummy Parts List, dated December 15, 1987, and a Parts List Index, dated December 15, 1987
|
572.31(a)
|
|
The Anthromorphic Test Dummy Parts List, dated April 22, 1986
|
572.31(a)
|
|
The Anthromorphic Test Dummy Parts List, dated September 9, 1996
|
572.31(a)
|
|
A listing of Optional Hybrid III Dummy Transducers, dated April 22, 1986
|
572.31(a)
|
|
A General Motors Drawing Package identified by GM drawing No. 78051–218 revision R and subordinate drawings
|
572.31(a)
|
|
A General Motors Drawing Package identified by GM drawing No. 78051–218 revision S, “Hybrid III Anthromorphic Test Dummy”, dated May 20, 1978
|
572.31(a)
|
|
GE Drawing No. 78051–218, Revision U, and subordinate drawings dated August 30, 1998
|
572.31
572.34 |
|
Drawing No. 78051–55, “Instrumentation Assembly – Pelvic Accelerometer”, dated August 2, 1979
|
Part 572
|
|
Drawing No. 78051–59, Revision G, Pelvic Assembly–Complete–Hybrid III, dated June 30, 1998
|
572.31
|
|
Drawing No. 78051–60, Revision E, Pelvic Structure–Molded ASM–Hybrid III, dated June 30, 1998
|
572.31
|
|
Drawing No. 78051–61, Revision T, “Head Assembly”, complete, dated May 20, 1978
|
Part 572
|
|
Drawing No. 78051–61X, Revision C, “Head Assembly”, complete, dated March 28, 1997
|
Part 572, subpart M
|
|
Drawing No. 78051–70 , Revision E, “Lower Torso Assembly”, complete, dated August 20, 1996
|
Part 572
|
|
Drawing No. 78051–70, Revision F, Lower Torso Assembly–Complete–Hybrid III, dated June 30, 1998
|
572.31
|
|
Drawing No. 78051–89, Revision K, “Upper Torso Assembly”, complete, dated May 20, 1978
|
Part 572
|
|
Drawing No. 78051–90, Revision A, “Neck Assembly”, complete, dated May 20, 1978
|
Part 572
part 572, subpart M |
|
Drawing No. 78051–123, Revision D, “Arm Assembly”, complete, dated May 20, 1978
|
Part 572
|
|
Drawing No. 78051–124, Revision D, “Arm Assembly”, complete, dated May 20, 1978
|
Part 572
|
|
Drawing number 78051–383X, Revision P, titled “Neck Transducer Structural Replacement”, dated November 1, 1995
|
Part 572, subpart M
|
|
Drawing 86–5001–001, Revision A, “Leg Assembly”, complete, dated March 26, 1996
|
Part 572
|
|
Drawing 86–5001–002, Revision A, “Leg Assembly”, complete, dated March 26, 1996
|
Part 572
|
|
A General Motors Drawing No. 78051–218, Revision T, “Hybrid III Anthromorphic Test Dummy”, dated May 20, 1978
|
572.31
572.34 |
|
Disassembly, Inspection, Assembly and Limbs Adjustment Procedures for the Hybrid III dummy, dated July 15, 1986
|
572.31(a)
|
|
Disassembly, Inspection, Assembly and Limbs Adjustment Procedures for the Hybrid III dummy, dated September 1996
|
572.31(a)
|
|
Disassembly, Inspection, Assembly and Limbs Adjustment Procedures for the Hybrid III dummy, dated April 1997
|
572.31(a)
|
|
Sign Convention for the signal outputs of Hybrid III dummy transducers, dated July 15, 1986
|
572.31(a)
|
|
Exterior Dimensions of the Hybrid III dummy, dated July 15, 1986
|
572.31(a)
|
Office of Vehicle Safety Standards, DOT–NHTSA, 400 7th St. SW., Washington, DC 20590
| Publication | CFR Reference |
|---|---|
|
Parts/Drawings List, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES2re), September 2006
|
572, Subpart U
|
|
Parts/Drawings List, Part 572 Subpart V, SID–IIsD, September 2006
|
572, Subpart V
|
|
(i) Drawing No. 175–0000 ES–2re Dummy Assembly
|
572, Subpart U
|
|
(ii) Drawing No. 175–1000 Head Assembly
|
572, Subpart U
|
|
(iii) Drawing No. 175–2000, Neck Assembly Test/Cert
|
572, Subpart U
|
|
(iv) Drawing No. 175–3000, Shoulder Assembly
|
572, Subpart U
|
|
(v) Drawing No. 175–3500, Arm Assembly, Left
|
572, Subpart U
|
|
(vi) Drawing No. 175–3800, Arm Assembly, Right
|
572, Subpart U
|
|
(vii) Drawing No. 175–4000, Thorax Assembly with Rib Extensions
|
572, Subpart U
|
|
(viii) Drawing No. 175–5000, Abdominal Assembly
|
572, Subpart U
|
|
(ix) Drawing No. 175–5500 Lumbar Spine Assembly
|
572, Subpart U
|
|
(x) Drawing No. 175–6000 Pelvis Assembly
|
572, Subpart U
|
|
(xi) Drawing No. 175–7000–1, Leg Assembly—left
|
572, Subpart U
|
|
(xii) Drawing No. 175–7000–2, Leg Assembly—right
|
572, Subpart U
|
|
(xiii) Drawing No. 175–8000, Neoprene Body Suit
|
572, Subpart U
|
|
(xiv) Drawing No. 175–9000, Headform Assembly
|
572, Subpart U
|
|
(i) Drawing No. 180–0000, SID–IIsD Complete Assembly
|
572, Subpart V
|
|
(ii) Drawing No. 180–1000, 6 Axis Head Assembly
|
572, Subpart V
|
|
(iii) Drawing No. 180–2000, Neck Assembly
|
572, Subpart V
|
|
(iv) Drawing No. 180–3000, Upper Torso Assembly
|
572, Subpart V
|
|
(v) Drawing No. 180–3005, Washer, Clamping
|
572, Subpart V
|
|
(vi) Drawing No. 9000021, Screw, SHCS 3/8–16 x 1 NYLOK
|
572, Subpart V
|
|
(vii) Drawing No. 900005, Screw, SHCS 1/4–20 x 5/8 NYLOK
|
572, Subpart V
|
|
(viii) Drawing No. 180–4000, Lower Torso Assembly Complete
|
572, Subpart V
|
|
(ix) Drawing No. 180–5000–1, Complete Leg Assembly, Left
|
572, Subpart V
|
|
(x) Drawing No. 180–5000–2, Complete Leg Assembly, Right
|
572, Subpart V
|
|
(xi) Drawing No. 180–6000–1, Arm Assembly Left Molded
|
572, Subpart V
|
|
(xii) Drawing No. 180–6000–2, Arm Assembly Right Molded
|
572, Subpart V
|
|
(xiii) Drawing No. 180–9000, SID–IIsD Headform Assembly
|
572, Subpart V
|
|
Procedures for Assembly, Disassembly and Inspection (PADI) of the EuroSID–2re 50th Percentile Adult Male Side Impact Crash TestDummy, September 2006
|
572, Subpart U
|
|
Procedures for Assembly, Disassembly and Inspection (PADI) of the SID–IIsD Side Impact Crash Test Dummy, September 2006
|
572, Subpart V
|
|
A User's Manual entitled “Free–Motion Headform User's Manual,” version 2, March 1995
|
572.100
572.101, 572.103 |
9107 Gaither Road, Gaithersburg, MD 20877, Telephone (301) 419–5070, FAX (301) 419–5069
| Publication | CFR Reference |
|---|---|
|
Drawings and Specifications:
|
|
|
SA 150 M010—Head Assembly, 1973
|
Part 572
|
|
SA 150 M020—Neck Assembly, 1973
|
Part 572
|
|
SA 150 M030—Shoulder–thorax Assembly, 1973
|
Part 572
|
|
SA–SID–M030, Revision A, titled “Thorax Assembly”, complete, dated May 18, 1994
|
Part 572, subpart M
|
|
SA 150 M050—Lumbar Spine Assembly, 1973
|
Part 572
|
|
SA–SID–M050, Revision A, titled “Lumbar Spine Assembly”, dated May 18, 1994
|
Part 572, subpart M
|
|
SA–SID–M050— Lumbar Spine Assembly drawing, Revision B, dated September 12, 1996
|
Part 572
|
|
SA–SID–053 “Lumbar Spine Assembly”, Revision A, dated May 18, 1994
|
Part 572, subpart M
|
|
SA 150 M060—Pelvis and Abdomen Assembly, 1973
|
Part 572
|
|
SA–SID–M060, Revision A, “Pelvis and Abdomen Assembly”, dated May 18, 1994
|
Part 572, subpart M
|
|
SA 150 M070—Right Arm Assembly, 1973
|
Part 572
|
|
SA 150 M071—Left Arm Assembly, 1973
|
Part 572
|
|
SA 150 M080—Right Leg Assembly, 1973
|
Part 572
|
|
SA–SID–M080, “Leg Assembly, Right”, dated August 13, 1987
|
Part 572, subpart M
|
|
SA 150 M081—Left Leg Assembly, 1973
|
Part 572
|
|
SA–SID–M081, “Leg Assembly, Left”, dated August 13, 1987
|
Part 572, subpart M
|
|
Operation and Maintenance Manual for 3–year–old Test Dummy, SA 103C, Contract No. DOT–HS–6–01294, dated May 28, 1976
|
Part 572
|
|
SA 103C 010 Head Assembly, 1976
|
Part 572
|
|
SA 103C 020 Neck Assembly, 1976
|
Part 572
|
|
SA 103C 030 Torso Assembly, 1976
|
Part 572
|
|
SA 103C 141 Upper Arm Assembly Left, 1976
|
Part 572
|
|
SA 103C 142 Upper Arm Assembly Right, 1976
|
Part 572
|
|
SA 103C 051 Forearm Hand Assembly Left, 1976
|
Part 572
|
|
SA 103C 052 Forearm Hand Assembly Right, 1976
|
Part 572
|
|
SA 103C 061 Upper Leg Assembly Left, 1976
|
Part 572
|
|
SA 103C 062 Upper Leg Assembly Right, 1976
|
Part 572
|
|
SA 103C 071 Lower Leg Assembly Left, 1976
|
Part 572
|
|
SA 103C 072 Lower Leg Assembly Right, 1976
|
Part 572
|
|
SA 103C 081 Foot Assembly Left, 1976
|
Part 572
|
|
SA 103C 082 Foot Assembly Right, 1976
|
Part 572
|
|
Parts List and Drawings, Subpart R, CRABI 12–month–old Infant Crash Test Dummy (CRABI–12, Alpha version), August 2001
|
572.150
|
|
Parts List and Drawings, Subpart R, CRABI 12–month–old Infant Crash Test Dummy (CRABI–12, Alpha version), August 2001, consisting of:
|
|
|
Drawing No. 921022–001, Head Assembly
|
572.150, 572.151, 572.152, 572.154, 572.155
|
|
Drawing No. 921022–041, Neck Assembly
|
572.150, 572.151, 572.153, 572.154, 572.155
|
|
Drawing No. TE–3200–160, Headform
|
572.150, 572.151, 572.153
|
|
Drawing No. 921022–060, Torso Assembly
|
572.150, 572.151, 572.154, 572.155
|
|
921022–055, Leg Assembly
|
572.150, 572.151, 572.155
|
|
921022–054, Arm Assembly
|
572.150
572.151 572.155 |
|
The CRABI–12 Test Dummy Parts List
|
572.150
|
|
Procedures for Assembly, Disassembly, and Inspection (PADI), Subpart R, CRABI 12–month–old Infant Crash Test Dummy (CRABI–12, Alpha version), August 2001
|
572.150, 572.151
|
|
Parts List and Drawings, Subpart P, Hybrid III 3–year–old Child Crash Test Dummy (H–III3C, Alpha version), September 2001, including:
|
|
|
Drawing No. 210–1000, Head Assembly
|
572.140, 572.141, 572.142, 572.144, 572.145, 572.146
|
|
Drawing No. 210–2001, Neck Assembly
|
572.140, 572.141, 572.143, 572.144, 572.145, 572.146
|
|
Drawing No. 210–3000, Upper/Lower Torso Assembly
|
572.140, 572.141, 572.143
|
|
Drawing No. 210–5000–1(L), –2(R), Leg Assembly
|
572.140, 572.141, 572.144, 572.145, 572.146
|
|
Drawing No. 210–6000–1(L), –2(R), Arm Assembly
|
572.140, 572.141, 572.144, 572.145
|
|
The Hybrid III Three–year–old Dummy Parts List
|
572.140
|
|
Procedures for Assembly, Disassembly, and Inspection (PADI), Subpart P, Hybrid III 3–year–old Child Crash Test Dummy (H–III3C, Alpha version), September 2001
|
572.140, 572.141
|
|
AGA, 572.141RD–AR–330 Hybrid III Dummy Transducers list, Anthropomorphic Dummies for Crash and Escape System Testing, Chapter 6, table 6–2, North Atlantic Treaty Organization, July 1996
|
572.31
|
|
Construction of an Infant Dummy (Mark II) for Dynamic Tests of Crash Restraint Systems, July 2, 1974
|
Part 572
|
|
SA 106, C001, C010, C020, C030, C041, C042, C050, C060, C071 and C072 establishing specifications for an anthropomorphic test dummy representing a 6–year–old child
|
Part 572
|
|
SA 106C 001, “Crash Test Dummy Ass'y. 6 Yr. Old Child”, sheets 1 through 7, released July 11, 1997, technical drawings and specifications, parts list package, and list of measurement definitions (“Landmark Definitions” (sheet 18) for anthropomorphic test dummy representing 6–year–old child
|
572.71
572.74 572.78 |
|
Drawings and Specifications for the Hybrid III 6–year–old child dummy (H–III6C) Subpart I, Beta Version, June 2002 consisting of:
|
|
|
Drawing No. 127–1000, Head Assembly
|
572.120
|
|
Drawing No. 127–1015–Neck Assembly
|
572.120
|
|
Drawing No. 127–2000, Upper Torso Assembly
|
572.120
|
|
Drawing No. 127–3000, Lower Torso Assembly
|
572.120
|
|
Drawing No. 127–4000, Leg Assembly
|
572.120
|
|
Drawing No. 127–5000, Arm Assembly
|
572.120
|
|
The Hybrid III Six–year–old Parts List
|
572.120
|
|
Procedures for Assembly, Disassembly, and Inspection (PADI) of the Hybrid III 6–year–old Child Crash Test Dummy, Beta version (June 2002)
|
572.120
|
|
SA 106C 010, Revision A (sheet 8) Head Assembly, 1989
|
Part 572
|
|
SA 106C 020, Revision A (sheet 9) Neck Assembly, 1989
|
Part 572
|
|
SA 106C 030, Revision C (sheet 10) Thorax Assembly, 1996 (including 6C–1610–1 through –4 Screw Button Head Socket, 1996, and 6C–1021 Ballast, 6–year–old Thoraxc [for 7267A], 1996)
|
Part 572
|
|
SA 106C 030, Revision D (sheet 11) Thorax Assembly, 1996 (including 6C–909, Revision A, Cover–chest Accelerometer, 1996 and 6C– 1000–1, Revision C,Sternum Thoracic Weld Ass'y., 1996)
|
Part 572
|
|
SA 106C 041, Revision A (sheet 14) Arm Assembly, Right, 1989
|
Part 572
|
|
SA 106C 042, Revision A (sheet 15) Arm Assembly, Left, 1989
|
Part 572
|
|
SA 106C 050, Revision A (sheet 12) Lumbar Spine Assembly, 1989
|
Part 572
|
|
SA 106C 060, Revision A (sheet 13)Pelvis Assembly, 1989
|
Part 572
|
|
SA 106C 071, Revision B (sheet 16) Leg Assembly, Right, 1995
|
Part 572
|
|
SA 106C 072, Revision B (sheet 17) Leg Assembly, Left, 1995
|
Part 572
|
|
User's Manual entitled “Six–Year–Old Size Child Test Dummy SA106C,” October 28, 1991
|
Part 572
|
|
LP 1049/1 through 1049/54, dummy components and parts
|
Part 572
|
|
LP 1049/A, March 1979, assembled dummy with its major components
|
Part 572
|
|
LP 1049/0 parts list (5 sheets), index
|
Part 572
|
|
The TNO P3/4, Child Dummy Users Manual, January 1979, Instituut voor Wegtransportmiddelen TNO
|
Part 572
|
|
SA 1001, 1974
|
Part 572
|
|
FIR100 Filter Program, Version 1.0, dated July 16, 1990
|
572.44
|
|
Parts List and Drawings, Part 572 Subpart S Hybrid III Weighted Six–Year–Old Child Test Dummy (H–III6CW, Alpha Version), April 13, 2004, including:
|
|
|
Drawing No. 167–0000, Complete Assembly
|
572.160, 572.161 Table A, 572.161(a)(1)
|
|
Drawing No. 167–2000, Upper Torso Assembly
|
572.160(a)(1), 572.161, 572.161 Table A, 572.164, 572.165(a)
|
|
Drawing No. 167–2020 (Revised) December 8, 2005: Spine Box Weight
|
572.160(a)(1), 572.161(a)(1), 572.161 Table A, 572.165(a)
|
|
Drawing No. 167–3000, Lower Torso Assembly
|
572.160(a)(1), 572.161(a)(1), 572.161 Table A, 572.165(a)
|
|
Drawing No. 167–3010 (Revision A) December 8, 2005: Lumbar Weight Base
|
572.160(a)(1), 572.161(a)(1), 572.161 Table A, 572.165(a)
|
|
Procedures for Assembly, Disassembly, and Inspection (PADI) of the Weighted Hybrid III 6–year–old Child Crash Test Dummy (H–III6CW), April 2004
|
572.160(a)(1), 572.161(a)(3)
|
|
The Hybrid III Weighted Six–Year–Old Child Parts/Drawings List, April 13, 2004
|
572.160(a)(1)
572.161(a)(1) |
|
Side Impact Moving Deformable Barrier Drawings, DSL–1279, 1280, 1281, 1284, and 1286 dated Aug. 20, 1980; DSL 1278; 1283, 1285, 1287, and 1290 dated October 1991
|
587.6
|
|
Drawing numbers 126–0000 through 126–0015 (sheets 1 through 3), 126–0017 through 126–0027, and a parts list “Parts List for CAMI Newborn Dummy”, Construction of the Newborn Infant Dummy, 1992
|
Part 572, subpart K
|
|
Dummy assembly drawing SA–SID–M001, revision C, “50th Percentile Anthropomorphic Side Impact Dummy”, dated September 12, 1996
|
Part 572
|
|
Dummy Assembly drawings SID–M001A revision A, SID–M001 revision B, SA–SID–M030 revision A, SA–SID–050 revision A, SA–SID–M060 revision A, SA–SID–087 sheet 1 revision H and SA–SID–087 sheet 2 revision H, all dated May 18, 1994; and the User's Manual dated May 1994
|
572.41
|
|
Drawing SA–SID–M001A revision A dated May 18, 1994
|
572.42(a)
572.43(a) |
|
Drawing SA–SID–M001A, revision B, “Completed Assembly Side Impact Dummy”, dated September 12, 1996
|
Part 572
|
|
Drawing SID–SM–001, dated May 12, 1994
|
Part 572
|
|
Drawing SID–SM–002, dated May 12, 1994
|
Part 572
|
|
Drawing SID–005 revision F dated May 18, 1994
|
572.44(b)(1)
|
|
Drawing SID–087 revision H dated May 18, 1994
|
572.44(c)
|
|
Procedures for Disassembly, Inspection, Assembly and Limbs Adjustment of the Hybrid III Dummy issued April 1997, revised June 1998
|
572.31
|
|
Side Impact Dummy, Hybrid III, Anthropomorphic Test Dummy Parts List, dated May 10, 1997, and Users Manual, dated May 1997
|
Part 572, subpart M
|
|
Anthropomorphic Test Dummy Parts List, Hybrid III, dated June 26, 1998, and Parts List Index, dated June 26, 1998
|
572.31
|
|
Drawing SA–SIDH3–M001 “Complete Assembly SIDH3”, dated April 19, 1997
|
Part 572, subpart M
|
|
Drawing SIDH3–001, “Head–Neck Bracket”, dated August 30, 1996
|
Part 572, subpart M
|
|
Drawing SIDH3–006, “Upper and Middle Shoulder Foam”, dated May 10, 1997
|
Part 572, subpart M
|
|
Parts List and Drawings, Part 272 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (H–III5F, Alpha Version), June 2002
|
572.130, 572.131
|
|
Parts List and Drawings, Part 272 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (H–III5F, Alpha Version), June 2002, including:
|
|
|
Drawing No. 880105–100X, Head Assembly
|
572.130, 572.131, 572.132, 572.133, 572.134, 572.135, 572.137
|
|
Drawing No. 880105–250, Neck Assembly
|
572.130, 572.131, 572.133, 572.134, 572.135, 572.137
|
|
Drawing No. 880105–300, Upper Torso Assembly
|
572.130, 572.131, 572.134, 572.135, 572.137
|
|
Drawing No. 880105–450, Lower Torso Assembly
|
572.130, 572.131, 572.134, 572.135, 572.137
|
|
Drawing No. 880105–560–1, Complete Leg Assembly–left
|
572.130, 572.131, 572.135, 572.136, 572.137
|
|
Drawing No. 880105–560–2, Complete Leg Assembly–right
|
572.130, 572.131, 572.135, 572.136, 572.137
|
|
Drawing No. 880105–728–1, Complete Arm Assembly–left
|
572.130, 572.131, 572.134, 572.135
|
|
Drawing No. 880105–728–2, Complete Arm Assembly–right
|
572.130, 572.131, 572.134, 572.135
|
|
Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy Parts List
|
572.130, 572.131
|
|
Procedures for Assembly, Disassembly, and Inspection (PADI) of the Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy, Alpha Version (February 2002)
|
572.130, 572.132
|
|
The “Free Motion Headform Drawing Package” consisting of the following drawings:
|
|
|
Drawing number 92041–001 titled “Head Form Assembly,” dated November 30, 1992
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 92041–002 titled, “Skull Assembly,” dated November 30, 1992
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 92041–003 titled, “Skull Cap Plate Assembly,” dated November 30, 1992
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 92041–004 titled, “Skull Cap Plate,” dated November 30, 1992
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 92041–005 titled, “Threaded Pin,” dated November 30, 1992
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 92041–006 titled, “Hex Nut,” dated November 30, 1992
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 92041–008 titled, “Head Skin without Nose,” dated November 30, 1992, as amended March 6, 1995
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 92041–009 titled, “Six–Axis Load Cell Simulator Assembly,” dated November 30, 1992
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 92041–011 titled, “Head Ballast Weight,” dated November 30, 1992
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 92041–018, “Head Form Bill of Materials,” dated November 30, 1992
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 78051–148, titled “Skull–Head (cast) Hybrid III,” dated May 20, 1978, as amended August 17, 1978
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 78051–228/78051–229 titled “Skin–Hybrid III,” dated May 20, 1978 as amended through September 24, 1979
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 78051–339 titled “Pivot Pin—Neck Transducer,” dated May 20, 1978, as amended May 14, 1986
|
572.100, 572.101
572.102 572.103 |
|
Drawing number 78051–372 titled “Vinyl Skin Formulation Hybrid III,” dated May 20, 1978
|
572.100, 572.101
572.102 572.103 |
|
Drawing number C–1797, “Neck Blank, dated August 1, 1989
|
572.100, 572.101
572.102 572.103 |
|
Drawing number SA572–S4, titled “Accelerometer Specification,” dated November 30, 1992
|
572.100, 572.101
572.102 572.103 |
400 Commonwealth Dr., Warrendale, PA 15096–0001, Telephone: (412) 776–4841
| Publication | CFR Reference |
|---|---|
|
SAE J211–1980 Instrumentation for Impact Tests
|
572.36(i)
572.44 |
|
SAE J211–1995 “Instrumentation for Impact Tests—Parts 1 and 2,” dated March, 1995
|
572.36
part 572, subpart M 572.120 |
|
SAE J211/1, Revised March 1995: “Instrumentation for Impact Tests— Part 1: Electronic Instrumentation”
|
572.137
572.146 572.150 572.155 587.12 587.15 |
|
SAE J211/2, Revised March 1995, Instrumentation for Impact Tests—Part 2: Photographic Instrumentation
|
572.137
|
|
SAE J449a–1963 Surface Texture Control
|
581.6(b)(1)
|
|
SAE J599b–1970 Lighting Inspection Code
|
581.5(c)
|
|
SAE J602a–1970 Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units
|
581.5(c)
|
|
SAE J843a–1966 Brake System Road Test Code—Passenger
|
575.101(e)(2)
|
|
SAE J1733 1994–12, Information Report “Sign Convention for Vehicle Crash Testing,”, December 1994
|
Part 572, Subpart M
572.120 572.137 572.140 572.146 572.150 572.155 |