American Association of Textile Chemists and Colorists

Post Office Box 886, Durham, NC

Publication	CFR Reference
AATCC Chart for Measuring Transference of Color	571.209
Standard Test Method 8–1961 Colorfast to Crocking	571.209
Standard Test Method 30–1957T Fungicides, Evaluation of Textiles; Mildew and Rot Resistence of Textiles: Section 1C1, Water Leaching; Section 1C2, Volatilization; Section 1B3, Soil Burial Test	571.209
Standard Test Method 107–1981 Colorfastness to Water	571.209
Geometric Gray Scale	571.209

American National Standards Institute (ANSI)

25 West 43rd Street, 4th Floor, New York, NY 10036; phone: 1 (212) 642–4900; fax: 1 (212) 398–0023; http://webstore.ansi.org/ansidocstore/default.asp
Copies of certain standards may be obtained from RESNA, 1700 North Moore Street, Suite 1540, Arlington, VA22209–1903

Publication	CFR Reference
ANSI/SAE Z26.1, American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways—Safety Standard, 1996	571.5 571.205
ANSI/RESNA Standard WC/Vol. 1–1998, Section 13, “Wheelchairs: Determination of Coefficient of Friction of Test Surfaces“	571.5, 571.403

American Society of Mechanical Engineers (ASME)

Three Park Avenue, New York, NY 10016–5990; phone: 1–800–843–2763 or 1–973–882–1170; fax: 1–973–882–1717; http://www.asme.org/

Publication	CFR Reference
ASME Boiler and Pressure Vessel Code, Section IX, Article II, QW–304 and QW–305 (1992)	571.5 571.304
ASME Boiler and Pressure Vessel Code, Section VIII, UW–12 (1989)	571.5 571.304
ASME Boiler and Pressure Vessel Code, Section VIII, U–1 through U–3, and UW–51 through UW–53 (1989)	571.5 571.304

American Society for Testing and Materials (ASTM)

100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555

Publication	CFR Reference
ASTM 1003–61 Haze and Luminous Transmittance of Transparent Plastic	571.108
ASTM A 166–61T Tentative Specifications for Electrodeposited Coatings of Nickel and Chromium on Steel	571.208 571.209
ASTM A 505–87, Standard Specification for Steel, Sheet and Strip, Alloy, Hot–Rolled and Cold–Rolled, General Requirements for	571.5 571.304
ASTM A 255–89, Standard Method for End–Quench Test for Hardenability of Steel	571.5 571.304
ASTM B 117–64, Standard Method of Salt Spray (fog) Testing	571.106
ASTM B 117–73, Standard Method of Salt Spray (fog) Testing	571.108 571.125 571.209
ASTM B 117–97 Standard Practice for Operating Salt Spray (fog) Apparatus	571.5 571.403
ASTM B 117–03 Standard Practice for Operating Salt Spray (fog) Apparatus	571.106, S6.11
ASTM B 456–79 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chronium	571.209
ASTM B 456–95 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chronium	571.5 571.403
ASTM C 150–77 Standard Specification for Portland Cement	571.108
ASTM D 362–84 Standard Specification for Industrial Grade Toluene	571.108 571.205
ASTM D 445–65 Standard Method of Test for Viscosity of Transparent and Opaque Liquids (Kinematic and Dynamic Viscosity), Appendix 1	571.116
ASTM D 471–98 Standard Test Method for Rubber Property–––Effect of Liquids	571.106, S10.7
ASTM D 484–71 Standard Specifications for Hydrocarbon Dry Cleaning Solvent	571.301
ASTM D 523–62T Tentative Method of Test for Specular Glass	571.107
ASTM D 756–78 Standard Practice for Determination of Weight and Shape Changes of Plastics Under Accelerated Service Conditions	571.209
ASTM D 1056–73 Standard Specifications for Flexible Cellular Materials Sponge or Expanded Rubber	571.213
ASTM D 1121–67 Standard Method of Test for Reserve Alaklinity of Engine Antifreezes and Antirusts, Appendix A1.1, A1.2, and A1.3	571.116
ASTM D 1123–59 Standard Method of Test for Water in Concentrated Engine Anti–Freezes by the Iodine Reagent Method	571.116
ASTM D 1193–70 Standard Specifications for Reagent Water	571.116
ASTM D 1415–68 Tentative Method of Test for International Hardness of Volcanized Natural and Synthetic Rubbers	571.116
ASTM D 1564–71 Standard Method of Testing Flexible Cellular Materials—Slab Urethane Foam	571.213
ASTM D 1565–76 Standard Specifications for Flexible Cellular Materials—Vinyl Chloride Polymers and Copolymers (Open–Cell Foam)	571.213
ASTM D 2343–67, (Reapproved 1985), Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics	571.5 571.304
ASTM D 2344–84, (Reapproved 1989), Standard Test Method for Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short–Beam Method	571.5 571.304
ASTM D 2515–66 Standard Specifications for Kinematic Glass Viscosity	571.116
ASTM D 4329–99, Standard Practice for Fluorescent UV Exposure of Plastics	571.106, S12.7
ASTM E 1–68 Standard Specifications for ASTM Thermometers	571.116
ASTM E 4–64 Methods of Verification of Testing Machines	571.106 571.209
ASTM E 4–72 Methods of Verification of Testing Machines	571.221
ASTM E 4–79 Standard Methods of Load Verification of Testing Machines	571.209
ASTM E 4–03 Standard Practices for Force Verification of Testing Machines	571.106, S6.4, 571.106, S8.9
ASTM E 8–93, Standard Test Methods for Tension Testing of Metallic Materials	571.5 571.304
ASTM E 77–66 Standard Method for Inspection, Test and Standardization of Liquid–in–Glass Thermometers	571.116
ASTM E 274–65T Skid Resistance of Pavements Using a Two Wheel Trailer	571.208 571.301
ASTM E 274–79 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full–Scale Tire	571.105 571.116
ASTM E 298–68 Standard Methods for Assay of Organic Peroxides	571.116
ASTM E 1136–93 (1993), Standard Specification for a Radial Standard Reference Test Tire	571.126 571.500
ASTM E 1137–90, Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire	571.500
ASTM E1337–90 (Reapproved 1996), Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire	571.126
ASTM G 23–81 Standard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) with and without Water for Exposure of Nonmetallic Materials	571.209
ASTM G 151–97 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources	571.106, S12.7
ASTM G 154–00 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials	571.106, S12.7
1985 Annual Book of ASTM Standards, Vol. 5.04, “Motor Fuels”, Section I, A2.3.2, A2.3.3. and A2.7 in Annex 2	571.108 571.205

General Services Administration

Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, Telephone 202–512–1800

Publication	CFR Reference
Federal Specification L–S–300 1965, Sheeting and Tape Reflective: Nonexposed Lens, Adhesive Backing	571.108

Illuminating Engineering Society of North America

345 East 47th St., New York, NY 10017

Publication	CFR Reference
LM–45 IES Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps (April 1980)	571.108

Leet–Melbrook

18810 Woodfield Road, Gaithersburg, Maryland20879(301)670–0090

Publication	CFR Reference
Drawing Package Cover Sheet, Drawing Package: NHTSA Standard Seat Assembly, FMVSS No. 213, NO. NHTSA–213–2003, dated June 3, 2003	571.5 571.213
Drawing No. 2003HA100, Seat Assembly, NHTSA Seat, May 14, 2003	571.5 571.213
Drawing No. 2003HA200, Frame Assembly, NHTSA Seat, May 14, 2003	571.5 571.213
Drawing No. 2003HA201, Frame, Front and Side Assembly, NHTSA Seat, May 7, 2003	571.5 571.213
Drawing No. 2003HA202, Frame, Bottom Assembly, NHTSA Seat, May 14, 2003	571.5 571.213
Drawing No. 2003HA203, Frame, Top Assembly, NHTSA Seat, May 7, 2003	571.5 571.213
Drawing No. 2003HA204, Anchor Points Assembly, NHTSA Seat, May 14, 2003	571.5 571.213
Drawing No. 2003HA205, Frame, Back Assembly, NHTSA Seat, May 7, 2003	571.5 571.213
Drawing No. 2003HA300, Cushion Assembly, NHTSA Seat, May 21, 2003	571.5 571.213
Drawing No. 2003HA301, Cushion, Seat Assembly, NHTSA Seat, May 7, 2003	571.5 571.213
Drawing No. 2003HA302, Cushion, Back Assembly, NHTSA Seat, May 21, 2003	571.5 571.213
Drawing No. 2003HA303, Backing, Seat and Back Assembly, NHTSA Seat, May 21, 2003	571.5 571.213

National Aeronautics and Space Administration

600 Independence Ave. SW., Washington, DC 20546

Publication	CFR Reference
NASA NAS 3–6292, Computer Program for the Analysis of Filament–Reinforced Metal–Shell Pressure Vessels (May 1966)	571.5 571.304

Department of Defense

DODSSP Standardization Document Order Desk, 700 Robbins Ave., Bldg , Philadelphia, PA 19111–5098

Publication	CFR Reference
MIL–S–13192, Shoes, Men's, Dress, 1976	571.208 571.214
MIL–S–13192P, 1988,“Military Specification, Shoes, Men's Dress, Oxford,” Amendment 1, October 14, 1994	571.208
MIL–S–21711E, 1982,“Military Specification, Shoes, Women's,” Amendment 2, October 14, 1994	571.208

National Health Survey Data

Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, Telephone 202–512–1800

Publication	CFR Reference
5th Percentile adult female and 95th Percentile adult male: Public Health Service Pub. No. 1000, Series 11, No. 8, “Weight, Height, and Selected Body Dimensions of Adults”, 1965	571.3

National Highway Traffic Safety Administration

Office of Vehicle Safety Standards, DOT–NHTSA, 400 7th St. SW., Washington, DC 20590

Publication	CFR Reference
Drawing Package, SAS–100–1000, Standard Seat Assembly with Addendum A, Seat Base Weldment, dated July 1, 1993	571.213
Drawing Package, SAS–100–1000, Addendum A, Seat Base Weldment, dated October 23, 1998	571.213

Society of Automotive Engineers

400 Commonwealth Dr., Warrendale, PA 15096–0001, Telephone: (412) 776–4841

Publication	CFR Reference
SAE Recommended Practice J100, Class A Vehicle Glazing Shade Bands, 1995	571.5 571.205
SAE J186a Supplemental High Mounted Stop and Rear Turn Signal Lamps, September 1977	571.108
SAE J211–1980 Instrumentation for Impact Tests	571.218
SAE J211/1, Revised March 1995: “Instrumentation for Impact Tests— Part 1: Electronic Instrumentation”	563.4 563.8 571.5 571.202a 571.208 571.403
SAE J211/1, Revised December 2003, “Instrumentation for Impact Tests—Part 1: Electronic Instrumentation”	571.5 571.209
SAE J211a–1971 Instrumentation for Impact Tests	571.213 571.222
SAE J222–1970 Parking Lamps (Position Lamps)	571.108
SAE J387–NOV 1987 Terminology–Motor Vehicle Lighting	Part 571
SAE J527–1967 Brazed Double Wall Low Carbon Steel Tubing	571.116
SAE J564a–1964 Headlamp Beam Switching	571.108
SAE J565b–1969 Semi–Automatic Headlamp Beam Switching Devices	571.108
SAE J566–1960 Headlamp Mountings	571.108
SAE J567b–1970 Bulb Sockets	571.108
SAE J571d–1976 Dimensional Specification for Sealed Beam Headlamp Units	571.108
SAE J573d–1968 Lamp Bulbs and Sealed Units	571.108
SAE J575, July 1983, Tests for Motor Vehicle Lighting Devices and Components	571.131
SAE J575d–1967 Test for Motor Vehicle Lighting Devices and Components	571.108
SAE J575e–1970 Test for Motor Vehicle Lighting Devices and Components	571.108
SAE J576 JUL91 Plastic Materials for Use in Optical Parts, such as Lenses and Reflectors, of Motor Vehicle Lighting Devices	571.108
SAE J578, May 1988, Color Specification	571.131
SAE J578, June 1995, Color Specification	571.5 571.403
SAE J578c–1977 Color Specification for Electric Signal Lighting Devices	571.108
SAE J578 MAY88 Color Specification for Electric Signal Lighting Devices	571.108
SAE J580–1986 Sealed Beam Headlamp Assembly	571.108
SAE J584–1964 Motorcycle and Motor Driven Cycle Headlamps	571.108
SAE J585d–1970 Tail Lamps (Rear Position Light)	571.108
SAE J585e–1977 Tail Lamps (Rear Position Lamps)	571.108
SAE J586b–1966 Stop Lamps	571.108
SAE J586c–1970 Stop Lamps	571.108
SAE J586 FEB84 Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width	571.108
SAE J587–1981 License Plate Lamps (Rear Registration Plate Lamps)	571.108
SAE J588d–1966 Turn Signal Lamps	571.108
SAE J588e–1970 Turn Signal Lamps	571.108
SAE J588 NOV84 Turn Signal Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width	571.108
SAE J589–1964 Turn Signal Switch	571.108
SAE J590b–1965 Automotive Turn Signal Flashers	571.108
SAE J592–1992 Clearance, Side Marker and Identification Lamps	571.121
SAE J592e–1972 Clearance, Side Marker and Identification Lamps	571.108 571.121
SAE J593c–1968 Backup Lamps	571.108
SAE J594f–1977 Reflex Reflectors	571.108
SAE J599b–1970 Lighting Inspection Code	581.5(c)
SAE J599c–1973 Lighting Inspection Code	571.108
SAE J602–1980 Headlamps Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units	571.108
SAE J673–1993 Automotive Safety Glasses	571.5 571.205
SAE J726a–1962 Recommended Practice, Air Cleaner Test Code	571.209
SAE J759–1995 Recommended Practice, Lighting Identification Code	571.121
SAE J787(g) 1966 Motor Vehicle Seat Belt Anchorage	571.3
SAE J800b–1965 Recommended Practice, Motor Vehicle Seat Belt Installations	571.209
SAE J826–Nov.1962 Manikins for Use in Defining Vehicle Seating Accomodations	571.3(b)(3)
SAE J826–1980 Devices for Use in Defining Vehicle Seating Accommodations	571.3 571.108 571.208 571.214
SAE J826–May 87 Devices for Use in Defining and Measuring Vehicle Seating Accomodation	571.210
SAE J826–1992 Devices for Use in Defining and Measuring Vehicle Seating Accomodations	571.225
SAE J826–revised 1995 Devices for Use in Defining and Measuring Vehicle Seating Accomodations	571.202a
SAE J839b–1965 Passenger Car Side Door Latch System	571.201 571.206
SAE J885a–1966 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design	571.208
SAE J887–1964 School Bus Red Signal Lamps	571.108
SAE J902–1964 Recommended Practice, Passenger Car Windshield Defrosting Systems	571.103
SAE J902a–1967 Passenger Car Windshield Defrosting Systems	571.103
SAE J903a–1966 Passenger Car Windshield Wiper Systems	571.104
SAE J910–1966 Vehicle Hazard Warning Signal Flasher	571.108
SAE J921–1965 Recommended Practice, Instrument Panel Laboratory Impact Test Procedure	571.201
SAE J934–1965 Recommended Practice Vehicle Passenger Door Hinge Systems	571.206
SAE J941–1965 Passenger Car Driver's Eye Range	571.104 571.107
SAE J942–1965 Passenger Car Windshield Washer System	571.104
SAE J944–JUN80 Steering Control System–Passenger Car–Laboratory Test Procedure	571.203
SAE J945b–1966 Vehicular Hazard Warning Signal Flashers	571.108
SAE J964a–1974 Test Procedure for Determining Reflectivity of Rear View Mirrors	571.111
SAE J972–1966 (Revised May 2000) Moving Rigid Barrier Collision Tests	571.105
SAE J977–1966 Instrumentation for Laboratory Impact Tests	571.201
SAE J1100a Motor Vehicle Dimensions	571.3
SAE J1100 Jun84 Motor Vehicle Dimensions	571.210
SAE J1100–1993 Recommended Practice, Motor Vehicle Dimensions	571.225
SAE J1132–1976 Sealed Beam Headlamp Units	571.108
SAE J1133, April 1984, School Bus Stop Arm	571.131
SAE J1383–1985 Performance Requirements for Motor Vehicle Headlamps	571.108
SAE J1395 APR85 Turn Signal Lamps for Use on Motor Vehicles 2032mm or More in Overall Width	571.108
SAE J1398 MAY85 Stop Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width	571.108
SAE J1703 JAN 1995, Motor Vehicle Brake Fluid, Appendix B, SAE RM–66–04 Compatibility Fluid	571.106 571.116
SAE J1733 1994–12, Information Report “Sign Convention for Vehicle Crash Testing,”, December 1994	571.121 Part 572, Subpart M 572.120 572.137 572.140 572.146 572.150 572.155
SAE RM–66–04, Compatibility Fluid, Appendix B of SAE J1703, revised January 1995	571,106, S5.3.9, 571.106, S6.10.2
ANSI/SAE Z26.1, American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways—Safety Standard, 1996	571.5 571.205
SAE Aero Space and Car and Body Measuring Standard	571.202

Suppliers of Advanced Composite Materials Association

1600 Wilson Blvd., Suite 1008, Arlington, VA 22209

Publication	CFR Reference
SACMA SRM 16–90, Recommended Test Method for Tow Tensile Testing of Carbon Fibers	571.5 571.304

United Nations

Conference Services Division, Distribution and Sales Section, Office C.115–1, Palais des Nations, CH–1211, Geneva 10, Switzerland, http://www.unece.org/trans/main/wp29/wp29regs.html

Publication	CFR Reference
“Uniform Provisions Concerning the Approval of Vehicles with Regard to the Installation of Lighting and Light–Signalling Devices”, Economic Commission for Europe Regulation 48:E/ECE/324–E/ECE/TRANS/505, Rev.1/Add.47/Rev.1/Corr.2, p.17 (February 26, 1996)	571.5 571.108
Regulation No. 17: Uniform Provisions Concerning the Approval of Vehicles with regard to the Seats, their Anchorages, and any Head Restraints, Revision 4, dated July 31, 2002	571.202