American National Standards Institute (ANSI)
25 West 43rd Street, 4th Floor, New York, NY 10036; phone: 1 (212) 642–4900; fax: 1 (212) 398–0023; http://webstore.ansi.org/ansidocstore/default.asp
| Publication |
CFR Reference |
ANSI S1.4–1983 (Reaffirmed 2001), Specification for Sound Level Meters
|
227.103(c)(2)(i)
227, Appendix D
|
ANSI S1.11–2004, Specification for Octave–Band and Fractional Octave–Band Analog and Digital Filters
|
227, Appendix D
|
ANSI S1.25–1991 (Reaffirmed 2002), Specification for Personal Noise Dosimeters
|
227.103(c)(2)(iii)
|
ANSI S1.40–1984 (Reaffirmed 2001), Specification for Acoustical Calibrators
|
229, Appendix H
|
ANSI S1.43–1997 (Reaffirmed 2002), Specifications for Integrating–Averaging Sound Level Meters
|
227.103(c)(2)(ii)
229, Appendix H
|
ANSI S3.6–2004, Specification for Audiometers
|
227.111
227, Appendix E
|
ANSI S12.6–1997 (Reaffirmed 2002), Methods for Measuring the Real–Ear Attenuation of Hearing Protectors
|
227, Appendix B
|
ANSI Z41–1991, American National Standard for Personal Protection–Protective Footwear
|
214.115
|
ANSI Z87.1–1989, Practice for Occupational and Educational Eye and Face Protection
|
214.117
|
ANSI Z89.1–1986, Protective Headwear for Industrial Workers
|
214.113
|
American Public Transit Association
1201 New York Avenue NW., Washington, DC 20005
| Publication |
CFR Reference |
APTA Standard SS–M–005–98, Code of Tests for Passenger Car Equipment Using Single Car Testing Device (March 1998)
|
238.311
|
APTA Standard SS–C&S–020–03, Standard for Passenger Rail Vehicle Structural Repair (September 2003)
|
238.229(j)(1)(i)
238.230(c)(2)
|
American Railway Engineering and Maintenance of Way Association (AREMA)
8201 Corporation Drive, Suite 1125, Landover, MD 20785–2230
| Publication |
CFR Reference |
AREMA Communications and Signal Manual, Volume 4, Section 17: “Quality Principles”, 2005
|
236.909
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
| Publication |
CFR Reference |
ASTM C 90–70 Standard Specification for Hollow Load–Bearing Concrete Masonry Units
|
Part 223, Appendix A
|
ASTM C 33–77 Standard Specification for Lightweight Aggregates for Concrete Masonry Units
|
Part 223, Appendix A
|
ASTM C 1166–00, Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
|
Part 238, Appendix B
|
ASTM D 2724–87, Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
|
Part 238, Appendix B
|
ASTM D 3574–95, Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
|
Part 238, Appendix B
|
ASTM D 3675–98, Standard Test Method for Surface Flammability of Flexible Cellular Materials Using Radiant Heat Energy Source
|
Part 238, Appendix B
|
ASTM D 4956–04, Standard Specification for Retroreflective Sheeting for Traffic Control
|
224.103
|
ASTM D 4956–07, Standard Specification for Retroreflective Sheeting for Traffic Control, 2007
|
238.5
|
ASTM E 119–00a, Standard Test Methods for Fire Tests of Building Construction and Materials
|
Part 238, Appendix B
|
ASTM E 162–98, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
|
Part 238, Appendix B
|
ASTM E 648–00, Standard Test Method for Critical Radiant Flux of Floor–Covering Systems Using a Radiant Heat Energy Source
|
Part 238, Appendix B
|
ASTM E 662–01, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
|
Part 238, Appendix B
|
ASTM E 1354–99, Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
|
Part 238, Appendix B
|
ASTM E 1537–99, Standard Test Method for Fire Testing of Upholstered Furniture
|
Part 238, Appendix B
|
ASTM E 1590–01, Standard Test Method for Fire Testing of Mattresses
|
Part 238, Appendix B
|
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; phone: 1–800–843–2763 or 1–973–882–1170; fax: 1–973–882–1717; http://www.asme.org/
Association of American Railroads
50 F St. NW, Washington, DC 20001
| Publication |
CFR Reference |
AAR Standard S–486–01, Section 3.0: “Tests—Standard Freight Brake Equipment”, January 1, 2001
|
232.305
|
AAR Standard S–486–01, Section 4.0: “Special Tests”, January 1, 2001
|
232.305
|
AAR Standard S–469–47, “Performance Specification for Freight Brakes”, April 1, 1999
|
232.103
|
AAR Standard S–580: “Locomotive Crashworthiness Requirements,” revised July 2005
|
229.205
229.206
|
AAR Standard S–5506: “Performance Requirements for Diesel Electric Locomotive Fuel Tanks,” revised 2001
|
229.217
|
AAR Code of Rules for Cars in Interchange, 1979
|
232.17(b)
|
AAR Code of Tests, Instruction Pamphlet No. 5039–4, Sup. 1, Single Car Testing Device, 1974
|
232.17(a)
|
AAR Railway Signaling Principles and Practices, Ch. 2: Symbols, Aspects and Indications, 1956
|
235.12(b)
|
General Services Administration
Federal Supply Service, Specification Section, 470 East L'Enfant Plaza, SW., Suite 8100, Washington, DC 20407
| Publication |
CFR Reference |
FED–STD–191A, Textile Test Method 5830, Leaching Resistance of Cloth; Standard Method, July 20, 1978
|
Part 238, Appendix B
|
Illuminating Engineering Society (IES)
Federal Railroad Administration, Office of the Associate Administrator, Nassif Bldg., 400 Seventh St. SW., Washington, DC 20590
| Publication |
CFR Reference |
IES Guide for Calculating the Effective Intensity of Flashing Signal Lights, Nov. 1964
|
221.5(h)
|
Institute of Electircal and Electronics Engineers, Inc. (IEEE)
345 East 47th Street, New York, NY 10017
| Publication |
CFR Reference |
ANSI/IEEE Std. 383–1974, IEEE Standard for Type Test of Class 1E Electrical Cables, Field Splices, and Connections for Nuclear Power Generating Stations
|
Part 238, Appendix B
|
National Electrical Manufacturers Association (NEMA)
1300 North 17th Street, Suite 1847, Rosslyn, VA 22209; Telephone: (703) 841–3200; FAX: (703) 841–3300
| Publication |
CFR Reference |
NEMA WC 3/ICEA S–19–1981, Rubber Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy (part 6, section 19, paragraph 6) Revision 1, 6th edition, February 1994
|
Part 238, Appendix B
|
State of California Department of Consumer Affairs
Bureau of Home Furnishings and Thermal Insulation, 3485 Orange Grove Ave., North Highlands, CA 95660–5595
| Publication |
CFR Reference |
California Technical Bulletin (CAL TB)129, Flammability Test Procedure for Mattresses for Use in Public Buildings, October 1992
|
Part 238, Appendix B
|
California Technical Bulletin 133, Flammability Test Procedure for Seating Furniture for Use in Public Occupancies, January 1991
|
Part 238, Appendix B
|
Underwriters Laboratories, Inc. (UL)
333 Pfingsten Road, Northbrook, IL 60062–2096
| Publication |
CFR Reference |
UL 44, Standard for Safety of Thermoset–Insulated Wires and Cables, 14th edition, January 27, 1997
|
Part 238, Appendix B
|
UL 83, Standard for Safety for Thermoplastic–Insulated Wires and Cables, 12th edition, September 29, 1998
|
Part 238, Appendix B
|