The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .
400 North Capitol Street NW, Washington, DC 20001 or from ILI Infodisk, Inc., 610 Winters Avenue, Paramus, NJ 07652
| Publication | CFR Reference |
|---|---|
|
AGA Pipeline Research Committee, Project PR–3–805, A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe, December 1989
|
192.933(a)
192.485(c) 195.3 195.452 (h)(4)(i)(B) |
|
AGA Purging Principles and Practice, Third edition, 2001
|
193.2013
193.2513 193.2517 193.2615 |
25 West 43rd Street, 4th Floor, New York, NY 10036; phone: 1 (212) 642–4900; fax: 1 (212) 398–0023; http://webstore.ansi.org/ansidocstore/default.asp
| Publication | CFR Reference |
|---|---|
|
ANSI B 16.9–78 Factory Made Wrought Steel Butt–Welding Fittings
|
195.118
|
|
ANSI B 31.4–79 Liquid Petroleum Transportation Piping Systems
|
195.110
|
1220 L St. NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
| Publication | CFR Reference |
|---|---|
|
API Specification 5L “Specification for Line Pipe” 43rd edition and errata (2004)
|
192.7
192.55(e) 192.113 Item I of Appendix B part 192 195.3 195.106 |
|
API Recommended Practice 5L1 “Recommended Practice for Railroad Transportation of Line Pipe” (6th edition, 1992)
|
192.7
192.65 |
|
API Specification 6D “Specification for Pipeline Valves (Gate, Plug, Ball, and Check Valves)” (22nd edition, 2002. Also issued as ISO 14313–1999)
|
192.7
192.145 195.3 195.116 |
|
API Specification 12 F “Specification for Shop Welded Tanks for Storage of Production Liquids” (11th edition, November 1, 1994)
|
195.3
195.132 195.205 195.264 195.307 195.565 195.579 |
|
API Recommended Practice 80 “Guidelines for the Definition of Onshore Gas Gathering Lines,” First edition, April 2000
|
192.7
192.8 |
|
API Standard 510 “Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair, and Alteration” (8th edition, June 1997, and Addenda 1 through 4)
|
195.3
195.205 195.432 |
|
API Standard 620 “Design and Construction of Large, Welded, Low–Pressure Storage Tanks” (10th edition, 2002)
|
195.3
195.132 195.205 195.264 195.307 |
|
API Standard 650 “Welded Steel Tanks for Oil Storage” Tenth edition, 1998, with Addendum 1 dated January 2000, Addendum 2 dated November 2001, and Addendum 3 dated September 2003
|
195.3
195.132 195.205 195.264 195.307 195.565 195.579 |
|
API Standard 651 “Cathodic Protection of Aboveground Petroleum Storage Tanks” (2nd edition, December 1997)
|
195.3
195.565 195.579 |
|
API Standard 652 “Lining of Aboveground Petroleum Storage Tank Bottoms” (2nd edition, December 1997)
|
195.3
195.579 |
|
API Standard 653 “Tank Inspection, Repair, Alteration, and Reconstruction” (3rd edition, 2001, and Addendum 1, 2003)
|
195.3
195.205 195.432 |
|
API Standard 1104 “Welding of Pipelines and Related Facilities” (19th edition, 1999, including its October 31, 2001 errata)
|
192.7
192.227(a) 192.229(c)(1) 192.241(c) Item II, Appendix B to Part 192 195.3 195.222 195.228 |
|
API 1130, “Computational Pipeline Monitoring for Liquid Pipelines”, Second edition, 2002
|
195.3, 195.134, 195.444
|
|
API Recommended Practice 1162, “Public Awareness Programs for Pipeline Operators,” First Edition, December 2003
|
192.7
192.616 195.3 195.440 |
|
API Standard 2000 “Venting Atmospheric and Low–Pressure Storage Tanks” (5th edition, 1998 and errata)
|
195.3
195.264 |
|
API Standard 2003 “Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents” (6th edition, December 1998)
|
195.3
195.405 |
|
API Standard 2026 “Safe Access/Egress Involving Floating Roofs of Storage Tanks in Petroleum Service” (2nd edition, April 1998)
|
195.3
195.405 |
|
API Standard 2350 “Overfill Protection for Storage Tanks in Petroleum Facilities” (2nd edition, January 1996)
|
195.3
195.428 |
|
API Standard 2510 “Design and Construction of LPG Installations (8th edition, 2001)
|
195.3
195.132 195.205 195.264 195.307 195.428 195.432 |
Parallel Centre, 1801 Alexander Bell Drive, Reston, Virginia 20191–4400
| Publication | CFR Reference |
|---|---|
|
ASCE 7–02 “Minimum Design Loads for Buildings and Other Structures” (Second edition, 2002)
|
193.2013
193.2067 |
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
Boiler and Pressure Vessel Code:
| Publication | CFR Reference |
|---|---|
|
Section I, Division I: Rules for Construction of Power Boilers, including Addenda through 2005
|
192.7
192.153(a) |
|
Section VIII, Division 1, Rules for Construction of Pressure Vessels (2004, including Addenda through July 1, 2005)
|
192.7
192.153 192.165 193.2013 193.2321 195.3 195.124 195.307 |
|
Section VIII, Division 2, Rules for Construction of Pressure Vessels: Alternative Rules, including Addenda through July 1, 2005
|
192.7
192.153 192.165 193.2321 195.3 195.307 |
|
Section IX Welding and Brazing Qualifications (2001), including Addenda through July 1, 2005
|
192.7
192.227 Item II, Appendix B to part 192 195.3 195.222 |
|
ASME/ANSI B16.1 Cast Iron Pipe Flanges and Flanged Fittings (1998)
|
192.7
192.147(c) |
|
ASME/ANSI B16.5–2003 Pipe Flanges and Flanged Fittings (October 2004)
|
192.7
192.147 192.279 |
|
ASME/ANSI B16.9–2003 Factory–Made Wrought Steel Butt Welding Fittings (February 2004)
|
195.3
195.118 |
|
ASME/ANSI B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids, 2002
|
195.3
195.452(h)(4)(i)(B) |
|
ASME/ANSI B31.8–2003 Gas Transmission and Distribution Piping Systems (Published February 2004)
|
192.619
195.3 195.5 195.406 |
|
ASME/ANSI B31.8S–2004 (Supplement to B31.8), Managing System Integrity of Gas Pipelines,
|
192.7
192.903 192.907 192.911 192.913 192.917 192.921 192.923 192.925 192.927 192.929 192.933 192.935 192.937 192.939 192.945 |
|
ASME/ANSI B31G, Manual for Determining the Remaining Strength of Corroded Pipelines, 1991 (Reaffirmed 2004)
|
192.485
192.933 195.3 195.452 (h)(4)(i)(B) 195.452 (h)(4)(iii)(D) |
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
Noncurrent ASTM standards are available from: Engineering Societies Library, 345 E. 47th St., New York, NY 10017.
| Publication | CFR Reference |
|---|---|
|
ASTM A 53/A53M–04a Standard Specification for Pipe, Steel, Black and Hot–Dipped, Zinc–Coated, Welded and Seamless
|
192.7
192.113 item I, Appendix B to part 192 195.3 195.106 |
|
ASTM A 106/A 106M–04b, Standard Specification for Seamless Carbon Steel Pipe for High–Temperature Service
|
192.7
192.113 Item I, Appendix B to Part 192 195.3 195.106 |
|
ASTM A 333/A 333M–05 Standard Specification for Seamless and Welded Steel Pipe for Low–Temperature Service
|
192.7
192.113 Item 1, Appendix B to part 192 195.3 195.106 |
|
ASTM A 372/A 372M–03 Standard Specification for Carbon and Alloy Steel Forgings for Thin–Walled Pressure Vessels
|
192.7
192.177 |
|
ASTM A 381–96 (Reapproved 2001) Standard Specification for Metal–Arc–Welded Steel Pipe for Use With High–Pressure Transmission Systems
|
192.7
192.113 Item 1, Appendix B to part 192 195.3 195.106 |
|
ASTM A 671–04 Standard Specification for Electric–Fusion–Welded Steel Pipe for Atmospheric and Lower Temperatures
|
192.7
192.113 Item 1, Appendix B to part 192 195.3 195.106 |
|
ASTM A 672–96 (Reapproved 2001) Standard Specification for Electric–Fusion–Welded Steel Pipe for High–Pressure Service at Moderate Temperatures
|
192.7
192.113 Item I, Appendix B to part 192 195.3 195.106 |
|
ASTM A 691–98 (Reapproved 2002) Standard Specification for Carbon and Alloy Steel Pipe, Electric–Fusion–Welded for High–Pressure Service at High Temperatures
|
192.7
192.113 Item 1, Appendix B to part 192 195.3 195.106 |
|
ASTM D 638–03 Standard Test Method for Tensile Properties of Plastics
|
192.7
192.283(a)(3) 192.283(b)(1) |
|
ASTM D 2513–87 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
|
192.7
192.63(a)(1) |
|
ASTM D 2513–99 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
|
192.7
192.191(b) 192.281(b)(2) 192.283(a)(1)(i) Item 1, Appendix B to part 192 |
|
ASTM D 2517–2000 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
|
192.7
192.191 192.281 192.283 Item 1, Appendix B to part 192 |
|
ASTM F 1055 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing (1998)
|
192.7
192.283 |
1700 S. Mount Prospect Road, Des Plaines, IL 60018
| Publication | CFR Reference |
|---|---|
|
GRI–89/0176, LNGFIRE: A Thermal Radiation Model for LNG Fires, June 29, 1990
|
193.2057
|
|
GRI–96/0396.5—Evaluation of Mitigation Methods for Accidential LNG Releases, Volume 5: Using FEM3A for LNG Accident Consequence Analyses, April 1997
|
193.2059
|
|
GRI–02/0057—Final Report: Internal Corrosion Direct Assessment of Gas Transmission Pipelines—Methodology, Published April 1, 2002
|
192.7
192.927 |
|
GTI–04/0049; DEGADIS 2.1 “Dense Gas Dispersion Model for LNG Vapor Dispersion,” April 2004
|
193.2013
193.2059 |
127 Park Street NE, Vienna, Virginia 22180
| Publication | CFR Reference |
|---|---|
|
MSS SP–44–96 Steel Pipe Line Flanges 1996, (Reaffirmed 2001)
|
192.147
|
|
MSS SP–75 Specification for High–Test Wrought Butt Welding Fittings, 2004
|
195.3
195.118 |
1440 South Creek Drive, Houston, TX 77084
| Publication | CFR Reference |
|---|---|
|
NACE Standard RP0169–2002, Control of External Corrosion on Underground or Submerged Metallic Piping Systems
|
195.3
195.571 195.573(a)(2) |
|
NACE RP–0502–2002: NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology
|
192.923
192.925 192.931 192.935 192.939 195.3 195.588 |
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
| Publication | CFR Reference |
|---|---|
|
ANSI/NFPA 30 Flammable and Combustible Liquids Code, 2003
|
192.7
192.735(b) 195.264 |
|
ANSI/NFPA 58 Liquefied Petroleum Gas Code (LP–Gas Code), 2004
|
192.7
192.11 |
|
ANSI/NFPA 59 Utility LP–Gas Plant Code, 2004
|
192.7
192.11 |
|
ANSI/NFPA 59A Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG), 2001 edition
|
193.2013
193.2019 193.2051 193.2057 193.2059 193.2101 193.2301 193.2303 193.2401 193.2521 193.2639 193.2801 |
|
NFPA 59A Storage and Handling Liquefied Natural Gas, 1972
|
193.2005(c)
|
|
NFPA 59A Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG), 1996
|
193.2019
|
|
ANSI/NFPA 70 National Electrical Code, 2005
|
192.7
192.163 192.189 |
1825 Connecticut Avenue NW, Suite 680, Washington DC, 20009
| Publication | CFR Reference |
|---|---|
|
PPI TR–3/2004 “Policies and Procedures for Developing Hydrostatic Design Bases (HDB), Pressure Design Bases (PDB), and Minimum Required Strength (MRS) Ratings for Thermoplastic Piping Materials or pipe”
|
192.7
192.121 |