American Boat and Yacht Council

3069 Solomon's Island Road, Edgewater, MD 21037

Publication	CFR Reference
P–1 Safe Installation of Exhaust Systems for Propulsion and Auxiliary Machinery, 1973	58.10-5

American Bureau of Shipping

Publications Department, ABS Plaza, 16855 Northchase Drive, Houston, Texas, 77060

Publication	CFR Reference
Rules for Building and Classing Steel Vessels, 1989	58.01 58.05 58.10, 58.20, 58.25
Rules for Building and Classing Steel Vessels, 1986	62.25-1 62.25-5 62.25-30 62.35-35 62.35-40 62.35-50 62.50-30 62.50-30

American Gas Association (AGA)

1515 Wilson Boulevard, Arlington, Virginia 22209

Publication	CFR Reference
AGA Z21.22–86 Relief Valves and Automatic Shutoff Devices for Hot Water Supply Systems, March 28, 1986	63.25-3

American National Standards Institute (ANSI)

25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900

Publication	CFR Reference
ANSI B1.1–82 Unified Inch Screw Threads (UN and UNR Thread Form)	56.60-1 56.25-20
ANSI B1.20.1–83 Pipe Threads, General Purpose (Inch)	56.60-1
ANSI B1.20.3–76 (reaffirmed 1982) Dryseal Pipe Threads (Inch)	56.60-1
ANSI B2.1–68 Pipe Threads	56.60-1
ANSI B16.1–75 C.I. Flanges and Fittings	56.60-1 56.60-10 56.60-15
ANSI B16.3–85 Maleable Iron Threaded Fittings, Classes 150 and 300	56.60-1
ANSI B16.4–85 Cast Iron Threaded Fittings, Classes 125 and 250	56.60-1
ANSI B16.5–77 Steel Pipe Flanges and Pipe Fittings	56.20-1 56.30-10 56.60-1 56.60-15
ANSI B16.9–86 Factory–made Wrought Steel Buttwelding Fittings	56.60-1
ANSI B16.10–86 Face–to–face and End–to–end Dimensions of Valves	56.60-1
ANSI B16.11–80 Forged Steel Fittings, Socket–welded and Threaded	56.30-5 56.60-1
ANSI B16.14–83 Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads	56.60-1
ANSI B16.15–85 Cast Bronze Threaded Fittings, Classes 125 and 250	56.60-1
ANSI B16.18–78 Cast Brass Solder–Joints	56.60-1
ANSI B16.20–73 Ring Joint Gaskets, Steel Flanges	56.60-1
ANSI B16.21–78 Non–metallic Gaskets for Flanges	56.60-1
ANSI B16.22–80 Wrought Copper and Bronze Solder Joint Fittings	56.60-1
ANSI B16.23–76 Cast Bronze Solder–Joint Drainage	56.60-1
ANSI B16.24–79 Brass or Bronze Flanges and Fittings	56.60-1
ANSI B16.25–86 Buttwelding Ends	56.30-5 56.60-1 56.70-10
ANSI B16.28–86 Wrought Steel Buttwelding Short Radius Elbows and returns	56.60-1
ANSI B16.29–86 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings–DWV	56.60-1
ANSI B16.34–88 Valves–Flanged, Threaded, and Welding End	56.20-1 56.60-1
ANSI B16.42–87 Ductile Iron Pipe Flanges and Flanged Fittings, Clases 150 and 300	56.60-1
ANSI B18.2.1–81 Square and Hex Bolts and Screws, Inch Series	56.25-20 56.60-1
ANSI B18.2.2–87 Square and Hex Nuts (Inch Series)	56.25-20 56.60-1
ANSI B31.1–86 Power Piping	Part 56
ANSI B31.3–87 Chemical Plant and Petroleum Refinery Piping	58.60
ANSI B31.5–87 Refrigeration Piping	58.20
ANSI B36.10M–85 Welded and Seamless Wrought Steel Pipe	56.07-5 56.30-20 56.60-1
ANSI B36.19M–85 Stainless Steel Pipe	56.07-5 56.60-1
ANSI B93.5–79 Recommended Practice for the Use of Fire Resistant Fluids for Fluid Power Systems	58.30-10
ANSI Z21.22–79 Temperature—Pressure Relief Valves	63.15-30

American Petroleum Institute (API)

1220 L Street NW., Washington, DC 20005–4070; Telephone: (202) 682–8000

Publication	CFR Reference
API RP 14C Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms	58.60
API RP 53, Recommended Practice for Blowout Prevention Systems for Drilling Wells	58.60

American Society of Mechanical Engineers (ASME)

Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME

Publication	CFR Reference
ANSI/ASME CSD–1–1982 with Addenda CSD–1A–1984, Controls and Safety Devices for Automatically Fired Boilers, November 15, 1984	63.10-1 63.15-1 63.20
Section I, Power Boilers, July 1989 with 1989 addenda	52.01 52.05 52.15 52.20 52.25 58.30 59.10
Section I, Power Boilers, 1986 edition through 1988 addenda	56.15-1 56.15-5 56.15-10 56.60-1 56.70-15 56.95-10
Section III, Division I, Rules for the Construction of Nuclear Power Plant Components, July 1989 with 1989 addenda	58.30
Section IV, Heating Boilers, July 1989 with 1989 addenda	53.01 53.05 53.10 53.12
Section VII, Recommended Guidelines for the Care of Power Builders, July 1989 with 1989 addenda	59.01
Section VIII, Division I, Pressure Vessels, 1986 edition through 1988 addenda	56.01-6 56.15-1 56.15-5 56.15-10 56.25-5 56.30-10 56.30-30 56.60-1 56.60-15 56.95-10 64.61
Section VIII, Division I, Pressure Vessels, July 1989 with 1989 addenda	54.01 54.03 54.05 54.10 54.15 54.20 54.25 54.30 58.30 59.10
Section VIII, Division I, Pressure Vessels, 1989 edition, with addenda issued December 31, 1989	64.2 64.5 64.7 64.11 64.13 64.21 64.25 64.31
Section IX, Welding and Brazing Qualifications, 1986 edition through 1988 addenda	56.70-5 56.70-20 56.75-20 56.85-10
Section IX, Welding and Brazing Qualifications, July 1989 with 1989 addenda	57.01 57.02 57.03 57.04 57.05 57.06 59.10

American Society for Testing and Materials

100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555

Publication	CFR Reference
ASTM A 20–80 Steel Plates for Pressure Vessels	54.25-10
ASTM A 20/A 20 M–97a, Standard Specification for General Requirements for Steel Plates for Pressure Vessels	54.01-1 54.05-10 54.25-10
ASTM A 36–81a Structural Steel	56.30-10
ASTM A 36/A 36 M–97a, Standard Specification for Carbon Structural Steel	56.01-2 56.30-10
ASTM A 47–90 (1995), Standard Specification for Ferritic Malleable Iron Castings	56.01-2 56.60-1
ASTM A 53–98, Standard Specification for Pipe, Steel, Black and Hot–Dipped, Zinc–Coated, Welded and Seamless	56.01-2 56.10-5 56.60-1
ASTM A 106–95, Standard Specification for Seamless Carbon Steel Pipe for High–Temperature Service	56.01-2 56.60-1
ASTM A 126–95, Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings	56.01-2 56.60-1
ASTM A 134–80 Electric–Fusion (Arc)–Welded Steel Plate Pipe (Sizes 16 in. and over)	56.60-1
ASTM A 134–96, Standard Specification for Pipe, Steel, Electric–Fusion (Arc)–Welded (Sizes NPS 16 and Over)	56.01-2 56.60-1
ASTM A 135–97c, Standard Specification for Electric–Resistance–Welded Steel Pipe	56.01-2 56.60-1
ASTM A 139–96, Standard Specification for Electric–Fusion (Arc)–Welded Steel Pipe (NPS 4 and Over)	56.01-2 56.60-1
ASTM A 178–84a Electric–Resistance Welded Carbon Steel Boiler Tubes	56.60-1
ASTM A 178/A 178 M–95, Standard Specification for Electric–Resistance–Welded Carbon Steel and Carbon–Manganese Steel Boiler and Superheater Tubes	56.01-2 56.60-1
ASTM A 179–84 Seamless Cold–Drawn Low Carbon Steel Heat Exchanger and Condenser Tubes	56.60-1
ASTM A 179/A 179M–90a (1996), Standard Specification for Seamless Cold–Drawn Low–Carbon Steel Heat–Exchanger and Condenser Tubes	56.01-2 56.60-1
ASTM A 182–84c Forged or Rolled Alloy–Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High–Temperature Service	56.60-105
ASTM A 182/A 182M–97c, Standard Specification for Forged or Rolled Alloy–Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High–Temperature Service	56.01-2 56.50-105
ASTM A 192–84a Seamless Carbon Steel Boiler Tubes for High–Pressure Service	56.60-1
ASTM A 192/A 192M–91(1996), Standard Specification for Seamless Carbon Steel Boiler Tubes for High–Pressure Service	56.01-2 56.60-1
ASTM A 193–90 Alloy–Steel and Stainless Steel Bolting Materials for High Temperature Service	58.30
ASTM A 193/A 193M–98a, Standard Specification for Alloy–Steel and Stainless Steel Bolting Materials for High–Temperature Service	58.03-1 58.30-15
ASTM A 194–84a Carbon and Alloy Steel Nuts for Bolts for High–Pressure and High–Temperature Service	56.50-105
ASTM A 194/A 194M–98b, Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both	56.01-2 56.50-105
ASTM A 197–79 Cupola Malleable Iron	56.60-1
ASTM A 197–87 (1992), Standard Specification for Cupola Malleable Iron	56.01-2 56.60-1
ASTM A 199–84 Seamless Cold Drawn Intermediate Alloy–Steel Heat–Exchanger and Condenser Tubes	56.60-1
ASTM A 203–80 Pressure Vessel Plates, Alloy Steel, Nickel	54.05-20
ASTM A 203/A 203 M–97, Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel	54.01-1 54.05-20
ASTM A 210/A 210 M–96, Standard Specification for Seamless Medium–Carbon Steel Boiler and Superheater Tubes	56.01-2 56.60-1
ASTM A 210–84a Seamless Medium Carbon Steel Boiler & Super Heater Tubes	56.60-1
ASTM A 213/A 213 M–95a, Standard Specification for Seamless Ferritic and Austenitic Alloy–Steel Boiler, Superheater, and Heat–Exchanger Tubes	56.01-2 56.60-1
ASTM A 213–84b Seamless Ferritic and Austenitic Alloy–Steel Boiler, Superheater, and Heat–Exchanger Tubes	56.60-1
ASTM A 214/A 214 M–96, Standard Specification for Electric–Resistance–Welded Carbon Steel Heat–Exchanger and Condenser Tubes	56.01-2 56.60-1
ASTM A 214–84a Electric–Resistance–Welded Carbon Steel Heat Exchanger and Condenser Tubes	56.60-1
ASTM A 226/A 226 M–95, Standard Specification for Electric–Resistance–Welded Carbon Steel Boiler and Superheater Tubes for High–Pressure Service	56.01-2 56.60-1
ASTM A 226–84a Electric Resistance–Welded Carbon Steel Boiler and Superheater Tubes for High–Pressure Service	56.60-1
ASTM A 234/A 234 M–97, Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service	56.01-2 56.60-1
ASTM A 234–84a Piping Fittings for Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures	56.60-1
ASTM A 249/A 249 M–96a, Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat–Exchanger, and Condenser Tubes	56.01-2 56.60-1
ASTM A 249–84b Welded Austenitic Steel Boiler, Superheater, Heat–Exchanger, and Condenser Tubes	56.60-1
ASTM A 268/A 268 M–96, Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service	56.01-2 56.60-1
ASTM A 268–84a Seamless and Welded Ferritic Stainless Steel Tubing for General Service	56.60-1
ASTM A 276–98, Standard Specification for Stainless Steel Bars and Shapes	56.01-2 56.60-2
ASTM A 276–83 Stainless and Heatresisting Steel Bars and Shapes	56.60-2
ASTM A 307–97, Standard Specification for Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength	56.01-2 56.25-20
ASTM A 307–84 Carbon Steel Externally Threaded Standard Fasteners	56.25-20
ASTM A 312/A 312 M–95a, Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes	56.01-2 56.50-105 56.60-1
ASTM A 312–84c Seamless and Welded Austenitic Stainless Steel Pipe	56.50-105 56.60-1
ASTM A 320/A 320 M–97, Standard Specification for Alloy/Steel Bolting Materials for Low Temperature–Service	56.01-2 56.50-105
ASTM A 320–84a Alloy–Steel Bolting Materials for Low–Temperature Service	56.50-105
ASTM A 333–84b Seamless and Welded Steel Pipe for Low–Temperature Service	56.50-105 56.60-1
ASTM A 333/A 333 M–94, Standard Specification for Seamless and Welded Steel Pipe for Low–Temperature Service	56.01-2 56.50-105 56.60-1
ASTM A 334–84b Seamless and Welded Carbon and Alloy–Steel Tubes for Low–Temperature Service	56.50-105 56.60-1
ASTM A 334/A 334 M–96, Standard Specification for Seamless and Welded Carbon and Alloy–Steel Tubes for Low–Temperature Service	56.01-2 56.50-105 56.60-1
ASTM A 335–85a Seamless Ferritic Alloy Steel Pipe for High–Temperature Service	56.60-1
ASTM A 335/A 335 M–95a, Standard Specification for Seamless Ferritic Alloy–Steel Pipe for High–Temperature Service	56.01-2 56.60-1
ASTM A 350–84a Forgings, Carbon and Low–Alloy Steel, Requiring Notch Toughness Testing for Piping Components	56.50-105
ASTM A 350/A 350 M–97, Standard Specification for Carbon and Low–Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components	56.01-2 56.50-105
ASTM A 351–84/A 351M–84b Steel Castings, Austenitic, for High–Temperature Service	56.50-105
ASTM A 351/A351 M–94a, Standard Specification for Castings, Austenitic, Austenitic–Ferritic (Duplex), for Pressure–Containing Parts	56.01-2 56.50-105
ASTM A 352/A 352M–84a Steel Castings, Ferritic and Martensitic, for Pressure Containing Parts, Suitable for Low–Temperature Service	56.50-105
ASTM A 352/A 352 M–93 (1998), Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure–Containing Parts, Suitable for Low–Temperature Service	56.01-2 56.50-105
ASTM A 358–84b Electric–Fusion–Welded Austenitic Chromium–Nickel Alloy Steel Pipe for High–Temperature Service	56.60-1
ASTM A 358/A 358 M–95a, Standard Specification for Electric–Fusion–Welded Austenitic Chromium–Nickel Alloy Steel Pipe for High–Temperature Service	56.01-2 56.60-1
ASTM A 369/A 369 M–92, Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High–Temperature Service	56.01-2 56.60-1
ASTM A 369–84 Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High–Temperature Service	56.60-1
ASTM A 370–97a, Standard Test Methods and Definitions for Mechanical Testing of Steel Products	54.01-1 54.25-20
ASTM A 370–77 Mechanical Testing of Steel Products	54.25-20
ASTM A 376–84b Seamless Austenitic Steel Pipe for High–Temperature Central–Station Service	56.07-10 56.60-1 56.60-2
ASTM A 376/A 376 M–96, Standard Specification for Seamless Austenitic Steel Pipe for High–Temperature Central–Station Service	56.01-2 56.07-10 56.60-1 56.60-2
ASTM A 395/A 395 M–98, Standard Specification for Ferritic Ductile Iron Pressure–Retaining Castings for Use at Elevated Temperatures	56.01-2 56.50-60 56.60-1 56.60-15
ASTM A 395–80 Ferritic Ductile Cast Iron Pressure–Retaining Castings for use at Elevated Temperatures	56.60-1
ASTM A 403–84a Wrought Austenitic Stainless Steel Piping Fittings	56.60-1
ASTM A 403/A 403 M–98, Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings	56.01-2 56.60-1
ASTM A 420/A 420 M–96a, Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low–Temperature Service	56.01-2 56.50-105 56.60-1
ASTM A 420–84 Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low–Temperature Service	56.50-105 56.60-1
ASTM A 430–84a Austenitic Steel, Forged and Bored Pipe for High–Temperature Service	56.60-1
ASTM A 520–97, Standard Specification for Supplementary Requirements for Seamless and Electric–Resistance–Welded Carbon Steel Tubular Products for High–Temperature Service Conforming to ISO Recommendations for Boiler Construction	56.01-2 56.60-1
ASTM A 520–72 (R 79) Supplementary Requirements Seamless and Electrical–Resistance–Welded Carbon Steel Tubular Products for High Temperature Service Conforming to ISO Recommendations for Boiler Construction	56.60-1
ASTM A 522–81 Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low–Temperature Service	56.50-15
ASTM A 522/A 522 M–95b, Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low–Temperature Service	56.01-2 56.50-105
ASTM A 536–84 (1993), Standard Specification for Ductile Iron Castings	56.01-2 56.60-1
ASTM A 575–81 Steel Bars, Carbon, Merchant Quality, M–Grades	56.60-2
ASTM A 575–96, Standard Specification for Steel Bars, Carbon, Merchant Quality, M–Grades	56.01-2 56.60-2
ASTM A 576–81 Steel Bars, Carbon, Hot–Wrought, Special Quality	56.60-2
ASTM A 576–90b (1995), Standard Specification for Steel Bars, Carbon, Hot–Wrought, Special Quality	56.01-2 56.60-2
ASTM B 16–85 Free–cutting Brass Rod, and Shapes for use in Shapes for use in Screw Machines	56.60-2
ASTM B 16–92, Standard Specification for Free–Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines	56.01-2 56.60-2
ASTM B 21–83b Naval Brass Rod, Bar and Shapes	56.60-2
ASTM B 21–96, Standard Specification for Naval Brass Rod, Bar, and Shapes	56.01-2 56.60-2
ASTM B 26–84 Aluminum–Alloy sand Castings	56.60-2
ASTM B 26/B 26M–97, Standard Specification for Aluminum–Alloy Sand Castings	56.01-2 56.60-2
ASTM B 42–84a Seamless Copper Pipe, Standard Sizes	56.60-1
ASTM B 42–96, Standard Specification for Seamless Copper Pipe, Standard Sizes	56.01-2 56.60-1
ASTM B 43–84a Seamless Red Brass Pipe, Standard Sizes	56.60-1
ASTM B 43–96, Standard Specification for Seamless Red Brass Pipe, Standard Sizes	56.01-2 56.60-1
ASTM B 68–83 Seamless Copper Tube, Bright Annealed	56.60-1
ASTM B 68–95, Standard Specification for Seamless Copper Tube, Bright Annealed	56.01-2 56.60-1

Compressed Gas Association

1725 Jefferson Davis Highway, Suite 1004, Arlington, VA 22202

Publication	CFR Reference
S–1.2 Safety Relief Device Standards—Cargo and Portable Tanks for Compressed Gases, 1979	54.15-25
S–1.2.5.2 Flow Test of Safety Relief Valves, 1979	54.15-10

Expansion Joint Manufacturers Association, Inc.

25 North Broadway, Tarrytown, NY 10591

Publication	CFR Reference
Standards of the Expansion Joint Manufacturers Association, 1980 edition with 1985 addenda	56.60-1

Fluid Controls Institute, Inc.

Plaza 222, U.S. Highway One, Tequesta, FL 33458

Publication	CFR Reference
69–1 Pressure Rating Standard for Steam Traps, 1977	56.60-1

International Maritime Organization (formerly Inter–Governmental Maritime Organization)

4 Albert Embankment, London SE1 7SR, England Telephone: 0171–587 3210; FAX: 0171–587 3210; Telex: 23588. Purchase from: IMO Sales, New York Nautical Instrument and Service Corp., 140 W. Broadway, New York, NY 10013. Telephone: (212) 962–4522; FAX: (212) 406–8420

Publication	CFR Reference
A.467(XII), Guidelines for Acceptance of Non–Duplicated Rudder Actuators for Tankers, Chemical Tankers and Gas Carriers of 10,000 Tons Gross Tonnage and Above But Less Than 100,000 Tonnes Deadweight, 1981	58.25-60
A.468(XII), Code on Noise Levels on Board Ships, 1981	58.01-50
Resolution A.753 (XVIII) Guidelines for the Application of Plastic Pipes on Ships, November 4, 1993	56.01-2 56.60-25
Resolution MEPC.59 (33) Revised Guidelines for the Implementation of Annex V of MARPOL 73/78, October 30, 1992	63.05-1 63.25-9

International Organization for Standardization

Case Postale 56, CH–1211, Geneve 20, Switzerland

Publication	CFR Reference
13617 Shipbuilding–Shipboard Incinerators–Requirements (First Edition, 1995)	63.05-1 63.25-9

Manufacturers Standardization Society

127 Park Street NE., Vienna, VA 22180

Publication	CFR Reference
SP–6–85 Standard Finishes for Contact Faces of Pipe Flanges and Connecting–End Flanges of Valves and Fittings	56.25-10 56.60-1
SP–9–87 Spot–facing for Bronze, Iron and Steel Flanges	56.60-1
SP–25 Standard Marking System for Valves, Fittings, Flanges and Unions, 1978	54.01-25
SP–25–88 Standard Marking System for Valves, Fittings, Flanges and Unions	56.15-1 56.20-5 56.60-1
SP–42 Class 150—Corrosion Resistant Gate Globe, Angle and check valves with Flanged and Butt–Welded Ends, 1978	56.60-1
SP–44–85 Steel Pipe Line Flanges	56.60-1
SP–45–87 By–pass and Drain Connection Standard	56.20-20 56.60-1
SP–51–86 Class 150LW Corrosion Resistant Cast Flanges and Fittings, 1978	56.60-1
SP–55–85 Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and other Piping Components—Magnetic Particle Examination Method	56.60-1
SP–58–83 Pipe Hangers and Supports—Materials, Design and Manufacture	56.60-1
SP–61–85 Pressure Testing of Steel Valves	56.60-1
SP–67–83 Butterfly Valves	56.60-1
SP–69–83 Pipe Hangers and Supports—Selection and Application	56.60-1
SP–72–87 Ball Valves with Flanged or Butt–Welding Ends for General Service	56.60-1
SP–73–86 Brazing Joints for Wrought and Cast Copper Alloy Solder Joint Pressure Fittings	56.60-1
SP–83–87 Steel Pipe Unions, Socket–Welding and Threaded	56.60-1

Department of Defense

DODSSP Standardization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 17111–5098

Publication	CFR Reference
MIL–S–901 Shock Tests, HI, (high impact); shipboard machinery equipment and systems requirements for, 1963	58.30-17

National Fire Protection Association

11 Tracy Drive, Avon, MA 02322 Telephone: (800) 344–3555

Publication	CFR Reference
70 National Electrical Code, 1981	63.05-85 63.10-85
302–89 Fire Protection Standard for Motor Craft, Pleasure and Commercial	58.10

Society of Automotive Engineers

400 Commonwealth Dr., Warrendale, PA 15096–0001, Telephone: (412) 776–4841

Publication	CFR Reference
J343–80 Tests and Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies	56.60-25
J429 Mechanical and Quality Requirements for Externally Threaded Fasteners, 1980k	58.30-15
J1928–89, Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications	58.10
J1942–89, Hose and Hose Assemblies for Marine Applications	56.60
J1475–84 Hydraulic Hose Fittings for Marine Applications	56.60-25

Tubular Exchanger Manufacturers Association

707 Westchester Ave., White Plains, NY 10604

Publication	CFR Reference
Heat Exchangers, Class “B,” “C,” or “R”, 1978	54.01-3

Underwriters Laboratories, Inc.

Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179

Publication	CFR Reference
UL 174 Standard for Household Electric Storage Tank Water Heaters, Seventh Edition, April 18, 1983 (Revisions through March 1988)	63.25-3
UL 296 Standard for Oil Burners, Seventh Edition, August 22, 1980 (Revisions through August 1985)	63.15-5
UL 343 Standard for Pumps for Oil–Burning Appliances, Sixth Edition, July 14, 1986	63.15-3
UL 506–79 Specialty Transformers	63.05-55 63.10-65
UL 814–78 Gas Tube Sign and Ignition Cable	63.05-55 63.10-55
UL 1102–80 Non–Integral Marine Fuel, Tanks	58.50-15
UL 1111–88 Marine Carburetor Flame Arresters	58.10
UL 1453, Standard for Electric Booster and Commercial Storage Tank Water Heaters, Third Edition, February 5, 1988	63.25-3

U.S. Department of Commerce

National Technical Information Service, 5285 Port Royal Rd., Springfield, VA 22181, Telephone: (703) 487–4650, FAX: (703) 487–4142

Publication	CFR Reference
Federal Information Processing Standards Publication 55DC, Guideline: Codes For Named Populated Places, Primary County Divisions, And Other Locational Entities of the United States and Outlying Areas (1987)	67.13 67.119