American Boat and Yacht Council

3069 Solomon's Island Road, Edgewater, MD 21037

Publication	CFR Reference
P–1–73—Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines, 1973	169.115 169.609 169.703
H–24.9 (g) and (h)—Fuel Strainers and Fuel Filters, 1975	169.115 169.629
H–2.5—Ventilation of Boats Using Gasoline—Design and Construction, 1981	169.115 169.629
A–1–78—Marine LPG—Liquefied Petroleum Gas Systems, 1978	169.115 169.703
A–3–70—Recommended Practices and Standards Covering Galley Stoves, 1970	169.115 169.703
A–22–78—Marine CHG—Compressed Natural Gas Systems, 1978	169.115 169.703
A–1–78 Marine LPG–Liquefied Petroleum Gas Systems, December 15, 1978	184.05-1
A–1–93—Marine Liquefied Petroleum Gas (LPG) Systems	184.240
A–3–93—Galley Stoves	184.200
A–7–70—Boat Heating Systems	184.200
A–16–89—Electric Navigation Lights	183.130
A–22–78 Marine CNG–Compressed Natural Gas Systems, December 15, 1978	184.05-1
A–22–93—Marine Compressed Natural Gas (CNG) Systems	184.240
E–8–94—Alternating Current (AC) Electrical Systems on Boats	183.130
E–9–90—Direct Current (DC) Electrical Systems on Boats	183.130
H–2–89—Ventilation of Boats Using Gasoline	182.130 182.460
H–22–86—DC Electric Bilge Pumps Operating Under 50 Volts	182.130 182.500
H–24–93—Gasoline Fuel Systems	182.130 182.440 182.445 182.450 182.455
H–25–94—Portable Gasoline Fuel Systems	182.130 182.458
H–32–87—Ventilation of Boats Using Diesel Fuel	182.130 182.465 182.470
H–33–89—Diesel Fuel Sysems	182.130 182.440 182.445 182.450 182.455
P–1—Safe Installation of Exhaust Systems for Propulsion and Auxiliary Machinery, 1973	182.15-15 182.15-20
P–1–93—Installation of Exhaust Systems for Propulsion and Auxiliary Engines	177.405 177.410 182.130 182.425 182.430
P–4–89—Marine Inboard Engines	182.130 182.420

American Bureau of Shipping

Publications Department, 16855 Northchase Drive, Houston, Texas 77060

Publication	CFR Reference
Rules for Building and Classing Steel Vessels, 1981	167.15-27 167.20-1
Guide for Building and Classing High–Speed Craft, February, 1997	175.600 177.300
Rules for Building and Classing Aluminum Vessels, 1975	177.300
Rules for Building and Classing Reinforced Plastic Vessels, 1978	177.300
Rules for Building and Classing Steel Vessels, 1995	182.410 183.360
Rules for Building and Classing Steel Vessels Under 61 Meters (200 Feet) in Length, 1983	177.300
Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways, 1995	177.300
Rules for Building and Classing Steel Vessels, 1981	188.35-1 189.15-1 190.01-10 190.01-15 195.01-5

American National Standards Institute (ANSI)

25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900

Publication	CFR Reference
A 17.1–1984, including supplements A17.1a–1985 and A17.1b–1985—Safety Code for Elevators and Escalators	183.540
B 31.1–1986—Code for Pressure Piping, Power Piping	182.710
Z 26.1–1977, including 1980 supplement—Safety Glazing Materials For Glazing Motor Vehicles Operating on Land Highways	177.1030
ANSI B31.1–80 Power Piping	197.204 197.205 197.336
ANSI/ASME PVHO 1 Safety Standard for Pressure Vessels for Human Occupancy, 1981	197.204 197.205 197.300 197.328
ANSI Z 88.2–80 Practices for Respiratory Protection	197.550

American Society of Mechanical Engineers

Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME

Publication	CFR Reference
Boiler and Pressure Vessel Code, Section VIII, 1980	197.204 197.205 197.300 197.310 197.328
ASME/ANSI B31.3 Process Piping, 1996, including 1996 Addenda	Appendix A to part 193

American Society for Testing and Materials

100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555

Publication	CFR Reference
ASTM A 53–96 Standard Specification for Pipe, Steel, Black and Hot–Dipped, Zinc–Coated Welded and Seamless	Appendix A to part 192 195.3
ASTM A 106–95 Standard Specification for Seamless Carbon Steel Pipe for High–Temperature Service	Appendix A to part 192 195.3
ASTM B 96–93, Standard Specification for Copper–Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels	175.600 182.440
ASTM B 97–77 Copper–Silicon Alloy Plate, Sheet, Strip and Rolled Bar for General Purposes	182.15-25
ASTM B 117–73 (Reapproved 1979)—Method of Salt Spray (Fog) Testing	175.400
ASTM B 117–97, Standard Practice for Operating Salt Spray (Fog) Apparatus	175.400 175.600
ASTM B 122–79 Copper–Nickel Zinc Alloy (Nickel Silver) and Copper–Nickel Alloy Plate, Strip, and Rolled Bar	182.15-25
ASTM B 122/B 122 M–95, Standard Specification for Copper–Nickel–Tin Alloy, Copper–Nickel–Zinc Alloy (Nickel Silver), and Copper–Nickel Alloy Plate, Sheet, Strip, and Rolled Bar	175.600 182.440
ASTM B 127–80a Nickel–Copper Alloy (UNS NO4400) Plate, Sheet and Strip	182.15-25 182.20-25
ASTM B 127–98, Standard Specification for Nickel–Copper Alloy (UNS NO4400) Plate, Sheet, and Strip	175.600 182.440
ASTM B 152–79 Copper, Sheet, Strip, Plate and Rolled Bar	182.15-25
ASTM B 152–97a, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar	175.600 182.440
ASTM B 209–81 Aluminum Alloy Sheet and Plate	182.15-25 182.20-25
ASTM B 209–96, Standard Specification for Aluminum and Aluminum–Alloy Sheet and Plate	175.600 182.440
ASTM D 93–80 Test for Flash Point by Pennsky–Martens Closed Tester	182.15-1 182.20-1
ASTM D 93–94, Flash Point by Pensky–Martens Closed Cup Tester	175.400 199.05 199.261 199.290
ASTM D 93–97, Standard Test Methods for Flash Point by Pensky–Martens Closed Cup Tester	175.400 175.600 199.05 199.261 199.290
ASTM D 323–79 Test for Vapor Pressure of Petroleum Products (Reid Method)	188.10-21
ASTM D 635–91 Rate of Burning and/or Extent and Time of Burning of Self–Supporting Plastics in a Horizontal Position	182.440
ASTM D 635–97, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position	175.600 182.440
ASTM D 638–96 Standard Test Method for Tensile Properties of Plastics	Appendix A to part 192
ASTM D 2513–96a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings	Appendix A to part 192
ASTM D 2863–95, Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle–like Combustion of Plastics (Oxygen Index)	175.600 182.440
ASTM D 2863–91 Measuring the Minimum Oxygen Concentration to Support Candle–like Combustion of Plastics (Oxygen Index)	182.440
ASTM E 84–94 Surface Burning Characteristics of Building Materials	177.410
ASTM E 84–98, Standard Test Method for Surface Burning Characteristics of Building Materials	175.600 177.410
ASTM F 1003, Standard Specification for Searchlights on Motor Lifeboats, 1986 (Reapproved 1992)	199.05 199.175
ASTM F 1003–86 (1992), Standard Specification for Searchlights on Motor Lifeboats	199.05 199.175
ASTM F 1014–86 Standard Specification for Flashlights on Vessels	192.20-15(j) 195.35-5(c)(2) 199.05 199.175
ASTM F 1014–92, Standard Specification for Flashlights on Vessels	195.01-3 195.35-5 199.05 199.175
ASTM F 1121–87 (1993), Standard Specification for International Shore Connections for Marine Fire Applications	193.01-3 193.10-10
ASTM F 1121–87 International Shore Connections for Marine Fire Applications	193.10
ASTM F 1196–89, Sliding Watertight Door Assemblies	170.270 174.100 190.01
ASTM F 1196–94, Standard Specification for Sliding Watertight Door Assemblies	170.015 170.270 174.007 174.100
ASTM F 1197–89 (1994), Standard Specification for Sliding Watertight Door Control Systems	170.015 170.270 174.007 174.100
ASTM F 1197–89 Sliding Watertight Door Control Systems	190.01
ASTM F 1546–94 Standard Specification for Fire Hose Nozzles	167.027-3

Coast Guard

Commandant [G–MVI], 2100 2nd St. SW., Washington, DC 20593

Publication	CFR Reference
160.014 “Compass and Mounting dated Dec. 14, 1944” (Specification for Compasses: Magnetic, Liquid–filled, Mariners, Compensating, for Lifeboats (with mounting) for Merchant Vessels),1944	192.20-15

Department of Defense

DODSSP Standarization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 19111–5098

Publication	CFR Reference
ZZ–H–451 Hose, Fire, Woven–Jacketed Rubber or Cambric–lined, with Couplings, F	167.45-5 169.115 169.563 181.15-10 193.10-10
NAVSEA Cable Comparison Guide, 1975	183.10-20
BB–N–411 Nitrogen, Technical, C	197.340
BB–O–925 Oxygen, Technical, Gas and Liquid, A	197.340
MIL–P–21929B; Plastic Material, Cellular Polyurethane, Foam in Place, Rigid (1970)	170.245
MIL–R–21607E (SH); Resins, Polyester, Low Pressure Laminating, Fire–Retardant, May 25, 1990	175.600 177.410
MIL–P–21929B (1970)—Plastic Material, Cellular Polyurethane, Foam–in–Place, Rigid (2 and 4 pounds per cubic foot)	179.240
MIL–P–21929C; Plastic Material, Cellular Polyurethane, Foam in Place, Rigid (1991) (including Amendment 1, dated May 27, 1994)	175.600 179.240

Institute of Electrical and Electronic Engineers (formerly American Institute of Electrical Engineers)

Service Center, 445 Hoes Lane, Piscataway, NJ 08855 Telephone: (800) 678–4333

Publication	CFR Reference
45—Recommended Practice for Electrical Installations on Shipboard, 1977	167.25-1 167.40-1 183.01-15 183.05-45 183.10-10 183.340

International Maritime Organization

4 Albert Embankment, London SE1 7SR, England Telephone: 0171–587 3210; FAX: 0171–587 3210; Telex: 23588. Purchase from: IMO Sales, New York Nautical Instrument and Service Corp., 140 W. Broadway, New York, NY 10013. Telephone: (212) 962–4522; FAX: (212) 406–8420

Publication	CFR Reference
IMO “International Maritime Dangerous Goods (IMDG) Code, 1994 Consolidated Edition, as amended by Amendment 28 (1996) (English edition)”	171.12 172.401 172.407
Resolution A.264(VIII) Amendment to Chapter VI of the International Convention for the Safety of Life at Sea, 1960, November 20, 1973	172.015 172.020
Resolution A.265 (VIII)	170.135, 171.075, 171.082
Resolution MSC.23 (59) Publication No. 240–E, International Code for the Safe Carriage of Grain in Bulk, 1991	172.015 172.020
Resolution A.520(13), Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life–Saving Appliances and Arrangements, dated November 17, 1983	175.540
Resolution A.649(16), Code for the Construction and Equipment of Mobile Offshore Drilling Units (MODU Code), October 19, 1989 with Amendments of June, 1991	181.108 181.503
Resolution A.658(16), Use and Fitting of Retro–Reflective Materials on Life–Saving Appliances, dated November 20, 1989	185.604
Resolution A.688(17), Fire Test Procedures For Ignitability of Bedding Components, dated November 6, 1991	177.405
Resolution A.760(18), Symbols Related to Life–Saving Appliances and Arrangements, dated November 17, 1993	185.604(g)
MSC Circular 699, Revised Guidelines for Passenger Safety Instructions, 17 July, 1995	199.05 199.217
Resolution A.520(13), Code of Practice for the Evaluation, Testing, and Acceptance of Prototype Novel Life–Saving Appliances and Arrangements, 19 November, 1983	199.05 199.40
Resolution A.657(16), Instructions for Action in Survival Craft, 19 October, 1989	199.05 199.175
Resolution A.658(16), Use and Fitting of Retro–reflective Materials on Life–Saving Appliances, 20 November, 1989	199.05 199.70 199.176
Resolution A.760(18), Symbols Related to Life–Saving Appliances and Arrangements, 17 November, 1993	199.05 199.70 199.90
Resolution MSC.4(48), International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (IBC Code), 1994	199.05 199.30 199.280
Resolution MSC.5(48), International Code for the Construction and Equipment of Ships Carrying Liquified Gases in Bulk (ICG Code), 1993	199.05 199.30 199.280

Lloyd's Register of Shipping

17 Battery Place, Suite 1013, New York, NY 10004

Publication	CFR Reference
Rules and Regulations for the Classification of Yachts and Small Craft, as amended through 1983	177.300

Manufacturers Standardization Society of the Valve and Fittings Industry, Inc.

127 Park Street NW., Vienna, VA 22180

Publication	CFR Reference
MSS SP44–96 Steel Pipe Line Flanges	Appendix A to part 192

National Fire Protection Association

1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555

Publication	CFR Reference
70—National Electrical Code, 1980	169.115 169.672
302—Pleasure and Commercial Motor Craft Chapter 6, 1980	169.115 169.703
306—Control of Gas Hazards on Vessels, 1980	167.30-1 169.115 169.236
NFPA 10–1994—Portable Fire Extinguishers	176.810
NFPA 17–1994—Dry Chemical Extinguishing Systems	181.425
NFPA 17A–1994—Wet Chemical Extinguishing Systems	181.425
NFPA 70—National Electrical Code, 1980	183.01-10 183.05-45 183.05-50 183.10-20
NFPA 70–1993—National Electrical Code (NEC)	183.370
Section 250–95	183.370
Section 310–13	183.340
Section Section 310–15	183.340
Article 430	183.320
Article 445	183.320
NFPA 302—Pleasure and Commercial Motor Craft, 1989	184.05-1
NFPA 302–1994—Pleasure and Commercial Motor Craft, Chapter 6	184.200 184.200
NFPA 306–1993—Control of Gas Hazards on Vessels	176.710
NFPA 1963–1989—Fire Hose Connections	181.320
NFPA 30 Flammable and Combustible Liquids Code, 1996	Appendixes A to part 192 and 193
NFPA306—Control of Gas Hazards on Vessels (Formerly “Control of Gas Hazards on Vessels to be Repaired”), 1975	189.50-1

National Institute of Standards and Technology (formerly National Bureau of Standards)

c/o Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, Telephone 202–512–1800

Publication	CFR Reference
Special Pub. 440 (SD Cat. No. C13, 10.490) Color: Universal Language and Dictionary of Names, 1976	169.115

Society of Automotive Engineers (SAE)

400 Commonwealth Dr., Warrendale, PA 15096–0001, Telephone: (412) 776–4841

Publication	CFR Reference
SAE J–1475—Hydraulic Hose Fittings For Marine Applications, 1984	182.720
SAE J–1928—Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications, August 1989	182.415
SAE J–1942—Hose and Hose Assemblies for Marine Applications, 1992	182.720

Underwriters Laboratories, Inc.

Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179

Publication	CFR Reference
UL 19–78 Woven–jacketed Rubber Lined Fire Hose	167.45-5 169.115 169.563
UL 19–78 Woven–Jacketed, Rubber Lined Fire Hose	181.15-10
UL 19–1992—Lined Fire Hose and Hose Assemblies	181.320
UL 174–1989, as amended through June 23, 1994—Household Electric Storage Tank Water Heaters	182.320
UL 197–78 (Revisions through 1979) Commercial Electric Cooking Appliances	183.01-15 183.10-45
UL 217–1993—Single and Multiple Station Smoke Detectors	181.450
UL 486A–1992—Wire Connectors and Soldering Lugs For Use With Copper Conductors	183.340
UL 489–1995—Molded—Case Circuit Breakers and Circuit Breaker Enclosures	183.380
UL 595–74 (Revisions through 1980) Marine Type Electric Lighting Fixtures	183.01-15
UL 595–1991—Marine Type Electric Lighting Fixtures	183.410
UL 710–1990, as amended through Sept. 16, 1993—Exhaust Hoods for Commercial Cooking Equipment	181.425
UL 1058–1989, as amended through April 19, 1994—Halogenated Agent Extinguishing System Units	181.410
UL 1102–80 Non Integral Marine Fuel Tanks	182.15-25
UL 1102–1992—Non integral Marine Fuel Tanks	182.440
UL 1110–1988, as amended through May 16, 1994—Marine Combustible Gas Indicators	182.480
UL 1111–1988—Marine Carburetor Flame Arresters	182.415
UL 1453–1988, as amended through June 7, 1994—Electric Booster and Commercial Storage Tank Water Heaters	182.320
UL 1570–1995—Fluorescent Lighting Fixtures	183.410
UL 1571–1995—Incandescent Lighting Fixtures	183.410
UL 1572–1995—High Intensity Discharge Lighting Fixtures	183.410
UL 1573–1995—Stage and Studio Discharge Lighting Units	183.410
UL 1574–1995—Track Lighting Systems	183.410(c)
UL 19–71 Woven Jacketed, Rubber Lined Fire Hose	193.10-10