Site Feedback

Website Feedback

This contact form is only for website help or website suggestions. If you have questions or comments regarding a published document please contact the publishing agency. Comments or questions about document content can not be answered by OFR staff. Please do not provide confidential information or personal data.

Incorporation by Reference

Title 40 — Protection of Environment
Material Approved for Incorporation by Reference

40 CFR (Part 60, Appendices) - Environmental Protection Agency

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .

Incorporation by Reference

Reader Aids help people use and understand the eCFR. Reader Aids information is not published in the Code of Federal Regulations.

American Public Health Association, American Water Works Association, and Water Pollution Control Federation

1015 Fifteenth Street NW., Washington, DC 20005; Telephone: (202) 777–APHA

Publication CFR Reference
Standard Methods for the Examination of Water and Wastewater, 16th ed. (1985), Method 308 F
Appendix A to Part 60, Method 29, pars. 4.2.2, 4.4.2, and 4.5.6

American Society for Testing and Materials

100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX (610): 832–9555

Publication CFR Reference
ASTM D129–64, 78, 95, Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
Appendix A to Part 60, Method 19, Section 12.5.2.2.3
ASTM D240–76, 92 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
Appendix A to Part 60, Method 19, Section 12.5.2.2.3
ASTM D270–65 (Reapproved 1975), Standard Method of Sampling Petroleum and Petroleum Products
Appendix A to Part 60, Method 19
ASTM D1193–77, 91, Standard Specification for Reagent Water
Appendix A to Part 60, Method 5, Section 7.1.3
Method 5E, Section 7.2.1, Method 5F, Method 7.2.1
Method 6, Section 7.1.1
Method 7, Section 7.1.1
Method 7C, Section 7.1.1
Method 7D, Section 7.1.1
Method 10A, Section 7.1.1
Method 11, Section 7.1.3
Method 12, Section 7.1.3
Method 13A, Section 7.1.2
Method 26, Section 7.1.2
Method 26A, Section 7.1.2
Method 29, Section 7.2.2
Appendix B of Part 61
Method 101, Section 7.1.1
Method 101A, Section 7.1.1
Method 104, Section 7.1
Method 108, Section 7.1.3
Method 108A, Section 7.1.1
Method 108B, Section 7.1.1
Method 108C, Section 7.1.1
Method 111, Section 7.3
Appendix A of Part 63
Method 306, Sections 7.1.1 and 7.4.2.
ASTM D1475–60, 80, 90, Standard Test Method for Density of Paint, Varnish Lacquer, and Related Products
Appendix A to Part 60, Method 24, Section 6.1, and Method 24A, Sections 6.5 and 7.1
ASTM D1552–83, Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
Appendix A to Part 60, Method 19, Section 12.5.2.2.3
ASTM D1608–77, Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)
Method 7, par. 3.2.2
ASTM D1826–77, Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
Appendix A: Method 19, Section 12.3.2.4
ASTM D2013–72, 86, Standard Method of Preparing Coal Samples for Analysis
Appendix A to Part 60
Method 19, Section 12.5.2.1.3
ASTM D2015–77, (Reapproved 1978), 96, Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter
Appendix A to Part 60, Method 19, Section 12.5.2.1.3
ASTM D2016–74 (Reapproved 1983), Standard Text Methods for Moisture Content of Wood
Appendix A to Part 60, Method 28
ASTM D2234–76, 96, 97a, 97b, 98, Standard Methods for Collection of a Gross Sample of Coal
Appendix A to Part 60, Method 19, Section 12.5.2.1.1
ASTM D2369–81, 87, 90, 92, 93, 95, Standard Test Method for Volatile Content of Coatings
Appendix A to Part 60, Method 24, Section 6.2
ASTM D2986–71 (Reapproved 1978), 95a, Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
Appendix A to Part 60, Method 5, Section 7.1.1
Method 12, Section 7.1.1
Method 13A, Section 7.1.1.2
ASTM D 2986–95A, Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
Appendix A to Part 60, Method 315, par. 7.1.1
ASTM D3173–73, 87, Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
Appendix A to Part 60, Method 19, Section 12.5.2.1.3
ASTM D3176–74, 89, Standard Method for Ultimate Analysis of Coal and Coke
Appendix A to Part 60, Method 19, 12.3.2.3
ASTM D3177–75, 89, Standard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke
Appendix A to Part 60, Method 19, section 12.5.2.1.3
ASTM D3286–85, 96, Standard Test Method for Gross Calorific Value of Coal and Coke by the Isothermal-Jacket Bomb calorimeter
Appendix A to Part 60, Method 19, Section 12.5.2.1.3
ASTM D3431–80, Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons (Microcoulometric Method)
Appendix A to Part 60, Method 19
ASTM D3792–79, 91, Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection Into a Gas Chromatograph
Appendix A to Part 60, Method 24, Section 6.3
ASTM D4017–81, 90, 96a, Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method
Appendix A to Part 60, Method 24, Section 6.4
ASTM D4057–81, Standard Practive for Manual Sampling of Petroleum and Petroleum Products
Appendix A to Part 60, Method 19
ASTM D4239–85, 94, 97, Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
Appendix A to Part 60, Method 19, Section 12.5.2.1.3
ASTM D4442–84, 92, Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood–base Materials
Appendix A to Part 60, Method 28, Section 16.1.1
ASTM D4457–85, (Reapproved 1991), Test Method for Determination of Dichloromethane and 1,1,1–Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
Appendix A to Part 60, Method 24, Section 6.5
ASTM D 6216–98, Standard Practice for Opacity Monitor Manufacturers To Certify Conformance with Design and Performance Specifications
Appendix B to Part 60, Specification 1, Section 8.2

U.S. Environmental Protection Agency

401 M Street, SW., Washington, DC 20460

Publication CFR Reference
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, EPA Publication SW–846 Third Edition (November, 1986), as amended by Updates I (July 1992), II (September 1994), IIA (August 1993) and IIB (January 1995)
Appendix A to Part 60, Method 29, pars. 2.2.1, 2.3.1, 2.5, 3.3.12.1, 3.3.12.2, 3.3.13, 3.3.14, 5.4.3, 6.2, 6.3, 7.2.1, 7.2.3, and Table 29–2
Incorporation by Reference