The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .
25 West 43rd Street, Fourth floor, New York, NY 10036
| Publication | CFR Reference |
|---|---|
|
ANSI B109.1–1992, Diaphragm Type Gas Displacement Meters
|
92.117
|
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
| Publication | CFR Reference |
|---|---|
|
ASTM D 86–93 Standard Test Method for Distillation of Petroleum Products
|
90.7
Part 90, Appendix A to Subpart D, Table 3 91.6 Part 91, Appendix A to Subpart D |
|
ASTM D 86–95, Standard Test Method for Distillation of Petroleum Products
|
92.113
|
|
ASTM D 86–97, Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
89.6
Part 86, Appendix A to Subpart D |
|
ASTM D 86–01, Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
94.5
94.108 |
|
ASTM D 93–94, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
|
92.113
|
|
ASTM D 93–97, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
|
89.6
Part 89, Appendix A to Subpart D |
|
ASTM D 93–02, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
|
94.5
94.108 |
|
ASTM D 129–95, Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
|
89.6
Part 89, Appendix A to Subpart D |
|
ASTM D 129–00, Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
|
94.5
94.108 |
|
ASTM D 287–92, Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
|
89.6
Part 89, Appendix A to Subpart D 92.113 |
|
ASTM D 287–92 (Reapproved 2000), Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
|
94.5
94.108 |
|
ASTM D 323–90, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
|
91.6
Part 91, Appendix A to Subpart D |
|
ASTM D 445–94, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
|
92.113
|
|
ASTM D445–97, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
|
89.6
Part 89, Appendix A to Subpart D |
|
ASTM D445–01, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
|
94.5
94.108 |
|
ASTM D 613–95, Standard Test Method for Cetane Number of Diesel Fuel Oil
|
89.6
Part 89, Appendix A to Subpart D 92.113 |
|
ASTM D 613–01, Standard Test Method for Cetane Number of Diesel Fuel Oil
|
94.5
94.108 |
|
ASTM D 976–91, Standard Test Method for Calculated Cetane Index of Distillate Fuels
|
92.113
|
|
ASTM D 1319–89, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
|
90.7, Part 90, Appendix A to Subpart D
|
|
ASTM D 1319–93, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
|
91.6
Part 91, Appendix A to Subpart D |
|
ASTM D 1319–95, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
|
92.113
|
|
ASTM D 1319–98, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
|
89.6
Part 89, Appendix A to Subpart D |
|
ASTM D 1319–02a, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
|
94.5
94.108 |
|
ASTM D 1945–91, Standard Test Method for Analysis of Natural Gas by Gas Chromatography
|
92.113
|
|
ASTM D 2622–92, Standard Test Method for Sulfur in Petroleum Products by X-ray Spectrometry
|
89.6
Appendix A to Subpart D, Table 3 90.7 Part 90, Appendix A to Subpart D, Table 3 91.6 Part 91, Appendix A to Subpart D |
|
ASTM D 2622–94, Standard Test Method for Sulfur in Petroleum Products by X–ray Spectrometry
|
92.113
|
|
ASTM D2622–98, Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
|
89.6
Part 89, Appendix A to Subpart D 94.5 94.108 |
|
ASTM D 2699–92, Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method
|
90.7
Part 90, Appendix A to Subpart D, Table 3 91.6 Part 91, Appendix A to Subpart D |
|
ASTM D 2700–92, Standard Test Method for Knock Characteristics of Motor and Aviation Fuels by the Motor Method
|
90.7
Part 90, Appendix A to Subpart D, Table 3 91.6 Part 91, Appendix A to Subpart D |
|
ASTM D 3231–89, Standard Test Method for Phosphorus in Gasoline
|
90.7
Part 90, Appendix A to Subpart D, Table 3 91.6 Part 91, Appendix A to Subpart D |
|
ASTM D 3606–92, Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
|
90.7
Part 90, Appendix A to Subpart D, Table 3 91.6 Part 91, Appendix A to Subpart D |
|
ASTM D 5186–91, Standard Test Method for Determination of Aromatic Content of Diesel Fuels by Supercritical Fluid Chromatography
|
92.113
|
|
ASTM D 5186–96, Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
|
89.6
Part 89, Appendix A to Subpart D |
|
ASTM D 5186–99, Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
|
94.5
94.108 |
|
ASTM D 5191–93a, Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
|
90.7
Part 90, Appendix A to Subpart D, Table 3 |
|
ASTM E29–90, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
89.6
89.207–96 89.509–96 |
|
ASTM E 29–93a, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
89.6
Part 89, Appendix A to Subpart D 90.7 90.116 90.509 91.6 Part 91, Appendix A to Subpart D 91.120 91.207 91.509 91.1307 92.9, 92.305, 92.509, 94.9 94.218 94.305 94.508 |
|
ASTM E 29–02, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
94.2
94.5 |
California Air Resources Board, Haagen-Smit Laboratory, 9528 Telstar Avenue, El Monte, CA 91731–2990
| Publication | CFR Reference |
|---|---|
|
California Air Resources Board Resolution 92–2, California Regulations for New 1996 and Later Heavy-Duty Off-Road Diesel Cycle Engines
|
89.6
89.112-96 89.119-96 89.508-96 |
OAR, 401 M St. SW., Washington, DC 20460
| Publication | CFR Reference |
|---|---|
|
California Regulatory Requirements Applicable to the Clean Fuel Fleet and California Pilot Programs, April 1, 1990
|
88.104-94
|
Document Sales Unit, 999 University Street, Montreal, Quebec, Canada H3C 5H7
| Publication | CFR Reference |
|---|---|
|
ICAO Annex 16, Volume II, Aircraft Engine Emissions, Second Edition 1993, including Amendment 3 of March 20, 1997
|
87.8
87.64 87.71 87.82 87.89 |
|
ICAO Annex 16, Volume II, Aircraft Engine Emissions (Second Ed. 1993), Appendix 2
|
87.82
|
|
ICAO Annex 16, Volume II, Aircraft Engine Emissions (Second Ed. 1993), Appendixes 3 and 5
|
87.64
|
|
ICAO Annex 16, Volume II, Aircraft Engine Emissions (Second Ed. 1993), Appendix 6
|
87.71
87.89 |
4 Albert Embankment, London SE1 7SR, United Kingdom
| Publication | CFR Reference |
|---|---|
|
Annex VI of MARPOL 73/78, Revision 2: Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines, 1997
|
94.2
94.5 94.11 94.108 94.109 94.204 94.211 94.1004 |
Case Postale 56, CH–1211 Geneva 20, Switzerland
| Publication | CFR Reference |
|---|---|
|
ISO 8178-1: Reciprocating Internal Combustion Engines—Exhaust Emission Measurement—Part 1: Test-bed Measurement of Gaseous and Particulate Exhaust Emissions, August 15, 1996
|
94.5
94.109 |
400 Commonwealth Dr. Warrendale, PA 15096–0001; Telephone: (724) 776–4841
| Publication | CFR Reference |
|---|---|
|
SAE J244, June 83, Recommended Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines
|
89.6
89.416-96 92.108 |
|
SAE J1228/ISO 8665, Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations, November 1991
|
91.6
91.104 91.115 91.118 91.207 91.1307 |
|
SAE J1930, September 1991, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
|
90.7
90.114 91.113 |
|
SAE J1930, June 1993, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
|
91.6
91.113 |
|
SAE J1937, November 89, Recommended Practice for Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell
|
89.6
89.327-96 |
|
SAE Paper 770141, Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts, Glenn D. Reschke, 1977
|
89.6
89.319-96 90.7 90.316 91.6 91.316 92.119 |