The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .
Copies available from: EPA TSCA Document Processing Center, Rm. G–004 Northeast Mall, 401 M Street, SW., Washington, DC 20460
| Publication | CFR Reference |
|---|---|
|
Environmental Science and Technology, Vol. 14, No. 11, Prediction of the Volatilization Rates of High-Volatility Chemicals from Natural Water Bodies, Smith, et al.
|
799.1285(e)(2)(i)
|
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959
| Publication | CFR Reference |
|---|---|
|
ASTM D 86–04b, Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
1065.703
1065.710 1065.1010 |
|
ASTM D 93–02a, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
|
1065.703
1065.1010 |
|
ASTM D 287–92 (Reapproved 2000), Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
|
1065.703
1065.1010 |
|
ASTM D 323–99a, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
|
1065.710
1065.1010 |
|
ASTM D 445–04, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
|
1065.703
1065.1010 |
|
ASTM D 471–98, Standard Test Method for Rubber Property—Effect of Liquids, 1998
|
1051.501
1051.810 |
|
ASTM D 613–03b, Standard Test Method for Cetane Number of Diesel Fuel Oil
|
1065.703
1065.1010 |
|
ASTM D 814–95 (Reapproved 2000), Standard Test Method for Rubber Property—Vapor Transmission of Volatile Liquids, 2000
|
1051.810
|
|
ASTM D 910–04a, Standard Specification for Aviation Gasolines
|
1065.701
1065.1010 |
|
ASTM D 975–04c, Standard Specification for Diesel Fuel Oils
|
1065.701
1065.1010 |
|
ASTM D 976–91 (Reapproved 2000), Standard Test Methods for Calculated Cetane Index of Distillate Fuels
|
1065.205
1065.1010 |
|
ASTM D 1193–77 (Reapproved 1983) Standard Specification for Reagent Water
|
796.3500(b)(1)(ii)
|
|
ASTM D 1266–98 (Reapproved 2003), Standard Test Method for Sulfur in Petroleum Products (Lamp Method), 1998
|
1065.710
1065.1010 |
|
ASTM D 1267–02, Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method), 2002
|
1065.720
1065.1010 |
|
ASTM D 1319–03, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption, 2002
|
1065.710
1065.1010 |
|
ASTM D 1655–04a, Standard Specification for Aviation Turbine Fuels
|
1065.701
1065.1010 |
|
ASTM D 1836–83 Standard Specification for Commercial Hexanes
|
795.232(c)(2)(i)
799.2155(a)(1) |
|
ASTM D 1837-02a, Standard Test Method for Volatility of Liquefied Petroleum (LP)Gases, 2002
|
1065.720
1065.1010 |
|
ASTM D 1838–03, Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases, 2001
|
1065.720
1065.1010 |
|
ASTM D 1945–03, Standard Test Method for Analysis of Natural Gas by Gas Chromatography
|
1065.715
1065.1010 |
|
ASTM D 2158–04, Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
|
1065.720
1065.1010 |
|
ASTM D 2163–91 (Reapproved 1996), Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography, 1996
|
1065.720
1065.1010 |
|
ASTM D 2598–02, Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis, 2002
|
1065.720
1065.1010 |
|
ASTM D 2622–03, Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
|
1065.703
1065.1010 |
|
ASTM D 2713–91 (Reapproved 2001), Standard Test Method for Dryness of Propane (Valve Freeze Method), 2001
|
1065.720
1065.1010 |
|
ASTM D 2784–98, Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp), 1998
|
1065.720
1065.1010 |
|
ASTM D 2879–86 Standard Test Method for Vapor Pressure—Temperature Relationship and Initial Decomposition Temperature of Liquids by Isotoniscope
|
796.1950(b)(2)(i)
|
|
ASTM D 2880–03 Standard Specification for Gas Turbine Fuel Oils
|
1065.720
1065.1010 |
|
ASTM D 2986–95a (Reapproved 1999), Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
1065.170
1065.1010 |
|
ASTM D 3231–02, Standard Test Method for Phosphorous in Gasoline, 2002
|
1065.710
1065.1010 |
|
ASTM D 3237–02, Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
|
1065.710
1065.1010 |
|
ASTM D 4814–04b, Standard Specification for Automotive Spark-Ignition Engine Fuel
|
1065.701
1065.1010 |
|
ASTM D 5186–03, Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
|
1065.703
1065.1010 |
|
ASTM D 5797–96 (Reapproved 2001), Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
|
1065.701
1065.1010 |
|
ASTM D 5798–99 (Reapproved 2004), Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
|
1065.701
1065.1010 |
|
ASTM D 6615–04a, Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
|
1065.701
1065.1010 |
|
ASTM D 6751–03a, Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
|
1065.701
1065.1010 |
|
ASTM D 6985–04a, Standard Specification for Middle Distillate Fuel Oil—Military Marine Applications
|
1065.701
1065.1010 |
|
ASTM E 29–02, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications, 2002
|
1048.801
1048.810 1051.801 1051.810 |
|
ASTM E 324–99, Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
|
799.5085
|
|
ASTM E 729–96 (Reapproved 2002), Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
|
799.5085
|
|
ASTM E 1147–92 (Reapproved 1997), Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography
|
799.5085
|
|
ASTM E 1148–02, Standard Test Method for Measurements of Aqueous Solubility
|
799.5085
|
|
ASTM E 1163–98 (Reapproved 2002), Standard Test Method for Estimating Acute Oral Toxicity in Rats
|
799.5085
|
|
ASTM E 1193–97 (Reapproved 2004), Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests
|
799.5085
|
|
ASTM E 1218–04, Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
799.5085
|
|
ASTM E 1625–94 (Reapproved 2001), Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)
|
799.5085
|
|
ASTM E 1719–97, Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
|
799.5085
|
|
ASTM E 1782–03, Standard Test Method for Determining Vapor Pressure by Thermal Analysis
|
799.5085
|
|
ASTM F 1471–93 (Reapproved 2001), Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air Filter System
|
1065.1001
1065.1010 |
9528 Telstar Avenue, El Monte, California 91731
| Publication | CFR Reference |
|---|---|
|
California Non-Methane Organic Gas Test Procedures, July 30, 2002
|
1065.805
1065.1010 |
Rm. G–004 Northeast Mall, 401 M Street, SW., Washington, DC 20460
| Publication | CFR Reference |
|---|---|
|
ASTM STP 854, “Aquatic Safety Assessment of Chemicals Sorbed to Sediments”, by W.J. Adams et al, as published in Aquatic Toxicology and Hazard Assessment: Seventh Symposium.
|
799.500(c)(4)(i)(B)
799.4000(d)(3)(i) 799.4360(d)(7)(i)(B) |
|
ASTM STP 854, “Phoxoccephalid Amphipod Bioassay for Marine Sediment Toxicity”, by R.C. Swartz, et al, as published in Aquatic Toxicology and Hazard Assessment: Seventh Symposium.
|
799.500(c)(4)(i)(A)
|
Case Postale 56, CH–1211 Geneve 20, Switzerland
| Publication | CFR Reference |
|---|---|
|
ISO 8178-1, Reciprocating Internal Combustion Engines—Exhaust Emission Measurement—Part 1: Test-bed Measurement of Gaseous and Particulate Exhaust Emissions, August 15, 1996
|
1065.130
1065.135 1065.140 1065.155 1065.1010 |
|
ISO 9141–2: Road Vehicles—Diagnostic Systems—Part 2: CARB Requirements for Interchange of Digital Information, February 1, 1994
|
1048.110
1048.810 1806-04 1806-05 |
|
ISO 9888: Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium—Static Test (Zahn-Wellens Method), Second edition, 1999
|
799.5085
|
|
ISO 14230–4: Road Vehicles—Diagnostic Systems—Keyword Protocol 2000—Part 4: Requirements for Emission-related Systems, June 1, 2000
|
1048.110
1048.810 1806-04 1806-05 |
|
ISO 14644–1: Clean Rooms and Associated Controlled Environments, 2001
|
1065.190
1065.1010 |
Government Printing Office, Washington, DC, or download from the Internet at: http://physics.nist.gov/Pubs/SP811
| Publication | CFR Reference |
|---|---|
|
NIST Special Publication 811: Guide for the Use of the International System of Units (SI), 1995
|
1039.801
1039.810 1065.20 1065.1001 1065.1005 1065.1010 |
|
NIST Technical Note 1297: Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results
|
1065.1001
1065.1010 |
OECD Publication and Information Center, Room Number 1207, 1750 Pennsylvania Avenue, NW. Washington, DC
| Publication | CFR Reference |
|---|---|
|
“Teratogenicity”, Number 414, adopted May 12, 1981
|
799.1650(c)
|
400 Commonwealth Dr., Warrendale, PA 15096–0001; Telephone: (412) 776–4841
| Publication | CFR Reference |
|---|---|
|
SAE Paper No. 770141, Optimization of Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts, 2001
|
1065.360
1065.1010 |
|
SAE 2001-01-3536, Relationships Between Instantaneous and Measured Emissions in Heavy Duty Applications, 2001
|
1065.309
1065.1010 |
|
SAE J30, Fuel and Oil Hoses, June 1998
|
1051.245
1051.501 1051.810 |
|
SAE J1930: Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms, May 1998
|
1039.135
1039.810 1048.135 1048.810 1051.135 1051.810 1808-01 1808-07 |
|
SAE J2260: Nonmetallic Fuel System Tubing with One or More Layers, November 1996
|
1048.105
1048.810 1051.245 1051.810 |
POB 12538, Arlington, VA 22209–8534
| Publication | CFR Reference |
|---|---|
|
Developments in Industrial Microbiology, Vol. 18, Chapter 11, 1977; An Artificial Microbiol Ecosystem for Determining Effects and Rate of Toxicants in a Salt-March Environment, A.W. Bouquin et al., copies available from: EPA TSCA Document Processing Center, Rm. G–004 Northeast Mall, 401 M Street, SW., Washington, DC 20460
|
799.4000(c)(1)(i)
799.1285 (e)(1)(i) 799.500 (d)(2)(i)(B) |