The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .
1515 Wilson Blvd., Arlington, VA 22209
| Publication | CFR Reference |
|---|---|
|
AGA Report No. 3: Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 1, General Equations and Uncertainty Guidelines (October 1990 edition); Part 2, Specification and Installation Requirements (February 1991 edition); and Part 3, Natural Gas Applications (August 1992 edition)
|
75.20
Appendices D and E of Part 75 |
|
AGA Report No. 7: Measurement of Gas by Turbine Meters (1985 edition)
|
75.20
|
|
AGA Report No. 7: Measurement of Gas by Turbine Meters (2nd revision, 1996 edition)
|
75.6, Appendix D of part 75
|
1211 Avenue of the Americas, New York, NY 10036
| Publication | CFR Reference |
|---|---|
|
Codification of Statements on Auditing Standards, “Statements on Standards for Attestation Engagements, 1991, Identification Number 059021
|
80.125
|
1220 L Street NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
| Publication | CFR Reference |
|---|---|
|
API Manual of Petroleum Management Standard (MPMS), Chapter 3, section 1A, Standard Practice for the Manual Gauging of Petroleum and Petroleum Products, First Edition, December 1994
|
75.19
|
|
API Manual of Petroleum Measurement Standards, Chapter 3, Section 1A, Standard Practice for the Manual Gauging of Petroleum and Petroleum Products, August 2005, Second Edition
|
75.6
|
|
API Manual of Petroleum Management Standard (MPMS), Chapter 3, section 1B, Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging, First Edition, April 1992, Reaffirmed January 1997
|
75.19
|
|
API Manual of Petroleum Measurement Standards, Chapter 3, Section 1B, Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging, June 2001, Second Edition
|
75.6
|
|
API Manual of Petroleum Management Standard (MPMS), Chapter 3, section 2, Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars, First Edition, September 1995
|
75.6
75.19 |
|
API Manual of Petroleum Management Standard (MPMS), Chapter 3, section 3, Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Pressurized Storage Tanks by Automatic Tank Gauging, First Edition, June 1996
|
75.6
75.19 |
|
API Manual of Petroleum Management Standard (MPMS), Chapter 3, section 4, Standard Practice for Level Measurement of Liquid Hydrocarbons on Marine Vessels by Automatic Tank Gauging, First Edition, April 1995
|
75.6
75.19 |
|
API Manual of Petroleum Management Standard (MPMS), Chapter 3, section 5, Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging, First Edition, March 1997
|
75.19
|
|
API Manual of Petroleum Measurement Standards, Chapter 3, Section 5, Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging, March 1997 (reaffirmed, March 2003), First Edition
|
75.6
|
|
API Manual of Petroleum Measurement Standards, Chapter 4, Section 2, Pipe Provers (Provers Accumulating at Least 10,000 Pulses), March 2001, Second Edition
|
75.6
|
|
API Manual of Petroleum Measurement Standards, Chapter 4, Section 5, Master-Meter Provers, May 2000, Second Edition
|
75.6
|
|
API Manual of Petroleum Measurement Standards, Chapter 22, Section 2, Differential Pressure Flow Measurement Devices, August 2005, First Edition
|
75.6
|
|
API Bulletin 2509B, Shop Testing of Automatic Liquid Level Gauges, December 1961; reaffirmed August 1987 and October 1992
|
75.6
75.19 |
Three Park Avenue, New York, NY 10016–5990; Order inquiries: 22 Law Drive, P.O. Box 2900, Fairfield, New Jersey 07007; Phone: 1–800–843–2763
| Publication | CFR Reference |
|---|---|
|
ASME MFC–3M–1989 with September 1990 Errata Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
75.20 and Appendix D of Part 75
|
|
ASME MFC–3M–2004 (Revision of ASME MFC–3M–1989 (R1995)), Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi, 2004
|
75.6
|
|
ASME MFC–4M–1986 (Reaffirmed 1990) Measurement of Gas Flow by Turbine Meters
|
75.20 and Appendix D of Part 75
|
|
ASME MFC–4M–1986 (reaffirmed 1997), Measurement of Gas Flow by Turbine Meters, 1997
|
75.6
|
|
ASME MFC–5M–1985 Measurement of Liquid Flow in Closed Conduits Using Transit–Time Ultrasonic Flowmeters
|
75.20 and Appendix D of Part 75
|
|
ASME MFC–5M–1985 (reaffirmed 1994), Measurement of Liquid Flow in Closed Conduits Using Transit–Time Ultrasonic Flowmeters, 1994
|
75.6
|
|
ASME MFC–6M–1987 with June 1987 Errata Measurement of Fluid Flow in Pipes Using Vortex Flow Meters
|
75.20 and Appendix D of Part 75
|
|
ASME MFC–6M–1998, Measurement of Fluid Flow in Pipes Using Vortex Flowmeters, 1998
|
75.6
|
|
ASME MFC–7M–1987 (Reaffirmed 1992) Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
|
75.20 and Appendix D of Part 75
|
|
ASME MFC–7M–1987 (reaffirmed 1992), Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles, 1992
|
75.6
|
|
ASME MFC–9M–1988 with December 1989 Errata Measurement of Liquid Flow in Closed Conduits by Weighing Method
|
75.20 and Appendix D of Part 75
|
|
ASME MFC–9M–1988 (reaffirmed 2001), Measurement of Liquid Flow in Closed Conduits by Weighing Method, 2001
|
75.6
|
|
ASME Performance Test Code 4.2 (1991), Test Code for Coal Pulverizers
|
76.4
76.15 |
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
| Publication | CFR Reference |
|---|---|
|
ASTM D 86–01, Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
80.46
80.84 |
|
ASTM D 86–90, Standard Test Method for Distillation of Petroleum Products
|
80.46
|
|
ASTM D 129–91 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
|
Appendices A and D of Part 75 and 72.7
|
|
ASTM D 129–00, Standard Test Method for Sulfur in Petroleum Products (General Bomb Method), 2000
|
75.6
|
|
ASTM D 240–87 (Reapproved 1991) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
|
Appendices A, D, and F of Part 75
|
|
ASTM D 240–00, Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter, 2000
|
75.6
|
|
ASTM D 287–82 (Reapproved 1987) Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
|
Appendix D of Part 75
|
|
ASTM D 287–92 (Reapproved 2000), Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method), 2000
|
75.6
|
|
ASTM D 388–92 Standard Classification of Coals by Rank
|
72.2 and Appendix F of Part 75
|
|
ASTM D 388–99, Standard Classification of Coals by Rank, 1999
|
75.6
|
|
ASTM D 396–90a Standard Specification for Fuel Oils
|
72.2
|
|
ASTM D 439–81, Standard Specifications for Automotive Gasoline
|
80.2(d)
80.22(b) |
|
ASTM D 941–88 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Lipkin Bicapillary Pycnometer
|
Appendix D of Part 75
|
|
ASTM D 975–91 Standard Specification for Diesel Fuel Oils
|
72.2
|
|
ASTM D 975–93, Standard Specification for Diesel Fuel Oils
|
79.56(d)(5) and (e)(3)
|
|
ASTM D 975–04, Standard Specification for Diesel Fuel Oils
|
80.2
|
|
ASTM D 976–80 Standard Methods for Calculated Cetane Index of Distillate Fuels
|
80.2(w)
|
|
ASTM D 1072–90 Standard Test Method for Total Sulfur in Fuel Gases
|
Appendix D of Part 75 and 72.7
|
|
ASTM D 1072–06, Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration, 2006
|
75.6
|
|
ASTM D 1217–91 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
|
Appendix D of Part 75
|
|
ASTM D 1217–93 (Reapproved 1998), Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham, Pycnometer, 1998
|
75.6
|
|
ASTM D 1250–80 (Reapproved 1990) Standard Guide for Petroleum Measurement Tables
|
Appendix D of Part 75
|
|
ASTM D 1250–07, Standard Guide for Use of Petroleum Measurement Tables, 2007
|
75.6
|
|
ASTM D 1265–92 Standard Practice for Sampling Liquified Petroleum (LP) Gases (Manual Method)
|
72.7
|
|
ASTM D 1298–85 (Reapproved 1990) Standard Practice for Density, Relative Density (Specific Gravity) or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
|
Appendix D of Part 75
|
|
ASTM D 1298–99, Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method, 1999
|
75.6
|
|
ASTM D 1319–03, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
|
80.2(z)
80.46 |
|
ASTM D 1319B–03, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
|
80.46
|
|
ASTM D1480–91 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
|
Appendix D of Part 75
|
|
ASTM D 1480–93 (Reapproved 1997), Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer, 1997
|
75.6
|
|
ASTM D 1481–91 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
|
Appendix D of Part 75
|
|
ASTM D 1481–93 (Reapproved 1997), Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer, 1997
|
75.6
|
|
ASTM D 1552–90 Standard Test Method for Sulfur in Petroleum Products (High Temperature Method)
|
Appendices A and D of Part 75
|
|
ASTM D 1552–01, Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method), 2001
|
75.6
|
|
ASTM D 1826–88 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
|
Appendix F of Part 75
|
|
ASTM D 1826–94 (Reapproved 1998), Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter, 1998
|
75.6
|
|
ASTM D 1945–91 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
|
Appendices F and G of Part 75
|
|
ASTM D 1945–96 (Reapproved 2001), Standard Test Method for Analysis of Natural Gas by Gas Chromatography, 2001
|
75.6
|
|
ASTM D 1946–90 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
|
Appendices F and G of Part 75
|
|
ASTM D 1946–90 (Reapproved 2006), Standard Practice for Analysis of Reformed Gas by Gas Chromatography, 2006
|
75.6
|
|
ASTM D 1989–92 Standard Test Method for Gross Caloric Value of Coal and Coke by Microprocessor Controlled Isoperibol Calorimeters
|
Appendix F of Part 75
|
|
ASTM D 2013–86 Standard Method of Preparing Coal Samples for Analysis
|
Appendix F of Part 75
75.15 |
|
ASTM D 2013–01, Standard Practice for Preparing Coal Samples for Analysisl 2001
|
75.6
|
|
ASTM D 2015–91 Standard Test Method for Gross Calorific Value of Coal and Coke by the Adiabatic Bomb Calorimeter
|
Appendices A, D, and F of Part 75
75.15 |
|
ASTM D 2234–89 Standard Test Methods for Collection of a Gross Sample of Coal
|
Appendix F of Part 75
75.15 |
|
ASTM D 2234–00, Standard Practice for Collection of a Gross Sample of Coal, 2000
|
75.6
|
|
ASTM D 2382–88 Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
|
Appendices D, and F of Part 75
|
|
ASTM D 2502–87 Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils from Viscosity Measurements
|
Appendix G of Part 75
|
|
ASTM D 2502–92 (Reapproved 1996), Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils from Viscosity Measurements, 1996
|
75.6
|
|
ASTM D 2503–82 (Reapproved 1987) Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
|
Appendix G of Part 75
|
|
ASTM D 2503–92 (Reapproved 1997), Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure, 1997
|
75.6
|
|
ASTM D 2622–92 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
|
72.7
Appendices A and D of Part 75 80.46 |
|
ASTM D 2622–98, Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry, 1998
|
75.6
|
|
ASTM D 2622–03 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
|
80.46
80.580 |
|
ASTM D 2880–90a, Standard Specification for Gas Turine Fuel Oils
|
72.2
|
|
ASTM D2892–84, Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
|
Appendix E to Part 80
|
|
ASTM D 3120–03a, Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
|
80.46
80.580 |
|
ASTM D 3172–89, Standard Practice for Proximate Analysis of Coal and Coke
|
76.4
76.15 |
|
ASTM D3174–89 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
|
Appendix G of Part 75
|
|
ASTM D 3174–00, Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal, 2000
|
75.6
|
|
ASTM D 3176–89 Standard Practice for Ultimate Analysis of Coal and Coke
|
Appendices A and F of Part 75
76.4 76.15 |
|
ASTM D 3176–89 (Reapproved 2002), Standard Practice for Ultimate Analysis of Coal and Coke,2002
|
75.6
|
|
ASTM D 3177–89 Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke
|
Appendix A of Part 75
75.15 |
|
ASTM D 3177–02 (Reapproved 2007), Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke, 2007
|
75.6
|
|
ASTM D 3178–89 Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
|
Appendix G of Part 75
|
|
ASTM D 3178–89 (Reapproved 2002), Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke, 2002
|
75.6
|
|
ASTM D 3238–90 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d–a
M Method |
Appendix G of Part 75
|
|
ASTM D 3238–95 (Reapproved 2000), Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by n–d–M Method, 2000
|
75.6
|
|
ASTM D 3246–96 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
|
80.46
|
|
ASTM D 3246–96, Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry, 1996
|
75.6
|
|
ASTM D 3286–91a Standard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter
|
Appendix F of Part 75
|
|
ASTM D 3588–91 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels
|
Appendix F of Part 75
|
|
ASTM D 3588–98, Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels, 1998
|
75.6
|
|
ASTM D 3606–92, Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
|
80.46
|
|
ASTM D 3606–99, Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
|
80.46
|
|
ASTM D 4052–91 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
|
Appendix D of Part 75
|
|
ASTM D 4052–96 (Reapproved 2002), Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter, 2002
|
75.6
|
|
ASTM D 4057–88 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
Appendix D of Part 75 and 72.7
|
|
ASTM D 4057–95 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
80.330
|
|
ASTM D 4057–95 (Reapproved 2000), Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
75.6, 80.8
|
|
ASTM D 4177–82 (Reapproved 1990) Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
|
Appendix D of Part 75
|
|
ASTM D 4177–95 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
|
80.330
|
|
ASTM D 4177–95 (Reapproved 2000), Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
|
75.6, 80.8
|
|
ASTM D 4239–85 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
|
Appendix A of Part 75
75.15 |
|
ASTM D 4239–02, Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High–Temperature Tube Furnace Combustion Methods, 2002
|
75.6
|
|
ASTM D 4294–83 Standard Test Method for Sulfur in Petroleum Products by Non–dispersive X–ray Fluorescence Spectrometry
|
80.30(g)(2)(ii)
|
|
ASTM D 4294–90 Standard Test Method for Sulfur in Petroleum Products by Energy–Dispersive X–Ray Fluorescence Spectroscopy
|
72.7 and Appendices A and D of Part 75
|
|
ASTM D 4294–98, Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy–Dispersive X–ray Fluorescence Spectrometry, 1998
|
75.6
|
|
ASTM D 4294–03 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy–Dispersive X–Ray Fluorescence Spectrometry
|
80.580
|
|
ASTM D 4468–85 (Reapproved 1989) Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry
|
Appendix D of Part 75
|
|
ASTM D 4468–85 (Reapproved 2000) Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry
|
80.46
|
|
ASTM D 4468–85 (Reapproved 2006), Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric, 2006
|
75.6
|
|
ASTM D 4809–00, Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method), 2000
|
75.6
|
|
ASTM D 4814–93a, Standard Specification for Automotive Spark-Ignition Engine Fuel
|
79.56(d)(5) and (e)(3)
|
|
ASTM D 4814–95c, Standard Specification for Automotive Spark-Ignition Engine Fuel
|
80.164(a)(5)
|
|
ASTM D 4815–93, Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
|
80.46
|
|
ASTM D 4815–99, Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary–Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
|
80.46
|
|
ASTM D 4815–03, Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary–Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
|
80.46
|
|
ASTM D 4840-99 (Reapproved 2004), Standard Guide for Sample Chain-of-Custody Procedures
|
75.6
Part 75, Appendix K, section 7.2.9 |
|
ASTM D 4891–89 Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion
|
Appendix F of Part 75
|
|
ASTM D 5191–01, Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
|
80.46
|
|
ASTM D 4891–89 (Reapproved 2006, Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion, 2006
|
75.6
|
|
ASTM D 5291–92 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
Appendix G of Part 75
|
|
ASTM D 5291–02, Standard Test Methods for Instrumental Determination of Carbon and Hydrogen, and Nitrogen in Petroleum Products and Lubricants, 2002
|
75.6
|
|
ASTM D 5373–02 (Reapproved 2007), Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke, 2007
|
75.6
|
|
ASTM D 5453–03a, Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
|
80.46
80.580 |
|
ASTM D 5453–06, Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence, 2006
|
75.6
|
|
ASTM D 5500–94, Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark–Ignition Fuel for Intake Valve Deposit Formation
|
80.165(b)
|
|
ASTM D 5504–94, Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
|
Appendix D of Part 75
|
|
ASTM D 5598–94, Standard Specification for Evaluating Unleaded Automotive Spark–Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
|
80.165(a)
|
|
ASTM D 5504–01, Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence, 2001
|
75.6
|
|
ASTM D 5599–00, Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
|
80.46
|
|
ASTM D 5769–98, Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography (Mass Spectrometry)
|
80.46
|
|
ASTM D 5842–95, Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
|
80.330
|
|
ASTM D 5842–95 (Reapproved 2000), Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
|
80.8
|
|
ASTM D 5854–96 (Reapproved 2000), Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
|
80.8
|
|
ASTM D5865–01a, Standard Test Method for Gross Calorific Value of Coal and Coke, 2001
|
75.6
|
|
ASTM D 6299–02, Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
|
80.582, 80.585
|
|
ASTM D 6428–99, Standard Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and their Derivatives by Oxidative Combustion and Electrochemical Detection
|
80.46
80.580 |
|
ASTM D 6667–01, Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
|
80.46
|
|
ASTM D 6667–04, Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquified Petroleum Gases by Ultraviolet Fluorescence, 2004
|
75.6
|
|
ASTM D 6751–07, Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels, 2007
|
80.1101
|
|
ASTM D 6784–02, Standard Test Method for Elemental, Oxidized, Particle–bound and Total Mercury in Flue Gas Generated from Coal–fired Stationary Sources (Ontario–Hydro Method)
|
75.6
75.22 |
|
ASTM D 6911–03, Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
|
75.6
Part 75, Appendix K, section 7.2.8 |
|
ASTM D 6920–03, Standard Test Method for Total Sulfur in Naphthas, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
|
80.46
80.580 |
|
ASTM D 7036–04, Standard Practice for Competence of Air Emission Testing Bodies, 2004
|
75.6
|
|
ASTM D 7039–04, Standard Test Method for Total Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
|
80.46
|
|
ASTM E1–86, Standard Specification for ASTM Thermometers
|
Appendix E of Part 80
|
|
ASTM E 29–02, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
80.9
|
2020 L St., P.O. Box 285, Sacramento, CA 95814
| Publication | CFR Reference |
|---|---|
|
BMW–10,000 Miles Intake Valve Test Procedure, March 1, 1991
|
80.165(c)
|
|
Test Method for Evaluating Port Fuel Injector (PFI) Deposits in Vehicle Engines, March 1, 1991
|
80.165(c)
|
6526 East 60th Street, Tulsa, OK 74145
| Publication | CFR Reference |
|---|---|
|
GPA Standard 2172–86, Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis
|
Appendices D, E, and F of Part 75
|
|
GPA Standard 2172-96, Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis, 1996
|
75.6
|
|
GPA Standard 2261–90, Analysis for Natural Gas and Similar Gaseous Mixtures by Gas Chromatography
|
Appendices D, F, and G of Part 75
|
|
GPA Standard 2261–00, Analysis for Natural Gas and Similar Gaseous Mixtures by Gas Chromatography, 2000
|
75.6
|
249 Maitland Avenue, Altamonte Springs, FL 32701–4201
| Publication | CFR Reference |
|---|---|
|
Codification of Standards for the Professional Practice of Internal Auditing, 1989, Identification Number ISBN 0–89413–207–5
|
80.125
|
Case Postale 56, CH–1211 Geneve 20, Switzerland
| Publication | CFR Reference |
|---|---|
|
ISO 8316: 1987(E), Measurement of Liquid Flow in Closed Conduits—Method of Collection of the Liquid in a Volumetric Tank
|
75.20
Appendices D and E of Part 75 |
|
ISO 9931 (December 1991), Coal—Sampling of Pulverized Coal Conveyed by Gases in Direct Fired Coal Systems
|
76.4
76.15 |
Washington, DC 20402–9371; Telephone: (202) 512–1800; Telefacsimile: (202) 275–0019
| Publication | CFR Reference |
|---|---|
|
U.S. Department of Health and Human Services, Guide for the Care and Use of Laboratory Animals, 1985
|
79.61(c)(3), (d)(2), and (d)(4)
|