Site Feedback

Incorporation by Reference

Title 40 — Protection of Environment
Material Approved for Incorporation by Reference

40 CFR (700-789) - Environmental Protection Agency

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .

Incorporation by Reference

Reader Aids help people use and understand the eCFR. Reader Aids information is not published in the Code of Federal Regulations.

American Society for Testing and Materials

100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555

Publication CFR Reference
ASTM D 93–90 Standard Test Method for Flash Point by Pensky-Martens Closed Tester
761.19(b)
761.60(a)(3) (iii)(B)(6)
761.75(b)(8)(iii)
ASTM D 129–64 (R 78) Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
761.19(b)
761.60(a)(3) (iii)(B)(6)
ASTM D 240—87 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter
761.19(b)
761.60(a)(3) (iii)(B)(6)
ASTM D 482–87 Standard Test Method for Ash from Petroleum Products
761.19(b)
761.60(a)(3) (iii)(B)(6)
ASTM D 524–88 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
761.19(b)
761.60(a)(3) (iii)(B)(6)
ASTM D 808–87 Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)
761.60(a)(3)(iii) (B)(6)
ASTM D 923–86 Standard Test Method for Sampling Electrical Insulating Liquids
761.19(b)
761.60(g)(1)(ii) and (2)(ii)
ASTM D 923–89 Standard Methods of Sampling Electrical Insulating Liquids
761.19(b)
761.60(g)(1)(ii) and (2)(ii)
ASTM D 1266–87 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
761.19(b)
761.60(a)(3) (iii)(B)(6)
ASTM D 1796–83 (Reapproved 1990) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
761.19(b)
761.60(a)(3) (iii)(B)(6)
ASTM D 2158–89 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
761.19(b)
761.60(a)(3) (iii)(B)(6)
ASTM D 2709–88 Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge
761.19(b)
761.60(a)(3) (iii)(B)(6)
ASTM D 2784–89 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
761.19(b)
761.60(a)(3) (iii)(B)(6)
ASTM D 3178–84 Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coke and Coal
761.19(b)
761.60(a)(3) (iii)(B)(6)
ASTM D 3278–89 Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus
761.75(b)(8)(iii)
ASTM E 258–67 (R 87) Standard Test Method for Total Nitrogen Inorganic Material by Modified KJELDAHL Method
761.19(b)
761.60(a)(3) (iii)(B)(6)

National Institute for Occupational Safety and Health (NIOSH)

4676 Columbia Parkway, Cincinnati, Ohio 45226

Publication CFR Reference
NIOSH Manual of Analytical Methods, 3rd Edition, Second Supplement, 1987 Method 7400, “Fibers”
763.90(i)(5), (i)(6), and (i)(7)