Site Feedback

Incorporation by Reference

Title 40 — Protection of Environment
Material Approved for Incorporation by Reference

40 CFR (63.8980-End) - Environmental Protection Agency

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .

Incorporation by Reference

Reader Aids help people use and understand the eCFR. Reader Aids information is not published in the Code of Federal Regulations.

American Society of Mechanical Engineers

3 Park Avenue, New York, NY 10016–5990; Order inquiries: ASME International, Orders/Inquiries, P.O. Box 2900, Fairfield, New Jersey 07007; Phone: 1-800-843-2763 Also available from Global Engineering Documents, Sales Department, 15 Inverness Way East, Englewood, CO 80112

Publication CFR Reference
ANSI/ASME PTC 19.10–1981, Flue and Exhaust Gas Analyses, Part 10: Instruments and Apparatus
63.9307(c)(2)
63.9323(a)(3)
63.11148(e)(3)(iii)
63.11155(e)(3)
63.11162(f)
63.11163(g)
Subpart DDDDD, Table 5

American Society for Testing and Materials

100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555

Publication CFR Reference
ASTM D 1193–77, Standard Specification for Reagent Water
Par. 4.1.1 and Par. 4.4.2 of Appendix A to Part 63
Method 306, Section 7.1.1 and 7.4.2 of Appendix A to Part 63
ASTM D 1331–89, Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface Active Agents
Par. 3.1 and Par. 4.2 of Appendix A to Part 63
ASTM D 5291-02, Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
Appendix A (to subpart MMMM of Part 63)
ASTM D 6053-00, Standard Test Method for Determination of Volatile Organic Compounds (VOC) Content of Electrical Insulating Varnishes
Appendix A to Subpart MMMM of Part 63)
ASTM D 6522-00, Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers, 2000
63.9307
Subpart ZZZZ, Table 4
Subpart DDDDD, Table 5
ASTM D 6784-02, Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario-Hydro Method)
Subpart DDDDD, Table 5