The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .
1330 Kemper Meadow Drive, Cincinnati, Ohio 45240–1634
| Publication | CFR Reference |
|---|---|
|
Industrial Ventilation: A Manual of Recommended Practice
|
63.1502
|
|
Industrial Ventilation: A Manual of Recommended Practice, 23rd Edition, 1998, Chapters 3 and Chapter 5
|
63.1506(c)
63.2984(e) 63.3003 |
1220 L Street, NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
| Publication | CFR Reference |
|---|---|
|
API Publication 2517, Evaporative Loss from External Floating-Roof Tanks, 3rd Ed., February 1989
|
63.2406
|
3 Park Avenue, New York, NY 10016–5990; Order inquiries: ASME International, Orders/Inquiries, P.O. Box 2900, Fairfield, New Jersey 07007; Phone: 1-800-843-2763 Also available from Global Engineering Documents, Sales Department, 15 Inverness Way East, Englewood, CO 80112
| Publication | CFR Reference |
|---|---|
|
ANSI/ASME PTC 19.10–1981, Flue and Exhaust Gas Analyses, Part 10: Instruments and Apparatus
|
63.3166(a)(3)
63.3360(e)(1)(iii) 63.3545(a)(3) 63.3555(a)(3) 63.4166(a)(3) 63.4362(a)(3) 63.4766(a)(3) 63.4965(a)(3) 63.5160(d)(1)(iii) |
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
| Publication | CFR Reference |
|---|---|
|
ASTM D 1475–98 (Reapproved 2003), Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
|
63.3941(b)(4), 63.3941(c), 63.3951(c), 63.4141(b)(3), 63.4141(c), 63.4551(c), 63.3151(b)
|
|
ASTM D 2099-00, Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
|
63.5350
|
|
ASTM D 2697–86 (Reapproved 1998), Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
|
63.3161(f)(1), 63.3521(b)(1), 63.3941(b)(1), 63.4141(b)(1)
63.4741(b)(1) 63.4941(b)(1) 63.5160(c) |
|
ASTM D 2879–83, Standard Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
63.2406
|
|
ASTM D 2879–96, Standard Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
63.2406
|
|
ASTM D 5066-91 (Reapproved 2001), Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis
|
63.3161(g)
|
|
ASTM D 5087-02, Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solvent-borne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
|
63.3165(e), 63.3176 Appendix A
|
|
ASTM D 5291-02, Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
63.3981
|
|
ASTM D 5965-02, Standard Test Methods for Specific Gravity of Coating Powders
|
63.3151(b), 63.3951(c)
|
|
ASTM D 6053-00, Standard Test Method for Determination of Volatile Organic Compounds (VOC) Content of Electrical Insulating Varnishes
|
63.3981
|
|
ASTM D 6093–97 (Reapproved 2003), Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
|
63.3161(f)(1)
63.3521(b)(1) 63.3941(b)(1) 63.4141(b)(1) 63.4741(b)(1) 63.4941(b)(1) 63.5160(c) |
|
ASTM D 6266-00a, Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released from Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
|
63.3165(e)
|
|
ASTM D 6348-03, Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
63 Subpart DDDD, Appendix B
63 Subpart DDDD, Table 4 |
|
ASTM D 6420-99 (Reapproved 2004), Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
63.2351
63.2354 |
|
ASTM E 145–94 (Reapproved 2001), Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
|
63.4581 Appendix A
|
P.O. Box 13318, Research Triangle Park, North Carolina 27709-3318
| Publication | CFR Reference |
|---|---|
|
Method CI/WP-98.01, Chilled Impinger Method for Use at Wood Products Mills to Measure Formaldehyde, Methanol, and Phenol, August 1998
|
63 Subpart DDDD, Table 4
|
|
Method IM/CAN/WP-99.02, Impinger/Canister Source Sampling Method for Selected HAPS and Other Compounds at Wood Products Facilities, January 2004
|
63 Subpart DDDD, Table 4
63 Subpart DDDD, Appendix B |
|
NCASI Method ISS/FP-A105.01, Impinger Source Sampling Method for Selected Aldehydes, Ketones, and Polar Compounds, December 2005
|
63 Subpart DDDD, Table 4
63 Subpart DDDD, Appendix B |
5285 Port Royal Road, Springfield, VA
| Publication | CFR Reference |
|---|---|
|
Interim Procedures for Estimating Risks Associated with Exposures to Mixtures of Chlorinated Dibenzo–p–Dioxins and –Dibenzofurans (CDDs and CDFs) and 1989 Update, EPA/625/3–89/016, March 1989 (NTIS No. PB 90–145756)
|
63.1513(d)
|