The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .
P.O. Box 92683, Chicago, IL 60675–2683
| Publication | CFR Reference |
|---|---|
|
“An Ounce of Prevention: Waste Reduction Strategies for Health Care Facilities,” American Society for Health Care Environmental Services of the American Hospital Association, 1993. AHA Catalog No. 057007. ISBN 0–87258–673–5
|
60.17
|
25 West 43rd Street, Fourth floor, New York, NY 10036; Telephone: (212) 642–4900
| Publication | CFR Reference |
|---|---|
|
ANSI/ASME PTC 19.10–1981, Flue and Exhaust Gas Analyses: Part 10, Instruments and Apparatus
|
60.17
Part 60, Subpart EEEE, Tables 1 and 3 Subpart FFFF, Tables 2 and 4 |
1220 L Street, NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
| Publication | CFR Reference |
|---|---|
|
API Publication 2517, Evaporative Loss from External Floating-Roof Tanks, Second Edition, February 1980
|
60.17
60.111(1) 60.111a(g) 60.111b(g) 60.116b(f)(2)(ii) |
1015 Fifteenth Street NW., Washington, DC 20005; Telephone: (202) 777–APHA
| Publication | CFR Reference |
|---|---|
|
Standard Methods for the Examination of Waste and Wastewater, 15th ed. (1980) Method 209A, Total Residue Dried at 103° to 105° C
|
60.17(e)(1)
60.683(b) |
|
Standard Methods for the Examination of Water and Wastewater, 16th ed. (1985), Method 308 F
|
60.17(a)(22)
|
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX (610): 832–9555
| Publication | CFR Reference |
|---|---|
|
ASTM A99–76, 82, (Reapproved 1987), Standard Specification for Ferromanganese
|
60.17
60.261 |
|
ASTM A100–69, 74, 93, Standard Specification for Ferrosilicon
|
60.17
60.261 |
|
ASTM A101–73, 93, Standard Specification for Ferrochromium
|
60.17, 60.261
|
|
ASTM A482–76, 93, Standard Specification for Ferrochrome-silicon
|
60.17, 60.261
|
|
ASTM A483–64, 74, 88, Standard Specification for Silicomanganese
|
60.17, 60.261
|
|
ASTM A495–76, 94, Standard Specification for Calcium-Silicon and Calcium Manganese-Silicon
|
60.17, 60.261
|
|
ASTM D86–78, 82, 90, 93, 95, 96, Distillation of Petroleum Products
|
60.17(a)
60.562-2(d), 60.593(d) 60.633(h) |
|
ASTM D129–64, 78, 95, Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
|
60.17(a)(56)
60.106(j)(2) |
|
ASTM D 129-00 (Reapproved 2005) Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
|
60.17, 60.4415(a)(1)(ii)
|
|
ASTM D240–76, 92 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
|
60.17, 60.46(c)
60.296(b) |
|
ASTM D323–82 94, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
|
60.17(a)(13)
60.111(l) 60.111a(g) 60.111b(g) 60.116b(f)(2)(ii) |
|
ASTM D388–77, 90, 91, 95, 98a, 99, Standard Classification of Coals by Rank
|
60.17(a)
60.24(h) 60.41(f) 60.41a 60.251 (b), (c) 60.4102 |
|
ASTM D388 (Reapproved 2004), Standard Classification of Coals by Rank
|
60.45(f)(4)(i), (ii), (vi)
60.41a of Subpart D 60.41b of Subpart Db 60.41c of Subpart Dc |
|
ASTM D396–78, 89, 90, 92, 96, 98, Standard Specification for Fuel Oils
|
60.17(a)
60.40b 60.41b 60.41c 60.111(b) 60.111a(b) |
|
ASTM D975–78, 96, 98a, Standard Specification for Diesel Fuel Oils
|
60.17
60.111(b) 60.111a(b) |
|
ASTM D1072–56, 75, 80, 90, 94, Standard Test Method for Total Sulfur in Fuel Gases
|
60.17, 60.335(b)(2)
60.335(d) |
|
ASTM D 1072-90 (Reapproved 1999) Standard Test Method for Total Sulfur in Fuel Gases
|
60.17, 60.4415(a)(1)(ii)
|
|
ASTM D1137–53 (Reapproved 1975), Standard Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer
|
60.45(f)(5)(i)
|
|
ASTM D1193–77, 91, Standard Specification for Reagent Water
|
60.17(a)(22)
|
|
ASTM D1266–87, 91, 98 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
60.17(a)(18)
60.106(j)(2) |
|
ASTM D1266–98 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
60.335
|
|
ASTM D 1266-98 (Reapproved 2003) Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
60.17, 60.4415(a)(1)(ii)
|
|
ASTM D1475–60, (Reapproved 1980), 90, Standard Test Method for Density of Paint, Varnish Lacquer, and Related Products
|
60.17(a)(19)
60.435(d)(1) |
|
ASTM D1552–83, 95 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
|
60.17(a)(20)
60.106(j)(2) |
|
ASTM D 1552-03, Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
|
60.17, 60.4415(a)(1)(ii)
|
|
ASTM D1826–77, 94 Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
|
60.45(f)(5)(ii)
60.46(c)(2) 60.296(b)(3) |
|
ASTM D1835–87, 91, 97, 03a, Standard Specification for Liquefied Petroleum (LP) Gases
|
60.17(a)(22)
|
|
ASTM D1835–03a, Standard Specification for Liquefied Petroleum (LP) Gases, 2003
|
60.41(a) of Subpart Da
60.41b of Subpart Db and 60.41c of Subpart Dc |
|
ASTM D1945–64, 76, 91, 96, Standard Method for Analysis of Natural Gas by Gas Chromatography
|
60.17(23)
60.45(f)(5)(i) |
|
ASTM D1946–77, 90, (Reapproved 1994) Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
60.17(a)(24)
60.45(f)(5)(i) 60.18(f)(3) 60.614(e)(2)(ii) 60.614(e)(4) 60.664(e)(2)(ii) and (e)(4) 60.564(f)(1) 60.564(f)(2) 60.704(d)(2((i) and (d)(4) |
|
ASTM D2013–72, 86, Standard Method of Preparing Coal Samples for Analysis
|
60.17(a)(25)
|
|
ASTM D2015–77, (Reapproved 1978), 96, Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter
|
60.17(a)(26)
60.45(f)(5)(ii) 60.46(c)(2) |
|
ASTM D2016–74 (Reapproved 1983), Standard Text Methods for Moisture Content of Wood
|
60.17(a)(53)
|
|
ASTM D2234–76, 96, 97a, 97b, 98, Standard Methods for Collection of a Gross Sample of Coal
|
60.17(a)(28)
|
|
ASTM D2369–81, 87, 90, 92, 93, 95, Standard Test Method for Volatile Content of Coatings
|
60.17(a)(29)
|
|
ASTM D2382–76, 88, Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High Precision Method)
|
60.17(a)(30)
60.18(f)(3) 60.485(g)(6) 60.614(e)(4) 60.664(e)(4) 60.564(f)(3) 60.704(d)(4) |
|
ASTM D2504–67 (Reapproved 1977), 88, (Reapproved 1993), Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography
|
60.17(a)(31)
60.485(g)(5) |
|
ASTM D2584–68, 79, (Reapproved 1985), 94, Standard Test Method for Ignition Loss of Cured Reinforced Resins
|
60.17(a)(32)
60.685(c)(3)(i) |
|
ASTM D2622–87, 94, 98, Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
|
60.17(a)(33)
60.106(j)(2) |
|
ASTM D 2622-05, Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
|
60.17, 60.4415(a)(1)
|
|
ASTM D2879–83, 96, 97, Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
60.17(a)(34)
60.485(e)(1), 60.111b(f)(3), 60.116b(e)(3)(ii), 60.116b(f)(2)(i) |
|
ASTM D2880–78, 96, Standard Specification for Gas Turbine Fuel Oils
|
60.17 (a)(35)
60.111(b) 60.111a(b) 60.335(d) |
|
ASTM D2908–74, 91, Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
|
60.17(a)(36)
60.564(j) |
|
ASTM D2986–71 (Reapproved 1978), 95a, Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
60.17(a)(37)
|
|
ASTM D3031–81. Standard Test Method for Total Sulfur in Natural gas by Hydrogenation
|
60.335(b)(2)
|
|
ASTM D3173–73, 87, Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
|
60.17(a)(39)
|
|
ASTM D3176–74, 89, Standard Method for Ultimate Analysis of Coal and Coke
|
60.17(a)(40)
60.45(f)(5)(i) |
|
ASTM D3177–75, 89, Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke
|
60.17(a)(41)
|
|
ASTM D3178–73, (Reapproved 1979), 89, Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
|
60.17(a)(42)
60.45(f)(5)(i) |
|
ASTM D3246–81, 92, 96, Standard Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
|
60.17 (a)(43)
60.335(d) |
|
ASTM D 3246-05, Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
|
60.17, 60.4415(a)(1)(ii)
|
|
ASTM D3286–85, 96, Standard Test Method for Gross Calorific Value of Coal and Coke by the Isothermal-Jacket Bomb calorimeter
|
60.17(a)(45)
|
|
ASTM D3370–76, 95a, Standard Practices for Sampling Water
|
60.17(a)(46)
60.564(j) |
|
ASTM D3431–80, Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons (Microcoulometric Method)
|
60.17(a)(46)
|
|
ASTM D3792–79, 91, Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection Into a Gas Chromatograph
|
60.17(a)(47)
|
|
ASTM D4017–81, 90, 96a, Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method
|
60.17(a)(48)
|
|
ASTM D4057–81, Standard Practive for Manual Sampling of Petroleum and Petroleum Products
|
60.17(a)(51)
|
|
ASTM D 4057-95 (Reapproved 2000), Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
60.17, 60.4415(a)(1)
|
|
ASTM D4084–82, 94, Standard Method for Analysis of Hydrogen Sulfides in Gaseous Fuels (Lead Acetate Reaction Rate Method)
|
60.17(a)(50)
60.335(d) |
|
ASTM D 4084-05, Standard Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
|
60.17, 60.4360, 60.4415(a)(1)
|
|
ASTM D 4177-95 (Reapproved 2000), Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
|
60.17, 60.4415(a)(1)
|
|
ASTM D4239–85, 94, 97, Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
|
60.17(a)(52)
|
|
ASTM D 4294-03, Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry
|
60.17, 60.4415(a)(1)(ii)
|
|
ASTM D4442–84, 92, Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood–base Materials
|
60.17(a)(53)
|
|
ASTM D4457–85, (Reapproved 1991), Test Method for Determination of Dichloromethane and 1,1,1–Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
|
60.17(a)(55)
|
|
ASTM D 4468–85 (Reapproved 2000): Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
|
60.17, 60.4415(a)(1)(ii)
|
|
ASTM D 4629–02, Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection, 2002
|
60.49b(e)
|
|
ASTM D 4810-88 (Reapproved 1999): Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
|
60.17, 60.4360, 60.4415(a)(1)(ii)
|
|
ASTM D 5287-97 (Reapproved 2002): Standard Practice for Automatic Sampling of Gaseous Fuels
|
60.17, 60.4415(a)(1)(ii)
|
|
ASTM D 5453-05, Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and
Oils by Ultraviolet Fluorescence |
60.17, 60.4415(a)(1)(ii)
|
|
ASTM D 5504-01, Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels
by Gas Chromatorgraphy and Chemiluminescence |
60.17, 60.4360
|
|
ASTM D 6216–98, Standard Practice for Opacity Monitor Manufacturers To Certify Conformance with Design and Performance Specifications
|
60.17(a)
|
|
ASTM D 6228-98 (Reapproved 2003): Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
|
60.17, 60.4360, 60.4415(a)(1)(ii)
|
|
ASTM D 6348-03, Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
60.17
Part 60, Subpart IIII, Table 7 |
|
ASTM D 6667-04, Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and
Liquefied Petroleum Gases by Ultraviolet Fluorescence |
60.17, 60.4415(a)(1)(ii)
|
|
ASTM D 6784–02, Standard Test Method for Elemental, Oxidized, Particle-bound and Total Mercury in Flue Gas Generated from Coal-fired Stationary Sources (Ontario Hydro Method)
|
Part 60, Appendix B, section 8.6.2
|
|
ASTM E168–67 (Reapproved 1977), 92, General Techniques of Infrared Qualitative Analysis
|
60.17(a)(59)
60.485(d) 60.593(b)(2) 60.632(f) |
|
ASTM E169–63 (Reapproved 1977), 93, General Techniques of Ultraviolet Quantitative Analysis
|
60.17(a)(60)
60.485(d) 60.593(b)(2) 60.632(f) |
|
ASTM E260–73, 91, 96, General Gas Chromatography Procedures
|
60.17(a)(61)
60.485(d) 60.593(b)(2) 60.632(f) |
Three Park Avenue, New York, NY 10016–5990; Order inquiries: 22 Law Drive, P.O. Box 2900, Fairfield, New Jersey 07007; Phone: 1-800-843-2763
| Publication | CFR Reference |
|---|---|
|
ASME Interim Supplement 19.5 on Instruments and Apparatus; Application, Part II of Fluid Meters, 6th Edition (1971)
|
60.17
60.58a(h)(6)(ii) 60.58b(i)(6)(ii) 60.1320(a)(4) 60.1810(a)(4) |
|
ASME PTC 4.1–1964 (Reaffirmed 1991), Power Test Codes: Test Code for Steam Generating Units (with 1968 and 1969 Addenda)
|
60.17(h)
60.46b 60.58a(h)(6)(ii) 60.58b(i)(6)(ii), 60.1320(a)(3) 60.1810(a)(3) |
|
ANSI/ASME PTC 19.10–1981, Flue and Exhaust Gas Analyses: Part 10, Instruments and Apparatus
|
60.17
Part 60, Subpart EEEE, Tables 1 and 3 Subpart FFFF, Tables 2 and 4 60.106 of Subpart J 60.104a, 60.105a, 60.106a, 60.107a of Subpart Ja 60.4415(a) |
|
ASME QRO–1–1994 Standard for the Qualification and Certification of Resource Recovery Facility Operators
|
60.17
60.56a 60.54b(a) 60.54b(b), 60.1185(a), 60.1185(c)(2) 60.1675(a) 60.1675(c)(2) |
481 N. Frederick Ave., Suite 500, Gaithersburg, MD 20877–2407; Telephone: (301) 924–7077
| Publication | CFR Reference |
|---|---|
|
AOAC Method 9, Official Methods of Analysis of the Association of Official Analytical Chemists, Eleventh Edition, 1970, pp. 11–12
|
60.204(d)(2)
60.214(d)(2) 60.224(d)(2) 60.234(d)(2) |
6526 East 60th Street, Tulsa, Oklahoma 74145
| Publication | CFR Reference |
|---|---|
|
GPA Method 2377-86: Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes
|
60.17
60.105 of Subpart J 60.107a of Subpart Ja 60.4360 60.4415 |
Available from: National Technical Information Services, 5285 Port Royal Road, Springfield, VA 22161
| Publication | CFR Reference |
|---|---|
|
NTIS No. PB 93–192–664. OMB Bulletin No. 93–17. Revised Definitions for Metropolitan Areas (MAs), June 30, 1993
|
60.17
|
Dunwoody Park, Atlanta, Georgia 30341
| Publication | CFR Reference |
|---|---|
|
TAPPI Method T624 os–68
|
60.285(d)(4)
|
401 M Street, SW., Washington, DC 20460
| Publication | CFR Reference |
|---|---|
|
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, EPA Publication SW–846 Third Edition (November, 1986), as amended by Updates I (July 1992), II (September 1994), IIA (August 1993) and IIB (January 1995)
|
60.17(a)(22)(i)
|
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112; Telephone: (800) 854–7179 or Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105; Telephone: (800) 854–7179
| Publication | CFR Reference |
|---|---|
|
UL 103, Sixth Ed., revised as of September 3, 1986, Standard for Chimneys, Factory-built, Residential Type and Building Heating Appliance
|
60.17(f)(1)
|
6980 SW Barnes Road, Portland Oregon 97223
| Publication | CFR Reference |
|---|---|
|
West Coast Lumber Standard Grading Rules, No. 16, pages 5–21, 90, and 91, September 3, 1970, revised 1984
|
60.17(g)(1)
|