American Conference of Governmental Industrial Hygienists
P.O. Box 1937, Cincinnati, OH 45201
| Publication |
CFR Reference |
Threshold Limit Values for Substances in Workroom Air (1972)
|
70.1900
|
TLVs: Threshold Limit Values for Chemical Substances in Workroom Air (1973)
|
56.5001
57.5001
|
TLVs: Threshold Limit Values of Airborne Contaminants (1972)
|
71.700
75.322
|
American Insurance Association
85 John St., New York, NY 10038
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036; Telephone: (212) 642–4900
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Order inquiries: 22 Law Drive, P.O. Box 2900, Fairfield, New Jersey 07007; Phone: 1-800-843-2763
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
| Publication |
CFR Reference |
Book of ASTM Standards, 1968: Part 28, Rubber, Carbon Black; Gaskets
|
75.705-8
77.704-8
|
ASTM E 72–80 Standard Methods of Conducting Strength Tests of Panels for Building Construction
|
75.333(e)(1)(i)
|
ASTM E 119–88 Standard Test Methods for Fire Tests of Building Construction and Materials
|
75.301
75.1900
|
ASTM E 162–87 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
|
75.333(d), (e), and (f)
75.335(a)
|
ASTM F 496-97, Standard Specification for In-Service Care of Insulating Gloves and Sleeves
|
75.818
|
American Welding Society
550 N.W. LeJeune Road, Miami, FL 33126
| Publication |
CFR Reference |
AWS D1.1–1973 Structural Welding Code
|
77.403a
|
AWS D14.4–77, Classification and Application of Welded Joints for Machinery and Equipment
|
7.304
|
California, State of
| Publication |
CFR Reference |
California Administrative Code: Title 8
|
|
Article 7—Logging and Sawmill Safety Orders Section 5243—Tractor Yarding (Register 69, No. 10—3–8–69)
|
77.403a
|
Article 10—Construction Safety Orders Sections 1591(i) and 1596—Haulage and Earth Moving (Register 70, No. 40—10–3–70)
|
77.403a
|
Section 2655—Overhead Guards for High-Lift Rider Trucks (Register 72, No.6—2–8–72)
|
77.403
|
Corps of Engineers, Department of the Army
| Publication |
CFR Reference |
EM–385–1–1 General Safety Requirements, 1967
|
77.403a
|
Department of Defense
DODSSP Standardization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 19111–5098
| Publication |
CFR Reference |
Military specifications:
|
|
MIL–F–15160D Fuses; Instrument, Power, and Telephone
|
28.31
|
MIL–STD–105D Sampling Procedures and Tables for Inspection by Attributes
|
29.41
|
MIL–STD–248 Welding and Brazing: Procedure and Performance Qualification
|
77.403a
|
MIL–STD–414 Sampling Procedures and Tables for Inspection by Variables for Percent Defective
|
29.41
|
Institute of Electrical and Electronics Engineers, Inc.
Service Center, 445 Hoes Lane, Piscataway, NJ 08855; Telephone: (800) 678–4333
| Publication |
CFR Reference |
IEEE standard No. 32—1972 Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
|
75.1719-2
77.801-1
77.901-1
|
Department of the Interior
| Publication |
CFR Reference |
Bureau of Mines Instruction Guide No. 2—MSA W–65 Self Rescuer (1972)
|
57.18028
|
Bureau of Mines Instruction Guide No. 3—Permissible Drager 810 Respirator for Self-Rescue (1972)
|
57.18028
|
Bureau of Mines Instruction Guide No. 19—Mine Emergency Training (1972)
|
57.18028
|
Institute of Makers of Explosives
1420 Lexington Ave., New York, NY 10017
International Electrical Commission
Central Office 3, rue de Varembe, P.O. Box 131, CH-1211, Geneva 20, Switzerland
| Publication |
CFR Reference |
IEC 60079-0: Standards for Electrical Apparatus for Explosive Gas Atmospheres—Part 0: General, Fourth edition, January 2004
|
7.10
18.6
|
IEC 60079-1: Standards for Electrical Apparatus for Explosive Gas Atmospheres—Part 1: Flameproof Enclosures “d”, Fifth edition, November 2003
|
7.10
18.6
|
Mine Safety and Health Administration, Department of Labor
| Publication |
CFR Reference |
MSHA Information Report No. IR 1240 (1996): Calibration and Maintenance Procedures for Coal Mine Respirable Dust Samplers
|
70.204
71.204
90.204
|
National Board of Boiler and Pressure Vessel Inspectors
1055 Crupper Ave., Columbus, OH 43229
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
National Institute of Standards and Technology (formerly National Bureau of Standards), Department of Commerce
| Publication |
CFR Reference |
National Electrical Safety Code, 1961; Part 2: Safety Rules for the Installation and Maintenance of Electric Supply and Communications Lines; and Supplement 2 (1968)
|
56.12047
57.12047
|
National Electrical Safety Code, 1971
|
77.807-1
|
Society of Automotive Engineers
400 Commonwealth Dr., Warrendale, PA 15096; Telephone: (412) 776–4841
| Publication |
CFR Reference |
SAE J167—1974 Protective Frame with Overhead Protection—Test Procedures and Performance Requirements
|
77.403a
|
SAE J231—1971 Minimum Performance Criteria for Falling Object Protection Structures (FOPS)
|
77.403
|
SAE J320a—1967 (R 69; 1970 editorial change) Roll–Over Protective Structures for Rubber-Tired Self-Propelled Scrapers
|
77.403a
|
SAE J320b—1967 (R 72; 1972 editorial change) Roll-Over Protective Structures for Prime Movers
|
77.403a
|
SAE J334a—1968 (R 70) Protective Frame Procedure and Performance Requirements
|
77.403a
|
SAE J386—1985, 1993, 1997 Operator Restraint System for Off-road Work Machines
|
56.14130
56.14131
57.14130
57.14131
|
SAE J394—1969 (1970 editorial change) Roll-Over Protective Structures for Rubber-Tired Front-End Loaders and Rubber-Tired Dozers
|
77.403a
|
SAE J394a—1969 (R 72; 1972 editorial change) Roll-Over Protective Structures for Wheeled Front-End Loaders and Wheeled dozers
|
77.403a
|
SAE J395—1969 (1970 editorial change) Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders
|
77.403a
|
SAE J395a—1969 (R 72; 1972 editorial change) Roll-Over Protective Structures for Track-Type Tractors and Track-Type Front-End Loaders
|
77.403a
|
SAE J396—1969 (1970 editorial change) Roll-Over Protective Structures for Motor Graders
|
77.403a
|
SAE J396a—1969 (R 72; 1972 editorial change) Roll-Over Protective Structures for Motor Graders
|
77.403a
|
SAE J397—1969 Critical Zone—Characteristics and Dimensions for Operators of Construction and Industrial Machinery
|
77.403a
|
SAE J397a—1969 (R 72; 1973 editorial change) Deflection Limiting Volume for Laboratory Evaluation of Roll-Over Protective Structures (ROPS) and Falling Object and Protective Structures (FOPS) of Construction and Industrial Vehicles
|
77.403a
|
SAE J429d—1967 Mechanical and Quality Requirements for Externally Threaded Fasteners
|
77.403a
|
SAE J429e—1969 Mechanical and Quality Requirements for Externally Threaded Fasteners
|
77.403a
|
SAE J429f—1971 Mechanical and Quality Requirements for Externally Threaded Fasteners
|
77.403a
|
SAE J429g—1977 Mechanical and Quality Requirements for Externally Threaded Fasteners
|
77.403a
|
SAE J995—1967 Mechanical and Quality Requirements for Steel Nuts
|
77.403a
|
SAE J995a—1969 Mechanical and Quality Requirements for Steel Nuts
|
77.403a
|
SAE J995b—1971 Mechanical and Quality Requirements for Steel Nuts
|
77.403a
|
SAE J1040—1986 Performance Criteria for Roll-over Protective Structures for Construction, Earthmoving, Foestry, and Mining Machines
|
56.14130
57.14130
|
SAE J1194—1983, 1989, 1994, 1999 Roll-over Protective Structures for Wheeled Agricultural Tractors
|
56.14130
57.14130
|
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112; Telephone: (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105; Telephone: (800) 854–7179
| Publication |
CFR Reference |
UL–198—1971 UL Standard for Alternating Current Fuses
|
28.40
|
Addresses
MSHA District Office Addresses
Coal Mine Safety and Health
|
District 1, 7 North Wilkes-Barre Boulevard, Wilkes-Barre, PA 18702.
|
|
District 2, 319 Paintersville Road, Hunker, PA 15639
|
|
District 3, 5012 Mountaineer Mall, Morgantown, WV 26505
|
|
District 4, 100 Bluestone Road, Mount Hope, WV 25880
|
|
District 5, Wise County Plaza, 2nd Floor, P.O. Box 560, Norton, VA 24273
|
|
District 6, 100 Fae Ramsey Lane, Pikeville, KY 41501–3211
|
|
District 7, 3837 S. U.S. Highway 25E, Barbourville, KY 40906
|
|
District 8, 2300 Willow Street, Suite 200, Vincennes, IN 47591
|
|
District 9, 730 Simms Street, Room 440, Golden, CO 80401
|
|
District 10, 100 YMCA Drive, Madisonville, KY 42431–9019
|
|
District 11, 135 Gemini Circle, Suite 213, Birmingham, AL 35209
|
|
MSHA District Office Addresses
Metal and Nonmetal Mine Safety and Health
|
|
Northeastern District, 547 Keystone Drive, Warrendale, PA 15086–7573
|
|
Southeastern District, 135 Gemini Circle, Suite 212, Birmingham, AL 35209
|
|
North Central District, 515 West First Street, Number 333, Duluth, MN 55802–1302
|
|
South Central District, 1100 Commerce Street, Room 462, Dallas, TX 75242–0499
|
|
Rocky Mountain District, 730 Simms Street, Golden, CO 80401–4720
|
|
Western District, 2060 Peabody Road, Suite 610, Vacaville, CA 95687
|
Metal and Nonmetal Mine Safety and Health
|
Northeastern District, 547 Keystone Drive, Warrendale, PA 15086–7573
|
|
Southeastern District, 135 Gemini Circle, Suite 212, Birmingham, AL 35209
|
|
North Central District, 515 West First Street, Number 333, Duluth, MN 55802–1302
|
|
South Central District, 1100 Commerce Street, Room 462, Dallas, TX 75242–0499
|
|
Rocky Mountain District, 730 Simms Street, Golden, CO 80401–4720
|
|
Western District, 2060 Peabody Road, Suite 610, Vacaville, CA 95687
|