The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .
2211 West Bradley Avenue, Champaign Illinois 61821
| Publication | CFR Reference |
|---|---|
|
AOCS Official Method Ca 3a-46: “Insoluble Impurities,” 5th edition, 1997
|
189.5
|
|
AOCS Method Ca 5a-40, Free Fatty Acids (Reapproved 1989)
|
184.1472
|
|
AOCS Method Ca 6b-53, Unsaponifiable Matter (Reapproved 1989)
|
184.1472
|
|
AOCS Method Ca 18c-91, Determination of Lead by Direct Graphite Furnace Atomic Absorption Spectrophotometry (Revised 1992)
|
184.1472
|
|
AOCS Method Ca 18c-91, Determination of Lead by Direct Graphite Furnace Atomic Absorption Spectrophotometry (Revised 1995)
|
172.736
|
|
AOCS Method Cd 9–57, “Oxirane Oxygen,” reapproved 1989
|
172.723
|
|
AOCS Method Cd 1–25, “Iodine Value of Fats and Oils Wijs Method” Revised 1993
|
172.723
|
|
AOCS Method Cd 3-25, Saponification Value (Reapproved 1989)
|
184.1472
|
|
AOCS Method Cd 8-53, Peroxide Value, Acetic Acid – Chloroform Method (Updated 1992)
|
184.1472
|
|
AOCS Method Trla-64T Titer Test
|
178.3780(b)(2)
|
|
AOCS Method Tlla-64T Saponification Value
|
178.3780(b)(3)
|
|
AOCS Method Te 3a–64 Acid Value and Free Amine Value of Fatty Quaternary Ammonium Chlorides, Second Printing including additions and revisions, 1990
|
173.400(b)
|
|
Official Methods and Recommended Practices of the American Oil Chemists’ Society, 3d Edition (1985) Vol. 1, “Free Fatty Acids”
|
172.867
|
|
Official Methods and Recommended Practices of the American Oil Chemists’ Society, 4th Ed. (1989) Vol. 1, “Moisture”
|
172.867
|
|
Official Methods and Recommended Practices of the American Oil Chemists’ Society, 4th Ed. (1989) Vol. 1, “Peroxide Value”
|
172.867
|
|
Recommended Practice Cd 8b-90, Peroxide Value, Acetic Acid – Isooctane Method (Updated 1992)
|
184.1472
|
|
Recommended Practice Cd Id-92, Iodine Value of Fats and Oils, Cyclohexane – Acetic Acid Method
|
184.1472
|
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, Telephone (610) 832-9585, FAX (610) 832-9555
| Publication | CFR Reference |
|---|---|
|
ASTM D 5–73 (Reapproved 1978) Standard Method of Test for Penetration of Bituminous Materials
|
176.170(a)(5)
|
|
ASTM D 36–76 Standard Test Method for Softening Point of Asphalts and Tar Pitches (Ring and Ball Apparatus)
|
176.170(a)(5)
|
|
ASTM D 86–82 Standard Method for Distillation of Petroleum Products
|
172.250(b)(3)
172.864(b)(2) 172.882(a) 178.3530(a) 178.3620(d)(1)(i) 178.3910(a)(4)(i)(a) |
|
ASTM D 88–81 Standard Method of Test for Saybolt Viscosity
|
178.3870(f)(4)
178.3910 |
|
ASTM D 127–60 Standard Method of Test for Melting Point of Petrolatum and Microcrystalline Wax
|
176.180(b)(2)
177.1200(c) |
|
ASTM D 156–82 Standard Method of Test for Saybolt Color of Petroluem Products (Saybolt Chromometer Method)
|
178.3620(b)(1)(i)
178.3910(a)(4)(i)(c) |
|
ASTM D 381–80 Standard Method of Test for Existent Gum in Fuels by Jet Evaporation
|
172.882(a)
172.250 178.3530(a) 178.3910(a)(4)(i)(b) and (b)(2) |
|
ASTM D 388–38 Standard Specifications for Classification of Coals by Rank
|
173.25(a)(2)
|
|
ASTM D 445–74 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculations of Dynamic Viscosity)
|
177.1430(c)(2)
177.1520(d)(5) 178.3740(b) |
|
ASTM D 445–82 Test Method for Kinematic Viscosity of Transparent Opaque Liquids (and the Calculations of Dynamic Viscosity)
|
178.3740(b)
|
|
ASTM D 465–82 Standard Test Methods of Test for Acid Number of Rosin
|
178.3870(f)(3)
|
|
ASTM D 509–70 (Reapproved 1981) Standard Methods of Sampling and Grading Rosin
|
178.3870(f)(1)
|
|
ASTM D 566–76 (Reapproved 1982) Standard Method for Dropping Point of Lubricating Grease
|
172.210
178.3690(b)(1) 178.3770(a)(1), (b)(1), and (d)(1) |
|
ASTM D 611–82 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
|
176.170
177.1520(b) |
|
ASTM D 721–56T Tentative Method of Test for Oil Content of Petroleum Waxes
|
172.615(a)
175.250(b)(2) |
|
ASTM D 729–81 Standard Specifications for Vinylidene Chloride Molding Compounds
|
179.45
|
|
ASTM D 938–71 (Reapproved 1980) Standard Method of Test for Congealing Point of Petroleum Waxes, including Petrolatum
|
172.615(a)
175.250(b)(1) |
|
ASTM D 968–81 Standard Test Methods for Abrasion Resistance of Organic Coatings by the Falling Abrasive Tester
|
177.1590
177.1650 |
|
ASTM D 1218–82 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
|
178.2010
|
|
ASTM D 1238–82 Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer
|
176.170(b)(2)
177.1312(c)(2) 177.1520(d)(7) 177.1550(d)(2) 177.1570(b)(1)(iii) |
|
ASTM D 1238–82 Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer
|
177.1350(b)(2)
|
|
ASTM D 1240–82 Standard Method of Test for Rosin Acids in Fatty Acids
|
172.862(b)(2)
|
|
ASTM D 1243–79 Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers
|
175.270(b)
175.300(b)(3) (xxix) 176.170(a)(5) 177.1480(b)(1) (ii) 177.1950(c) (1)(ii) 177.1960(b) (1)(ii) 177.2460(c)(1) 177.1970(c) (1)(ii) 177.1980(c) (1)(ii) 179.45(c)(2)(iv) |
|
ASTM D 1303–55 (Reapproved 1979) Standard Method of Test for Total Chlorine in Vinyl Chloride Polymers and Copolymers
|
177.1610(a)
|
|
ASTM D 1353–78 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
|
172.882
178.3530 178.3910 |
|
ASTM D 1386–78 Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
|
178.3690(b)(2)
178.3770(a)(2), (b)(2), and (d)(2) |
|
ASTM D 1387–78 Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
|
178.3690(b)(3)
178.3770(a)(3), (b)(3), and (d)(3) |
|
ASTM D 1418–81 Standard Practice for Rubber and Rubber Latices—Nomenclature
|
177.2600(c)(4)(i)
|
|
ASTM D 1434–82 Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
|
177.1040
|
|
ASTM D 1457–56T Test for Thermal Instability Index of Tetrafluoroethylene Homopolymer
|
177.1550(d)(3)
|
|
ASTM D 1492–78 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
|
177.1430(c)(3)
178.3740 |
|
ASTM D 1500–82 Standard Method of Test for ASTM Color of Petroleum Products (ASTM Color Scale)
|
178.3620(c)(1)(ii)
|
|
ASTM D 1505–68 (Reapproved 1979) Standard Test Method for Density of Plastics by the Density-Gradient Technique
|
177.1320(c)(1)(iii)
177.1570 177.1520(d)(1) 177.1630 177.2480(c)(3) |
|
ASTM D 1505–85 (Reapproved 1990) Standard Test Method for Density of Plastics by Density-Gradient Technique
|
177.1345(b)
|
|
ASTM D 1525–87 Standard Test Method for Vicat Softening Temperature of Plastics
|
177.1345(b)
|
|
ASTM D 1545–76 (Reapproved 1981) Standard Method of Test for Viscosity of Transparent Liquids by Bubble Time Method
|
176.170(a)(5)
|
|
ASTM D 1601–78 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
|
177.1520(d)(9)
177.1570(b)(1)(ii) |
|
ASTM D 1646–81 Standard Test Method for Rubber-Viscosity and Volcanization Characteristics (Mooney Viscometer)
|
177.1210(b)(5)
177.1520(d)(6) |
|
ASTM D 1646–92 Standard Test Method for Rubber—Viscosity and Vulcanization Characteristics (Mooney Viscometer)
|
177.2600(c)(4)(i)
|
|
ASTM D 1747–62 (Reapproved 1978) Standard Test Method for Refractive Index of Viscous Materials and Organosols at Low Shear Rates by Brookfield Viscometer
|
178.3870(f)(2)
|
|
ASTM D 1824–66 (Reapproved 1980) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates by Brookfield Viscometer
|
178.3870(f)(4)
|
|
ASTM D 1962–67 (Reapproved 1979) Saponification Value of Drying Oils, Fatty Acids, and Polymerized Fatty Acids
|
178.2010(b)
|
|
ASTM D 2117–62T Tentative Method of Test for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method
|
177.1520(d)(2)(i)
177.1630(d)(4)(v) |
|
ASTM D 2133–66 Specifications for Acetal Resin Injection Molding and Extrusion Materials
|
177.2480(c)(4)
|
|
ASTM D 2236–70 Standard Method of Test for Dynamic Mechanical Properties of Plastics by Means of a Torsional Pendulum
|
177.1810(c)(1)(i)
|
|
ASTM D 2161–66 Standard Method of Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
|
178.3740(b)
|
|
ASTM D 2503–82 Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
|
175.300(b)(3)(xxxiii)
176.170(b)(2) 177.1430(c)(1) |
|
ASTM D 2857–70 (Reapproved 1977) Standard Method of Test for Dilute Solution Viscosity of Polymers
|
177.1560
177.2210(b) 177.2440(a) |
|
ASTM Method D 3236–88, Standard Test Method for Apparent Viscosity of Hot Metal Adhesives and Coating Materials
|
177.1520(b)
|
|
ASTM D 3275–89 Standard Specification for E–CTFE–Flouroplastic Molding, Extrusion, and Coating Materials
|
177.1380(a)(4)
|
|
ASTM D 3418–82 Standard Test Method for Transition Temperatures of Polymers by Thermal Analysis
|
177.1520(d)(8)
|
|
ASTM D 3536–76 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by Liquid Exclusion Chromatography (Gel Permeation Chromatography—GPC)
|
177.1990
177.2000 |
|
ASTM D 3835–79 (Reapproved 1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
|
177.1520(b)
|
|
ASTM E 28–67 (Reapproved 1982) Standard Test Method for Softening Point by Ring-and-Ball Apparatus
|
172.215
172.280 176.170 177.1520(b) (d)(2)(ii) 178.3870(b)(5) |
|
ASTM E 131–61T Definition of Terms and Symbols Relating to Absorption Spectroscopy (Revised 1961)
|
175.250(b)(3)
|
|
ASTM E 169–63 (Reapproved 1981) Recommended Practices for General Techniques of Ultraviolet Quantitative Analysis
|
178.3620(d)(3)
|
|
ASTM E 324–79 Standard Test Method for Relative Initial and Final Melting Range of Organic Chemicals
|
178.2010
|
|
ASTM F 34–76 (Reapproved 1980) Standard Test Methods for Liquid Extraction of Flexible Barrier Materials
|
176.170(d)(3)
177.1330(e)(4) 177.1360(b) 177.1670(b) |
481 N. Frederick Ave., Suite 500, Gaithersburg, MD 20877-2407 Telephone: (301) 924–7077
| Publication | CFR Reference |
|---|---|
|
Changes in Methods: “Glycyrrhizic Acid or Glycyrrhizic Acid Salts in Licorice” Vol. 65, pp. 471–472 (1982)
|
184.1408
|
|
“Flavors and Nonalcoholic Beverages” Vol. 56(5) 1281–1283 (1973)
|
189.110(c)
|
|
“Gas Chromatographic Determination of Safrole and Related Compounds in Nonalcoholic Beverages: Collaborative” Vol. 54(4) 900–902 (1971)
|
189.180(c)
|
|
“Gas-Solid Chromatographic Procedures for Determining Acrylonitrile Monomer in Acrylonitrile-Containing Polymers and Food Simulating Solvents” (Vol. 61, No. 6, pp. 1383–1388)
|
177.1030(c)(2)
177.1050(e)(4) 180.22(a) |
|
“Headspace Sampling and Gas-Solid Chromatographic Determination of Residual Acrylonitrile in Acrylonitrile Copolymer Solutions” Vol. 65, No. 2, p. 270 (1981)
|
177.1040
|
|
“Oils, Fats, and Waxes” Vol. 50(1) 216–218 (1967)
|
172.860(c)(3)
|
|
“Oils, Fats, and Waxes” Vol. 51(2) 489–490 (1968)
|
172.860(c)(3)
|
|
“Spectrophotometric Measurements under Specification” Vol. 45, p. 66 (1962)
|
172.878(a)(3)
172.882(a) 178.3530(a) 178.3620(b)(1)(ii) |
|
Official Methods of Analysis, 13th Ed., 1980
|
172.340(b)
172.372 172.385 172.510 172.860 173.395 176.170(d)(3) 177.2450 178.3690 184.1245 184.1366 184.1408(b)(1) 184.1979(a) and (b)(1) 184. 1979a(b)(1) 184.1979b(b)(1) 184.1979c(b)(1) 189.130 189.135 189.145 189.155 189.165 189.175 189.190 |
500 Fifth Street, NW, Washington, DC 20001; Internet address: http://www.nap.edu
5100 Paint Branch Parkway, Room 1C-100, College Park, Maryland 20740
| Publication | CFR Reference |
|---|---|
|
Absorptivity Methods “Determination of Softening Point (Drop Method)” Appendix A–2 “Determination of Unsaturation of Resin 1977” Appendix A–3
|
178.3610(a)
|
|
Acesulfame Potassium Assay
|
172.800(b)(1)
|
|
Amide-Imide Polymer Content—Analysis of Monomer Content
|
177.2450(b)(3)
|
|
Analysis of Cycopaco Resin for Residual B-(2-Hydroxyethyl mercapto) propionitrile
|
177.1020(b)
177.1030(b) |
|
Analysis for Dicholorbenzene in Ryton Polyphenylene Sulfide
|
177.2490(a)(3)
|
|
Analytical Chemistry, Vol. 49, p. 1090 (1977) “Atomic Absorption Spectrometric Determination of Sub-Part-Per-Million Quantities of Tin in Extracts and Biological Materials with a Graphite Furnace”
|
178.2650(b)(1)(ii)
|
|
Analytical Method for 10% Solution Viscosity of Tyril
|
177.1040(c)(2)
|
|
Analytical Method, “Determination of Free Phenol in Cyclized Rubber Resin”
|
176.170(b)(2)
|
|
Analytical Methods “Determination of Abietic Acid and Dehydroabietic Acid, in Rosins,” “Determination of Softening Point of Solid Resins,” “Determination of Saponification Number of Rosin Esters,” and “Determination of Phenolic Modification of Rosin Derivatives”
|
178.3870(f)(6)
|
|
“Analytical Method for the Determination of Aspartame and Diketopiperazine in Baked Goods and Baking Mixes,” October 8, 1992, as developed by the NutraSweet Co.
|
172.804(c)(23)(c)(2)
|
|
“Analytical Method of Determining the Amount of EVOH in the Extractive Residue of EVOH Film,” dated March 23, 1987
|
177.1360
|
|
Analytical Method for Determination of Residual Methylene Chloride in Polyestercarbonate Resin, as developed by the General Electric Co., dated July 23, 1991
|
177.1585(c)
|
|
Analytical Methods for Specification Tests for Curdlan, 1996
|
172.809(b)
|
|
“Method for Measuring the Ester Distribution of Sucrose Oligoesters,” dated June 17, 1998 as developed by the Mitsubishi Chemical Corporation
|
172.869
|
|
“Method for Analyzing the Purity of Sucrose Fatty Acid Esters,” dated June 17, 1998 as developed by the Mitsubishi Chemical Corporation
|
172.869
|
|
“Free Sucrose Method,” dated June 17, 1998 as developed by the Mitsubishi Chemical Corporation
|
172.869
|
|
“Biomedical Test Materials Program: Analytical Methods for the Quality Assurance of Fish Oil”, published in the “NOAA Technical Memorandum NMFS-SEFC-211”, F.M. Van Dolah and S.B. Galloway, editors, National Marine Fisheries Service, U.S. Department of Commerce
|
184.1472
|
|
Chlorine and Bromine—Coulometric Method by Aminco Chloridometer
|
177.2210(b)
|
|
Colorimetric Determination of Residual Quaternary Ammonium Compounds (Arquad HTL8) in Sugar and Sugar Solutions, June 13, 1990
|
173.400(c)
|
|
Determination of B-Dodecylmercaplopropionitrile in NR–16 Polymer
|
177.1050(b)
|
|
Determination of Copolymer Ratio in Vinylidene Chloride/Methyl Acrylate Copolymer
|
177.1990
|
|
Determination of Dimethyl Sulfoxide
|
172.859
|
|
Determination of Divinylbenzene in Alcohol Extracts in Amberlite XAD–4
|
173.65
|
|
“Determination of Esterified Glycerides and Polyoxyethlyene Glycols,” November 16, 2001 as developed by Gattefosse S.A.S.
|
172.736
|
|
“Determination of Ethyl Acetate” Test Method U.1, Sept. 29, 1981
|
172.859
|
|
“Determination of Ethylene Oxide and 1,4-Dioxane by Headspace Gas Chromatography,” November 5, 1998, as developed by Gattefosse S.A.S.
|
172.736
|
|
Determination of Isobutyl Alcohol
|
172.859
|
|
“Determination of Lysolecithin Content of Enzyme-Modified Lecithin: Method I”, dated 1985
|
184.1063(6)
|
|
“Determination of Melt Viscosity, Molecular Weight Distribution Index and Viscosity Stability”
|
177.1550(d)(2)(ii)
|
|
Determination of Molecular Weight Distribution of Poly (Maleic Acid) dated March 17, 1992
|
173.45(a)
|
|
Determination of Olestra by Size Exclusion Chromatography, dated December 19, 1995
|
172.867
|
|
Determination of PAH Content of Carbon Black, dated July 8, 1994, as developed by the Cabot Corporation
|
178.3297(e)
|
|
Determination of Potency of LMP-102, October 9, 2003
|
172.785
|
|
Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method
|
177.1020(c)(2)
177.1030(c)(2) 177.1040(c) 177.1050(c)(3) |
|
“Determination of Residual α,β-Olefinic and Trans Olefinic Unsaturation Levels in HNBR,” developed October 1, 1991 by Polysar Rubber Corp
|
177.2600(c)(4)(i)
|
|
Determination of Residual Maleic Anhydride in Polymers by Gas Chromatography
|
177.1820(c)(3)
|
|
Determination of Residual Vinylidene Chloride and Methyl Acrylate in Vinylidene Chloride/Methyl Acrylate Copolymer Resins and Films
|
177.1990(c)
|
|
Determination of Sodium Chlorite: 50 ppm to 1500 ppm Concentration, September 13, 1995
|
173.325
|
|
Determination of Tert-Butyl Alcohol in Polypropylene
|
177.1520
|
|
Determination of Total Acrylic in PP-MMA/BA Polymers, dated February 26, 1993
|
177.1520(b)
|
|
Determination of Total Organic Carbon by Automated Analyzer, March 30, 2001
|
172.785
|
|
Determination of Weight Average and Number Average Molecular Weight of 60/40 AA/AMPS (October 23, 1987)
|
173.310(c)
|
|
Determination of Weight Average and Number Average Molecular Weight of Sodium Polyacrylate
|
173.73(a)
|
|
“Differentiation of Nisin in Processed Cheese”, British Standards Institution, BS 4020, 1974
|
184.1538
|
|
Exhibit 33B of the report of the NAS/NRC A Comprehensive Survey of Industry on the use of Food Chemicals—GRAS, Sept. 1972
|
170.3(n) and (o)
|
|
Extracted Acrylonitrile Monomer by Differential Pulse Polarography
|
177.1020(c)(2)
177.1030(d)(2) 177.1040(c) |
|
Fishers Johns Method #18 in “Semimiero Qualitative Organic Analysis” Second Ed.
|
178.3780(b)(1)
|
|
Food Chemicals Codex, 2nd Ed., 1972
|
172.804(b)
|
|
Formaldehyde Release and Formaldehyde Analysis
|
177.2480(d)(2)(i)
|
|
Gas Chromatographic Determination of PMS and PET in PPMS Basic Polymers
|
177.1635(c)
|
|
Gas Chromatography Method for Dimethyl Carbonate Impurity in Dimethyl Dicarbonate
|
172.133(a)(2)
|
|
General Procedure for Determining Relative Viscosity of Polymers
|
177.1630
|
|
“Guide to Specifications for General Notices, General Analytical Techniques, Identification Tests, Test Solutions, and Other Referenced Materials,” Compendium of Food Additive Specifications, Addendum 4, Food and Agricultural Organization of the United Nations, Food and Nutrition Paper 5, Revision 2 (1991)
|
172.833(b)
|
|
Hypalon Synthetic Rubber—Determination of Sulfur by Parr Bomb
|
177.2210(b)
|
|
Infrared Spectrophotometric Determination of Polymers Extracted from Borex® 210 Resin Pellets
|
177.1050(d)
177.1480(b)(2) |
|
Intrinsic Viscosity (IV) of Lexan® Polycarbonate Resin By a Single Point Method Using Dichloromethane as the Solvent, July 23, 1991
|
177.1585(c)(1)
|
|
Intrinsic Viscosity Method–E–4 “Molecular Weight of Matrix Copolymer by Solution Viscosity”
|
177.1050(c)(2)
|
|
Intrinsic Viscosity (IV) of Lexan Polycarbonate Resin by a Single Point Method Using Dichloromethane as the Solvent, as developed by the General Electric Co., dated September 20, 1985
|
177.1585(c)
|
|
Intrinsic Viscosity of ULTEM Polyetherimide Using Chloroform as a Solvent
|
177.1595
|
|
Iodometric Method for the Determination of Available Chlorine Dioxide (50–250 ppm available Cl02), June 11, 1987
|
178.1010(c)(29)
(c)(40) |
|
Japan Institute of Fats and Oils Analysis Method of Residual Ethyl Esters of Fatty Acids
|
184.1259
|
|
Journal of the American Oil Chemists’ Society, Volume 52, January 4, 1975, “Rapid Quantitative Determination of Residual Hexane in Oils by Direct Gas Chromatography”
|
184.1259
|
|
Low Molecular Weight Anoxomer Analysis
|
172.105
|
|
LMP-102 Listeria Monocytogenes Sterility Testing, May 24, 2004
|
172.785
|
|
Measurement of Fatty Acid Composition of Olestra Test Material, dated December 19, 1995
|
172.867
|
|
Measurement of Relative Esther Distribution of Olestra Test Material, dated December 19, 1995
|
172.867
|
|
Method ECD-A-AC-G-V-1-5, “Determination of Dilute Solution Viscosity of Polyesters”, dated May 31, 1988
|
177.1637(b)(2)
|
|
Method for Determination of Intrinsic Viscosity of Maleic Anhydride Adduct of Crystalline Polypropylene
|
175.300(b)(3)(xix)
|
|
Method for Determining Residual Level of Poly(alkylacrylate) in Petroleum Wax
|
172.886
177.866 |
|
Method for Determining Weight-Average and Number-Average Molecular Weight and for Determining Alkylcrylate Monomer Content of Poly(alkylacrylate) used as Processing Aid in Manufacture of Petroleum Wax
|
172.886
177.866 |
|
Method for Measurement of the Stiffness of Olestra, dated December 19, 1995
|
172.867
|
|
Method to Determine Lytic Activity/Phage Titer, November 6, 2001
|
172.785
|
|
Method to Determine Microbial Contamination, July 11, 2003
|
172.785
|
|
Methodology for Ethylenimine Detection in Polyethylinimine
|
173.357
|
|
Methodology for Ethylene-dichloride Detection in Polyethylenimine
|
173.357
|
|
Methodology for Molecular Weight Determination of Polyethylenimine
|
173.357
|
|
Measurement of B-(2-Hydroxyethylmercapto) Propionitrile in Heptane Food-Stimulating Solvent
|
180.22(b)
|
|
Methyl Ethyl Ketone Test; Methyl Alcohol Test
|
172.859(b)(9)
|
|
Mooney Viscosity
|
177.1520
|
|
NBS Circular 484, U.S. Dept. of Commerce, 1949
|
172.250(b)(3)
172.886(b) 178.3770(a)(4) 178.3910(a)(4)(iii) |
|
Non-volative Extractives Method “Determination of Non-Volative Chloroform Soluble Residues in Retort Pouch Water Extractives”
|
177.1390(c)(3)(i)
|
|
Number Average Molecular Weight 2.4 “Osmometry”
|
177.2470(c)(2)
|
|
Plastics-Polyamides-Determination of Viscosity Number, ISO 307–1984(E)
|
177.1500(c)(5)
|
|
Phillips Petroleum Company Method VO–65R “Oxygen Flask Combustion-Gravemetric Method For Determination of Sulfur in Organic Compounds” (1965)
|
177.2490(a)(1)
|
|
Phillips Petroleum Company Method 6936–BH “Determination of the Inherent Viscosity of Polyphenylene Sulfide (1969)
|
177.2490(a)(2)
|
|
Preparation of Extracts
|
177.1550(e)
|
|
Procedure for the Determination of Molecular Weights of Acrylonitrile/Styrene Copolymers
|
177.1040
|
|
“Protein,” NAS in RDA's, NAS Pub. No. 1694, 7th Ed., 1968
|
172.320(c)(1)
|
|
Qualitative Identification of Kalrez® by Infrared Examination of Pyrolystate
|
177.2400(c)
|
|
Quantitation of Listeriolysin O Levels in LMP-102, September 27, 2004
|
172.785
|
|
Recommended Dietary Allowances, NAS Publication No. 1694, 7th Ed. (1968)
|
172.320(c)(1)
|
|
Residual Methyl Acrylate and Vinylidene Chloride Monomers in Saran MA/VDC Resins and Pellets by Headspace Gas Chromatography, March 3, 1986
|
177.1990(c)(3)
|
|
Solution Viscosity
|
177.2450(b)(2)
|
|
Specifications and Criteria for Biochemical Compounds, NAS/NRC Pub. 3rd Ed., 1972
|
172.320(b)(2)
|
|
Specifications and Analytical Methods for Neotame, dated April 3, 2001
|
172.829
|
|
“Specifications for Cetylpyridinium Chloride,” as published in the United States Pharmacopeia (USP 30), The National Formulary (NF 25), pages 1700-1701, May 2007
|
173.375
|
|
“Specifications for Identity and Purity of Some Antibiotics”, WHO, FAO, Nutrition Report Series, No. 45A, 1969
|
184.1538
|
|
Standard Methods for the Examination of Water and Wastewater, 20th Ed. (1998) – Method 4500-CIO2 E, “Amperometric II”
|
173.300
|
|
Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by Liquid Chromatography (Gel Permation Chromatography-GPC)
|
177.1990
|
|
Sucrose Fatty Acid Esters, Method of Assay
|
172.859
|
|
Synthetic Fatty Alcohols Method “Diols in Monohydroxy Alcohol by Miniature Thin Layer Chromatography (MTLC)”
|
178.3480(c)
|
|
Test Method [Normal-octanol] dated October 2003, and printed by Kuraray Co. Ltd.
|
172.864
|
|
The Determination of 3-Dimethylaminopropylamine in Food Simulating Extracts of Ion Exchange Resins, dated February 4, 1998
|
173.25(b)
|
|
The Determination of Epichlorophydrin and 1,3-Dichloro-2-Propanol in Dimethylamine-Epichlorohydrin Copolymer
|
173.60(b)
|
|
Total Amine Value
|
178.3130(b)
|
|
Total Available Methanol Method, dated December 19, 1995
|
172.867
|
|
Viscoelastometric method “Direct Reading Viscoelastometric Method for Determining Class Transition Points of Styrene Block Polymers”
|
177.1810(c)(1)(ii)
|
|
Viscosity Determination of n-butoxypoly (oxyethylene) poly (oxypropylene) glycol, dated April 26, 1995
|
173.340(a)(4)
|
|
“Yeasts—A Toxonomic Study,” 2nd Ed., 1970 by Jacomina Lodder
|
173.160(b)(2)
173.165(b)(2) |
5100 Paint Branch Parkway, College Park, 20740
| Publication | CFR Reference |
|---|---|
|
International Dairy Federation (IDF) Standard 140A: Cheese and Cheese Rind—Determination of Natamycin Content—Method by Molecular Absorption Spectrometry and by High-Performance Liquid Chromatography, 1992
|
172.155(c)
|
5100 Paint Branch Parkway, College Park, Maryland 20740
| Publication | CFR Reference |
|---|---|
|
ASTM D 1646–92: Standard Test Method for Rubber—Viscosity and Vulcanization Characteristics (Mooney Viscometer)
|
177.2600(c)(4)(i)
|
|
“Determination of Residual α,β-Olefinic and Trans Olefinic Unsaturation Levels in HNBR,” developed October 1, 1991 by Polysar Rubber Corp
|
177.2600(c)(4)(i)
|
5100 Paint Branch Parkway, College Park, Maryland 20740
| Publication | CFR Reference |
|---|---|
|
“Determination of 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) Peroxyacid/Peroxide-Containing Solutions”, August 21, 2001
|
173.370(c)
|
|
Hydrogen Peroxide and Peracid (as Peracetic Acid) Content, dated July 26, 2000
|
173.370(c)
|
12601 Twinbrook Parkway, Rockville, MD 20852
| Publication | CFR Reference |
|---|---|
|
The United States Pharmacopeia, (USP 30) National Formulary (NF 25): “Specifications for Cetylpyridinium Chloride,” pages 1700-1701, May 2007
|
173.375
|