Site Feedback

Website Feedback

This contact form is only for website help or website suggestions. If you have questions or comments regarding a published document please contact the publishing agency. Comments or questions about document content can not be answered by OFR staff. Please do not provide confidential information or personal data.

Incorporation by Reference

Title 16 — Commercial Practices
Material Approved for Incorporation by Reference

16 CFR (150–999) - Federal Trade Commission

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html .

Incorporation by Reference

Reader Aids help people use and understand the eCFR. Reader Aids information is not published in the Code of Federal Regulations.

American Petroleum Institute (API)

1220 L Street, NW., Washington, DC 20005

Publication CFR Reference
API Publication 1509, Fifteenth Edition, April, 2002, Engine Oil Licensing and Certification System
311.4

American Society of Mechanical Engineers

Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME

Publication CFR Reference
ASME A112.18.1M–1989, Plumbing Fixture Fittings
305.5
ASME A112.19.2M–1990, Vitreous China Plumbing Fixtures
305.5

American Society for Testing and Materials

100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, Telephone (610) 832-9585, FAX (610) 832-9555

Publication CFR Reference
ASTM C 177–04: Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
460.5
ASTM C 518–04: Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
460.5
ASTM C 739–03: Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
460.5
ASTM C 1045–01: Standard Practice For Calculating Thermal Transmission Properties under Steady-State Conditions
460.5
ASTM C 1114–00: Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
460.5
ASTM C 1149–02: Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
460.5
ASTM C 1224–03: Standard Specification for Reflective Insulation for Building Applications
460.5
ASTM C 1363–97: Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus
460.5
ASTM C 1371–04a: Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
460.5
ASTM C 1374–03: Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
460.5
ASTM E 408–71 (Reapproved 2002): Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
460.5

International Organization for Standardization (ISO)

c/o American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036

Publication CFR Reference
ISO 2076:1999(E):“Textiles—Man–made Fibres—Generic Names”
303.7

General Services Administration

1800 F Street NW, Washington DC 20405

Publication CFR Reference
GSA Specification HH-I-530A: Federal Specification, Insulation Board, Thermal (Urethane) dated November 22, 1971
460.5

Society of Automotive Engineers

485 Lexington Avenue, New York, New York 10017

Publication CFR Reference
Surface Vehicle Recommended Practice SAE J1634–1993–05–20, Electric Vehicle Energy Consumption and Range Test Procedure
309.22
Incorporation by Reference