US Department of Energy, Office of Policy and International Affairs
1000 Independence Avenue, SW; Washington, DC 20585
American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
1791 Tullie Circle, NE, Atlanta, Georgia 30329
| Publication |
CFR Reference |
Standard 90, Energy Conservation in New Building Design, Sections 4–9 (Aug. 11, 1975)
|
420.2
420.7
|
ASHRAE/IESNA 90.1–1989, Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings, including Addenda 90.16–1992, 90.1d–1992, 90.1e–1992. 90.1g–1993, 90.1i–1993
|
420.2
420.6
420.15
|
Council of American Building Officials
5203 Leesburg Pike, Falls Church, VA 22041
| Publication |
CFR Reference |
Model Energy Code, 1993, including Errata
|
420.2
420.6
420.15
|
Air–Conditioning and Refrigeration Institute
4100 North Fairfax Drive, Suite 200, Arlington, VA 22203; PHONE: 703-524-8800; FAX: 703-528-3816
| Publication |
CFR Reference |
ARI Standard 210/240–2003, Unitary Air–Conditioning and Air–Source Heat Pump Equipment
|
430.22
Part 430, Appendix M, Subpart B, Sections 1.3, 2.2, 2.6, 2.7, 3.1.3
|
ARI 280–74 Standard for Central Forced–Air Electric Heating Equipment
|
Part 430, Subpart B, Appendix N
|
ARI Standard 1200–2006 Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets
|
431.64
431.66
|
American Association of Textile Chemists and Colorists (AATCC)
P.O. Box 1215, Research Triangle Park, NC 27709 PHONE: 919-549-8141
| Publication |
CFR Reference |
AATCC Test Method 79-2000, Absorbency of Bleached Textiles
|
Part 430, Appendix J1 to Subpart B, 2.6.4.5.2
|
AATCC Test Method 118-1997, Oil Repellency Hydrocarbon Resistance Test
|
Part 430, Appendix J1 to Subpart B, 2.6.4.5.1
|
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
| Publication |
CFR Reference |
ANSI B38.1–1970 Method of Testing for Household Refrigerators, Combination Refrigerator Freezers and Household Freezers
|
Part 430, Subpart B, Appendix A and B
|
ANSI B149.1–1972 Dehumidifiers
|
Part 430, Subpart B, Appendix L
|
ANSI C16.13–1961 Monochrome Television Broadcast Receivers
|
Part 430, Subpart B, Appendix H
|
ANSI C78.1–1991, For Fluorescent Lamps—Rapid–Start Types—Dimensional and Electrical Characteristics
|
430.2
430.22
|
ANSI C78.2–1991, For Fluorescent Lamps—Preheat–Start Types—Dimensional and Electrical Characteristics
|
430.2
430.22
|
ANSI C78.3–1991, For Fluorescent Lamps—Instant–Start and Cold–Cathode Types—Dimensional and Electrical Characteristics
|
430.2
430.22
|
ANSI C78.21–1989, Incandescent Lamps – PAR and R Shapes
|
430.22
|
ANSI C78.375–1991, For Fluorescent Lamps—Guide for Electrical Measurements
|
430.2
430.22
|
ANSI C79.1–1994, Nomenclature for Glass Bulbs—Intended for Use with Electric Lamps
|
430.22
|
ANSI C82.2–1984 Flourescent Lamp Ballasts—Methods of Measurements, approved Oct. 21, 1983
|
Part 430, Appendix Q
|
ANSI C82.3—1983, For Reference Ballasts for Fluorescent Lamps
|
430.2
430.22
|
ANSI C82.6—2005, American National Standard for Lamp Ballasts—Ballasts for High-Intensity Dishcharge Lamps—Methods of Measurement (Proposed Revision of ANSI C82.6—1985)
|
431.324(b)
431.324(b)
|
ANSI Z11.182–1965 (R 1971), Standard Method of Test for Smoke Density in the Flue Gases from Distillate Fuels (ASTM D 2156–65 (1975))
|
Part 430, Subpart B, Appendix N and O
|
ANSI Z21.10.1–1975 Gas Water Heaters
|
Part 430, Subpart B, Appendix E
|
ANSI Z21.11.1–1974 ANS for Gas–Fired Room Heaters, Vol. 1, Vented Room Heaters
|
Part 430, Subpart B, Appendix O
|
ANSI Z21.13–1974 ANS for Gas–Fired Low Pressure Steam and Hot Water Heating Boilers
|
Part 430, Subpart B, Appendix N
|
ANSI Z21.44–1973 Gas Fired Gravity and Fan Type Direct Vent Wall Furnaces
|
Part 430, Subpart B, Appendix O
|
ANSI Z21.48–1976 Gas Fired Gravity and Fan Type Floor Furnaces
|
Part 430, Subpart B, Appendix O
|
ANSI Z21.49–1975 Gas Fired Gravity and Fan Type Vented Wall Furnace
|
Part 430, Subpart B, Appendix O
|
ANSI Z21.56–1994, Gas–Fired Pool Heaters
|
430.22
|
ANSI Z91.1–1972 ANS Performance Requirements for Oil–Powered Central Furnaces
|
Part 430, Subpart B, Appendix N
|
ANSI Z224.1–1971 Performance Evaluation Procedures for Household Washers (AHAM HLW–1, Dec. 1971)
|
Part 430, Subpart B, Appendix J
|
ANSI Z234.1–1972 Room Air Conditioners
|
Part 430, Subpart B, Appendix F
|
ANSI Z235.1–1972 Appliance Humidifier Standard (AHAM HU–1–72)
|
Part 430, Subpart B, Appendix K2
|
ANSI/AHAM DW–1–1992, American National Standard, Household Electric Dishwashers
|
430.22(b)(7)
430 Appendix C, Subpart B, Section 1.2
430 Appendix C, Subpart B, Section 1.8
430 Subpart C, Section 430.32(f)
|
ANSI/AMCA 210-99 (ASHRAE Standard 51-99), Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
|
430.22
Part 430, Appendix M, Subpart B, sections 1.11, 2.5.3, 2.6
|
ANSI/ASHRAE Standard 23ndash;1993, Method of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units
|
430.22
Part 430, Appendix M, Subpart B, sections 1.5, 3.11.2
|
ANSI/ASHRAE Standard 37–88 Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment
|
430.22
Part 430, Appendix M, Subpart B, Sections 1.6, 2.1, 2.2, 2.2.5, 2.4.1, 2.4.2, 2.5, 2.5.3, 2.6, 2.10.2, 2.10.3, 2.11, 2.13, 3.1.1, 3.1.5, 3.1.6, 3.3, 3.7, 3.9, 3.11.2, 3.11.3, 3.11.1.3
|
ANSI/ASHRAE 41.1–1986 (reaffirmed 2001), Standard Method for Temperature Measurement
|
430.22
Part 430, Appendix M, Subpart B, sections 1.7, 2.5, 2.5.4.2, 2.5.5, 2.5.6, 2.11
|
ANSI/ASHRAE 41.2–1987 (reaffirmed 1992), Standard Methods for Laboratory Airflow Measurement
|
430.22
Part 430, Appendix M, Subpart B, sections 1.8, 2.5.4.2, 2.6
|
ANSI/ASHRAE 41.6–1994 (reaffirmed 2001), Standard Method for Measurement of Moist Air Properties
|
430.22
Part 430, Appendix M, Subpart B, sections 1.9, 2.5.6
|
ANSI/ASHRAE 41.9–2000, Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants
|
430.22
Part 430, Appendix M, Subpart B, sections 1.10, 3.11.2
|
ANSI/ASHRAE 116–1995, Methods of Testing for Rating Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps
|
430.22
Part 430, Appendix M, Subpart B, Sections 1.12, 2.6
|
American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
1791 Tullie Circle, NE, Atlanta, Georgia 30329
| Publication |
CFR Reference |
ASHRAE Standard 16–69 Method of Testing for Rating Room Air Conditioners
|
Part 430, Subpart B, Appendix F
|
ASHRAE 103–1993, Methods of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers (with Errata of October 24, 1996) except for Sections 3.0, second paragraph of section 7.2.2.2, 7.2.2.5, 8.6.1.1, 9.1.2.2, 9.5.1.1, 9.5.1.2.1, 9.5.1.2.2, 9.5.2.1, 9.7.1, 10.0, 11.2.12, 11.3.12, 11.4.12, 11.5.12, and Appendices B and C
|
Part 430, Subpart B, Appendix N
|
American Society of Mechanical Engineers (ASME)
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
| Publication |
CFR Reference |
ASME/ANSI Standard A112.18.1M–1996, Plumbing Fixture Fittings
|
430.22(b)(6)
|
ASME/ANSI Standard A112.19.6–1995, Hydraulic Requirements for Water Closets and Urinals
|
430.22(b)(6)
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959, Telephone (610) 832–9585
| Publication |
CFR Reference |
ASTM D 396–78 Standard Specification for Fuel Oils
|
430.2
|
ASTM D 2156–65 (1975) Method of Test for Smoke Density in Flue Gases from Distillate Fuels (ANSI Z 11.182–1965 (R 1971))
|
Part 430, Subpart B, Appendix N and O
|
Association of Home Appliance Manufacturers
1111 19th Street, NW, Suite 402, Washington, DC 20036 PHONE: 202-872-5955
| Publication |
CFR Reference |
AHAM HLD–1, June 1974 Performance Evaluation Procedure for Household Tumble Type Clothes Dryers
|
Part 430, Subpart B, Appendix O
|
AHAM HLD–2EC, Dec. 1975 Test Method for Measuring Energy Consumption of Household Tumble Type Clothes Dryers
|
Part 430, Subpart B, Appendix D
|
AHAM HLW–2EC, Dec. 1975 Test Method for Measuring Energy Consumption of Household Clothes Washers
|
Part 430, Subpart B, Appendix J
|
AHAM HLW–1, Dec. 1971 Household Washer Performance Evaluation Procedure. (ANSI Z 224.1–1971)
|
Part 430, Subpart B, Appendix J
|
AHAM HRF–2–ECFT–1975 Test Procedures to Determine the Temperature and Energy Consumption of Household Refrigerators, Combination Refrigerator–Freezers, and Freezers
|
Part 430, Subpart B, Appendix A and B
|
AHAM HU–1–72, Appliance Humidifier Standard (ANSI Z 235.1–1972)
|
Part 430, Subpart B, Appendix K2
|
ANSI/AHAM DW–1–1992, American National Standard Household Electric Dishwashers
|
430.22(b)(7)
430 Subpart B, Appendix C, Section 1.2, Sections 1.8 through 1.11
Section 1.13
Section 2.6.3.1(A)
Section 2.6.3.1(B)
Section 2.6.3.2(A)
Section 2.6.3.2(B)
Section 2.6.3.3(A)
Section 2.6.3.3(B)
Section 2.8
430 Subpart C, Section 430.32 (f)
|
California Energy Commission
1516 Ninth Street, MS-25, Sacramento, California 95814
| Publication |
CFR Reference |
CEC Test Method for Calculating the Energy Efficiency of Single-Voltage External AC-DC AC-AC Power Supplies, August 11, 2004
|
430.22
Part 430, Subpart B, Appendix Z, sections 3 and 4
|
U.S. Department of Energy
1000 Independence Avenue SW, Forrestal Building, Washington DC, 20585
| Publication |
CFR Reference |
Energy Star Program Requirements for Compact Fluorescent Lamps, August 9, 2001
|
430.22
Part 430, Subpart B, Appendix W
|
Energy Star Program Requirements for [Compact Fluorescent Lamps] CFLs, October 30, 2003, Version 3.0
|
430.22
Part 430, Subpart B, Appendix V, Sections 3(a) and 4(a)
|
Energy Star Program Requirements for Dehumidifiers, January 2001
|
430.22
Part 430, Subpart B, Appendix X, Sections 3 and 4
|
Energy Star Program Requirements for Residential Light Fixtures, Version 4.0, January 2005
|
430.22
Part 430, Subpart B, Appendix V, Sections 3 and 4
|
Energy Star Testing Facility Guidance Manual: Building a Testing Facility and Performing the Solid State Test Method for ENERGY STAR Qualified Ceiling Fans, Version 1.1, December 2002
|
430.22
Part 430, Subpart B, Appendix U, Sections 3 and 4
|
Test Methodology for Determining the Energy Performance of Battery Charging Systems, December 2005
|
430.22
Part 430, Subpart B, Appendix Y, Sections 3 and 4
|
Hydronics Institute Division of GAMA
P.O. Box 218, Berkeley Heights, NJ 07922
Illuminating Engineering Society of North America, Publications Department
345 E. 47th Street, New York, NY 10017, (212) 705–7925
| Publication |
CFR Reference |
Illuminating Engineering Society of North America Lighting Handbook, Reference and Application, 8th Edition, 1993, Chapter 6, Light Sources
|
430.22
|
IES LM–9–88, IES Approved Method for the Electrical and Photometric Measurements of Fluorescent Lamps
|
430.22, Subpart B, Appendix R
|
IES, LM–16, –84, IES Pratical Guide to Colorimetry of Light Sources
|
430.22, Subpart B, Appendix R
|
IESNA LM–16–1993m IESNA Practical Guide to Colorimetry of Light Sources
|
430.22
|
IES LM–20–1982, IES Approved Method for Photometric Measuring and Reporting Tests on Reflector Type Lamps
|
430.22, Subpart B, Appendix R
|
IESNA LM–20–1994, IESNA Approved Method for Photometric Testing of Reflector–Type Lamps
|
430.22
|
IES LM–45–91, IES Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps
|
430.22, Subpart B, Appendix R
|
IES LM–58–83, IES Guide to Spectroradiometric Measurements
|
430.22, Subpart B, Appendix R
|
IESNA LM–58–1994, IESNA Guide to Spectroradiometric Measurements
|
430.22
|
IES LM–66–1991, IES Approved Method for the Electrical and Photometric Merasurements of Single–Ended Compact Fluorescent Lamps
|
430.22, Subpart B, Appendix R
|
International Commission on Illumination
Bureau Central De La CIE, 4 AV. Du Recteur–Poincare, 75 782 Paris, Cedex 16, France
| Publication |
CFR Reference |
International Commission on Illumination Publication No. 13.2, 1974, corrected reprint 1993, Method of Measuring and Specifying Color Rendering Properties of Light Sources, ISBN 3 900 734 39 9
|
430.22, Subpart B, Appendix R
|
International Electrotechnical Commission
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112-5776
| Publication |
CFR Reference |
IEC Standard 705, Methods for Measuring the Performance of Microwave Ovens for Household and Similar Purposes, Section 4, Methods of Measurement, Paragraph 13 Electrical Power Input Measurement and Paragraph 14 Efficiency (1988)
|
430.22
|
IEC Standard 705, Amendment 2, Methods for Measuring the Performance of Microwave Ovens for Household and Similar Purposes, Section 4, Methods of Measurement, Paragraph 12 Microwave Power Output Measurement (1993)
|
430.22
|
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
Air–Conditioning and Refrigeration Institute
4100 North Fairfax Drive, Suite 200, Arlington, VA 22203; PHONE: 703-524-8800; FAX: 703-528-3816; Internet: http://www.ari.org/std/standards.html
| Publication |
CFR Reference |
ARI Standard 210/240–2003, Unitary Air–Conditioning and Air–Source Heat Pump Equipment
|
431.95
431.96(b)
|
ARI 310/380–2004, CSA-C744-04: Standard for Packaged Terminal Air–Conditioners and Heat Pumps
|
431.95
431.96(b)
|
ARI Standard 340/360–2004, Performance Rating of Commercial and Industrial Unitary Air–Conditioning and Heat Pump Equipment
|
431.95, 431.96(b)
|
ARI 810–2003, Performance Rating of Automatic Commercial Ice Makers
|
431.133, 431.134
|
ARI 1200–2006, Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets
|
431.63, 431.64
|
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
| Publication |
CFR Reference |
ANSI Z21.10.3–1998/CSA 4.3-M98, Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous
|
431.105
|
ANSI Z21.10.3a–2000/CSA 4.3a-M00, Addenda to Z21.10.3-1998/CSA 4.3-M98: Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous
|
431.105
|
ANSI Z21.47–1998 Gas-Fired Central Furnaces
|
431.75
431.76
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959, Telephone (610) 832–9585
| Publication |
CFR Reference |
ASTM F 2324–03 Standard Test Method for Prerinse Spray Valves
|
431.263
431.264
|
American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
1791 Tullie Circle, NE, Atlanta, Georgia 30329
| Publication |
CFR Reference |
ANSI/ASHRAE Standard 29–1988 (Reaffirmed 2005) Methods of Testing Automatic Ice Makers
|
431.64
431.134
|
ANSI/ASHRAE Standard 32.1–2004 Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages
|
431.293
431.294
|
ASHRAE Standard 103–1993 Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers
|
431.75
431.76
|
American Society of Mechanical Engineers (ASME)
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
| Publication |
CFR Reference |
ASME PTC 4.1: Power Test Codes for Steam-Generating Units, 1964, reaffirmed 1991 (including 1968 and 1969 addenda)
|
431.85
431.86
|
Association of Home Appliance Manufacturers
1111 19th Street NW, Suite 402, Washington DC 20036
| Publication |
CFR Reference |
ANSI–AHAM HRF-1-2004: Energy, Performance and Capacity of Household Refrigerators, Refrigerator-Freezers, and Freezers
|
431.64
431.294
|
CSA International
5060 Spectrum Way, Mississauga, Ontario, Canada L4W5N6
U.S. Environmental Protection Agency
Ariel Rios Building, 1200 Pennsylvania Avenue NW, Washington DC 20460
| Publication |
CFR Reference |
Energy Star Program Requirements for Exit Signs, Version 2.0, 2001
|
431.203
431.204
|
Energy Star Program Requirements for Traffic Signals, 2003, Version 1.1
|
431.223
431.224
|
Hydronics Institute Division of GAMA
P.O. Box 218, Berkeley Heights, NJ 07922
| Publication |
CFR Reference |
HI BTS-2000, Hydronics Institute (HI) Division of GAMA Boiler Testing Standard BTS-2000, “Method to Determine Efficiency of Commercial Space Heating Boilers,” published January 2001
|
431.75
431.76
431.85
431.86
|
Institute of Electrical and Electronics Engineers
445 Hoes Lane, P.O. Box 1331, Piscataway, New Jersey 08855-1331
Institute of Transportation Engineers (ITE)
1099 14th Street NW, Suite 300 West, Washington DC 20005-3438
| Publication |
CFR Reference |
Institute of Transportation Engineers Vehicle Traffic Control Signal Heads: Light Emitting Diode (LED) Circular Signal Supplement , June 27, 2005
|
431.224
|
International Electrotechnical Commission
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112-5776
| Publication |
CFR Reference |
IEC Standard 60034-1 with Amendment 1, Rotating Electrical Machines, Part 1: Rating and Performance, dated 1996, with Amendment 1, dated 1997
|
431.12
431.15
|
IEC Standard 60034-12, Rotating Electrical Machines, Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for Voltages Up to and Including 660V, with Amendment 1 (1992) and Amendment 2 (1995)
|
431.12
431.15
|
IEC Standard 60050-411, International Electrotechnical Vocabulary, Chapter 411: Rotating Machines, 1996
|
431.12
431.15
|
IEC Standard 60072-1, Dimensions and Output Series for Rotating Electrical Machines—Part 1: Frame Numbers 56 to 400 and Flange Numbers 55 to 1080, 1991
|
431.1
431.12
431.15
|
International Organization for Standardization (ISO)
International Organization for Standardization, Case Postale 56, CH-1211, Geneva 20, Switzerland. Also available from the American National Standards Institute, 25 West 43rd Street, New York, New York 10036
| Publication |
CFR Reference |
ISO 13256-1, Water-Source Heat Pumps—Testing and Rating for Performance—Part 1: Water-to-Air and Brine-to-Air Heat Pumps, 1998
|
431.95, 431.96(b)
|
National Electrical Manufacturers Association
Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112-5776
| Publication |
CFR Reference |
MG1–1993 “Motors and Generators” Section I, Part 1, Paragraphs 1.16.1, 1.16.1.1, 1.17.1, 1.17.1.2, and 1.40.1; Part 4, Paragraph 4.01, and Figures 4–1, 4–2, 4–3, and 4–4; and Section II, Part 11, Paragraphs 11.01.2, 11.31 (except the lines for frames 447T, 447TS, 449T, and 449TS), 11.32, 11.34 (except the line for frames 447TC and 449TC, and the line for frames 447TSC and 449TSC), 11.35, and 11.36 (except the line for frames 447TD and 449TD, and the line for frames 447TSD and 449TSD; and Table 11–1; Part 12, Paragraphs 12.35.1, 12.35.5, 12.38.1, 12.39.1, 12.40.1, 12.58.1, and Tables 12–2 and 12–8; and Part 14, Paragraphs 14.02 and 14.03) with Revisions 1, 2, 3, and 4
|
431.22
|
MG1-1993, “Motors and Generators,” with Revisions 1,2,3 and 4
|
Part 431, Subpart B, Appendix B
431.12
431.15
431.31
|
MG1–1993 “Motors and Generators” Section I, Part 1, Paragraphs 1.16.1, 1.16.1.1, 1.17.1.1, 1.17.1.2, and 1.40.1
|
431.12
431.15
|
MG1–1993 “Motors and Generators” Section 1, Part 4, Paragraph 4.01, and Figures 4–1, 4–2, 4–3, and 4–4
|
431.12
431.15
|
MG1–1993 “Motors and Generators” Section II, Part 11, Paragraphs 11.01.2, 11.31 (except the lines for frames 447T, 447TS, 449T, and 449TS), 11.32, 11.34 (except the line for frames 447TC and 449TC, and the line for frames 447TSC and 449TSC), 11.35, and 11.36 (except the line for frames 447TD and 449TD, and the line for frames 447TSD and 449TSD; and Table 11–1
|
431.12
431.15
|
MG1–1993 “Motors and Generators” Section II, Part 12, Paragraphs 12.35.1, 12.35.5, 12.38.1, 12.39.1, 12.40.1, 12.58.1, and Tables 12–2 and 12–8
|
431.12
431.15
|
MG1–1993 “Motors and Generators” Section II, Part 14, Paragraphs 14.02 and 14.03)
|
431.12
431.15
|
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
| Publication |
CFR Reference |
U.L. 727-1994, Standard for Safety: Oil-Fired Central Furnaces
|
431.75
431.76
|
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
| Publication |
CFR Reference |
ANSI/ASHRAE/IESNA Standard 90.1: Energy Standard for Buildings except Low-Rise Residential Buildings, 2004
|
433.2
433.3
433.4(a)
433.5(a)
|
Air–Conditioning and Refrigeration Institute
4100 North Fairfax Drive, Suite 200, Arlington, VA 22203; PHONE: 703-524-8800; FAX: 703-528-3816
| Publication |
CFR Reference |
ARI Standard 210/240–94, Unitary Air–Conditioning and Air–Source Heat Pump Equipment, 1994
|
434.701
|
ARI 310/380–93, Packaged Terminal Air–Conditioners and Heat Pumps (1993 Edition)
|
434.701
|
ARI Standard 320–93, Water–Source Heat Pumps
|
434.701
|
ARI Standard 325–93, Ground Water–Source Heat Pumps
|
434.701
|
ARI Standard 330–93, Ground–Source Closed–Loop Heat Pumps
|
434.701
|
ARI Standard 340/360–93, Commercial and Industrial Unitary Air–Conditioning and Heat Pump Equipment (1993 Edition)
|
434.701
|
ARI Standard 365–94, Commercial and Industrial Unitary Air–Conditioning Condensing Units
|
434.701
|
ARI Standard 550–92, Centrifugal and Rotary Screw Water–Chilling Packages
|
434.701
|
ARI Standard 560–92, Absorption Water Chilling and Water Heating Packages
|
434.701
|
ARI Standard 590–92, Positive Displacement Compressor Water–Chilling Packages
|
434.701
|
American Architectural Manufacturers Association (AAMA)
1827 Walden Office Square, Suite 104, Schaumburg, IL 60173–4628
| Publication |
CFR Reference |
ANSI/AAMA/NWWDA 101/I.S.2–97, Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors
|
434.701
|
American Gas Association
1515 Wilson Blvd., Arlington, VA 22209; (703) 841–8400
| Publication |
CFR Reference |
Z21.47-1993, Gas-Fired Central Furnaces, including addenda Z21.47a-1995
|
434.701
|
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
| Publication |
CFR Reference |
ANSI Z21.10.3–1993, Gas Water Heaters, Volume III, Storage with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous Water Heaters
|
434.701
|
ANSI Z21.13–1991, including addenda Gas–Fired Low–Pressure Steam and Hot Water Boilers, Addenda Z21.13a–1993 and Z21–13b–1994
|
434.701
|
ANSI Z21.56–1994, Gas–Fired Pool Heaters; including Addenda Z21.56a–1996
|
434.701
|
ANSI Z21.66–1996, Automatic Vent Damper Devices for Use with Gas–Fired Appliances
|
434.701
|
ANSI Z83.8–96, Gas Unit Heater and Gas–Fired Duct Furnaces
|
434.701
|
ANSI Z83.9–90, including addenda Z83.9a–1992, Gas–Fired Duct Furnaces, 1990. (Addendum 90.1b)
|
434.701
|
ANSI/U.L. 726, Oil–Fired Boiler Assemblies (7th Edition, 1995)
|
434.701
|
ANSI/AHAM RAC–1–1992, Room Air Conditioners (1982 Edition)
|
434.701
|
American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
1791 Tullie Circle, NE, Atlanta, Georgia 30329
| Publication |
CFR Reference |
ANSI/ASHRAE 55–1992 including addenda 55a–1995, Thermal Environmental Conditions for Human Occupancy
|
434.701
|
ASHRAE Standard 62–1989, Ventilation for Acceptable
Indoor Air Quality
|
434.701
|
ASHRAE/IESNA 90.1–1989, Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings, including Addenda 90.16–1992, 90.1d–1992, 90.1e–1992. 90.1g–1993, 90.1i–1993; 90.1m–1995, 90.1n–1997
|
434.301.1
434.402.1.2.4
434.402.4.2
434.403.2.1
434.701
|
ASHRAE, Handbook, HVAC Applications (I–P Edition, 1995)
|
434.701
|
ASHRAE, Handbook, 1993 Fundamentals Volume
|
434.701
|
American Society for Testing and Materials (ASTM)
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
| Publication |
CFR Reference |
ASTM C 177–85 (Reapproved 1993), Test Method for Steady–State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded–Hot–Plate Apparatus
|
434.701
|
ASTM C 236–89 (Reapproved 1993), Test Method for Steady–State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box
|
434.701
|
ASTM C 518–91, Test Method for Steady–State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
|
434.701
|
ASTM C 976–90, Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box
|
434.701
|
ASTM D 4099–95, Standard Specification for Poly (Vinyl Chloride) (PVC) Prime Windows/Sliding Glass Doors
|
434.701
|
ASTM E 283–91, Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Difference Across the Specimen
|
434.701
|
Cooling Tower Institute
P.O. Box 73383, Houston, TX 77273
| Publication |
CFR Reference |
CTI Standard–201, Standard for the Certification of Water–Cooling Towers Thermal Performance, November 1996
|
434.701
|
Lund Institute of Technology
Lund, Sweden
| Publication |
CFR Reference |
Report TVAHB–3007, 1981, “Thermal Bridges in Sheet Metal Construction” by Gudni Johannesson
|
434.701
|
National Electrical Manufacturers Association
Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112-5776
| Publication |
CFR Reference |
NEMA MG1-1993, “Motors and Generators,” Revision No. 1, December 7, 1993
|
434.701
|
NEMA MG 10-1994, Energy Management Guide for Selection and Use of Polyphase Motors
|
434.701
|
NEMA MG 11-1977 (Revised 1982, 1987), Energy Management Guide for Selection and Use of Single-Phase Motors
|
434.701
|
National Fenestration Rating Council, Inc.
1300 Spring Street, Suite 500, Silver Spring, MD 20910
| Publication |
CFR Reference |
NFRC 100-97, Procedure for Determining Fenestration Product Thermal Properties
|
434.701
|
NFRC 200 - Procedure for Determining Fenestration Product Solar Heat Gain Coefficients at Normal Incidence (1995)
|
434.701
|
National Wood Window and Door Association (formerly the National Woodwork Manufacturers Association)
1400 East Toughy Avenue, Suite 470, Des Plaines, IL 60018
| Publication |
CFR Reference |
ANSI/AAMA/NWWDA 101/I.S.2–97, Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors
|
434.701
|
ANSI/NWWDA I.S.3-95, Wood Sliding Patio Doors
|
434.701
|
Sheet Metal and Air-Conditioning Contractors' National Association, Inc.
4201 Lafayette Center Drive, Chantilly, VA 20151
| Publication |
CFR Reference |
HVAC Duct Construction Standards--Metal and Flexible (2nd Edition, 1995)
|
434.701
|
HVAC Air Duct Leakage Test Manual (1st Edition, 1985)
|
434.701
|
Fibrous Glass Duct Construction Standards (6th Edition, 1992)
|
434.701
|
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
| Publication |
CFR Reference |
ANSI/UL 726, Oil–Fired Boiler Assemblies (7th Edition, 1995)
|
434.701
|
U.L. 727, including addendum dated January 30, 1996, Oil-Fired Central Furnaces (8th Edition, 1994)
|
434.701
|
UL 731, Oil–Fired Unit Heaters (5th Edition, 1995)
|
434.701
|
International Code Council
4051 West Flossmoor Road, Country Club Hills, IL 60478-5795
| Publication |
CFR Reference |
ICC International Energy Conservation Code, 2004 Supplement Edition, January 2005
|
435.2
435.3
435.4(a)
435.5
|
Standard 93–77 Methods of Testing to Determine the Thermal Performance of Solar Collectors
|
436.76
|
Air Conditioning and Refrigeration Institute
4301 North Fairfax Drive, Suite 425, Arlington, VA 22203; PHONE: 703-524-8800; FAX: 703-528-3816
American National Standards Institute/American Architectural Manufacturers Association
1540 East Dundee Road, Palatine, IL 60067; (708) 202–1350
American Gas Association
1515 Wilson Blvd., Arlington, VA 22209; (703) 841–8400
| Publication |
CFR Reference |
AGA No. 1–80, Requirements for Heat Reclaimer Devices for Use with Gas-Fired Appliances, June 1, 1980
|
Part 440, Appendix A
|
American National Standards Institute, Inc.
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
| Publication |
CFR Reference |
ANSI Z21.8–1984
|
Part 440, Appendix A
|
ANSI Z21.17–1984, and Z21.17a–1990
|
Part 440, Appendix A
|
ANSI Z21.21–1987 and Z21.21a–1989
|
Part 440, Appendix A
|
ANSI Z21.47–1987, Z21.47a–1988 and Z21.47b–1989
|
Part 440, Appendix A
|
ANSI Z21.66–1988, including Exhibits A & B
|
Part 440, Appendix A
|
ANSI Z21.71–1981, Z21.71a1985 and Z21.71b–1989
|
Part 440, Appendix A
|
ANSI Z223.1–1988
|
Part 440, Appendix A
|
ANSI Z223.1–1988, including Appendix H
|
Part 440, Appendix A
|
ANSI Z223.1–1988, including Part 9 and Appendices G & H
|
Part 440, Appendix A
|
ANSI Z223.1–1988, including Appendices H, I, J and K
|
Part 440, Appendix A
|
ANSI/American Home Appliance Manufacturers ANSI/AHAM RAC–1–1982
|
Part 440, Appendix A
|
American National Standards Institute/National Wood Window and Door Association
1400 East Touhy Avenue, Suite 470, Des Plaines, IL 60018; (847) 299–5200
American National Standards Institute/Steel Door Institute
712 Lakewood Center North, 14600 Detroit Avenue, Cleveland, OH 44107; (216) 899–0100
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, Telephone (610) 832-9585, FAX (610) 832-9555
| Publication |
CFR Reference |
ASTM C208–72 (1982)
|
Part 440, Appendix A
|
ASTM C509–84
|
Part 440, Appendix A
|
ASTM C516–80 (1990)
|
Part 440, Appendix A
|
ASTM C517–71 (1979)
|
Part 440, Appendix A
|
ASTM C533–85 (1990)
|
Part 440, Appendix A
|
ASTM C534–88
|
Part 440, Appendix A
|
ASTM C547–77
|
Part 440, Appendix A
|
ASTM C549–81 (1986)
|
Part 440, Appendix A
|
ASTM C552–88
|
Part 440, Appendix A
|
ASTM C553–70 (1977)
|
Part 440, Appendix A
|
ASTM C570–72 (1989)
|
Part 440, Appendix A
|
ASTM C578–87a
|
Part 440, Appendix A
|
ASTM C591–85
|
Part 440, Appendix A
|
ASTM C592–80
|
Part 440, Appendix A
|
ASTM C610–85
|
Part 440, Appendix A
|
ASTM C612–83
|
Part 440, Appendix A
|
ASTM C665–88
|
Part 440, Appendix A
|
ASTM C669–75 (1989)
|
Part 440, Appendix A
|
ASTM C720–89
|
Part 440, Appendix A
|
ASTM C726–88
|
Part 440, Appendix A
|
ASTM C728–89a
|
Part 440, Appendix A
|
ASTM C739–88
|
Part 440, Appendix A
|
ASTM C755–85 (1990)
|
Part 440, Appendix A
|
ASTM C764–88
|
Part 440, Appendix A
|
ASTM C834–76 (1986)
|
Part 440, Appendix A
|
ASTM C892–89
|
Part 440, Appendix A
|
ASTM C920–87
|
Part 440, Appendix A
|
ASTM C971–82
|
Part 440, Appendix A
|
ASTM C984–83
|
Part 440, Appendix A
|
ASTM D3678–88
|
Part 440, Appendix A
|
ASTM D4099–89
|
Part 440, Appendix A
|
ASTM E84–89a
|
Part 440, Appendix A
|
ASTM E96–90
|
Part 440, Appendix A
|
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
Federal Specifications, General Services Administration
Specification Section, Room 6654, 7th and D Streets, SW, Washington, DC 20407; (202) 708–5082
| Publication |
CFR Reference |
FS HH–I–1972/1, August 12, 1981
|
Part 440, Appendix A
|
FS HH–I–1972/2, August 12, 1981 and Amendment 1, October 3, 1985
|
Part 440, Appendix A
|
FS HH–I–1972/4, August 12, 1981
|
Part 440, Appendix A
|
FS HH–I–558C, January 7, 1992
|
Part 440, Appendix A
|
FS TT–P–00791B, October 16, 1969 and Amendment 2, March 23, 1971
|
Part 440, Appendix A
|
FS TT–S–001657, October 8, 1970
|
Part 440, Appendix A
|
FS TT–S–00230C, February 2, 1970 and Amendment 2, October 9, 1970
|
Part 440, Appendix A
|
National Electrical Manufacturers Association
Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112-5776
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 022697ndash;9101, Telephone: (800) 344-3555
Sheet Metal and Air Conditioning Contractors Association
P.O. Box 221230, Chantilly, VA 22022–1230; (703) 803–2980
| Publication |
CFR Reference |
SMACNA Energy Recovery Equipment and Systems, Air-to-Air (1978)
|
Part 440, Appendix A
|
Tubular Exchange Manufacturers Association
25 North Broadway, Tarrytown, NY 10591; (914) 332–0040
| Publication |
CFR Reference |
Standards of the Tubular Exchanger Manufactuers Association, Seventh Ed., 1988
|
Part 440, Appendix A
|
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
| Publication |
CFR Reference |
UL 17, November 28, 1988
|
Part 440, Appendix A
|
UL 296, February 28, 1989
|
Part 440, Appendix A
|
UL 507, August 23, 1990
|
Part 440, Appendix A
|
UL 727, August 27, 1991
|
Part 440, Appendix A
|
UL 1995, November 30, 1990
|
Part 440, Appendix A
|
Addresses
National Standards Association
|
1200 Quince Orchard Blvd., Gaithersburg, MD 20878; (301) 590–2300.
|