You are using an unsupported browser. This web site is designed for the current versions of Microsoft Edge, Google Chrome, Mozilla Firefox, or Safari.
The Office of the Federal Register publishes documents on behalf of Federal agencies but does not have any authority over their programs. We recommend you directly contact the agency associated with the content in question.
If you have comments or suggestions on how to improve the www.ecfr.gov website or have questions about using www.ecfr.gov, please choose the 'Website Feedback' button below.
If you would like to comment on the current content, please use the 'Content Feedback' button below for instructions on contacting the issuing agency
Enhanced content is provided to the user to provide additional context.
This content is from the eCFR and is authoritative but unofficial.
Navigate by entering citations or phrases (eg: 1 CFR 1.1 49 CFR 172.101 Organization and Purpose 1/1.1 Regulation Y FAR).
Choosing an item from citations and headings will bring you directly to the content. Choosing an item from full text search results will bring you to those results. Pressing enter in the search box will also bring you to search results.
Background and more details are available in the Search & Navigation guide.
The in-page Table of Contents is available only when multiple sections are being viewed.
Use the navigation links in the gray bar above to view the table of contents that this content belongs to.
49 U.S.C. 31136, 31151, 31502; sec. 1041(b), Pub. L. 102-240, 105 Stat. 1914, 1993; secs. 5301 and 5524, Pub. L. 114-94, 129 Stat. 1312, 1543, 1560; and 49 CFR 1.87.
33 FR 19735, Dec. 25, 1968, unless otherwise noted.
This content is from the eCFR and may include recent changes applied to the CFR. The official, published CFR, is updated annually and available below under "Published Edition". You can learn more about the process here.
Subscribe to: 49 CFR 393.47
View the most recent official publication:
These links go to the official, published CFR, which is updated annually. As a result, it may not include the most recent changes applied to the CFR. Learn more.
Information and documentation can be found in our developer resources.
The Code of Federal Regulations (CFR) is the official legal print publication containing the codification of the general and permanent rules published in the Federal Register by the departments and agencies of the Federal Government. The Electronic Code of Federal Regulations (eCFR) is a continuously updated online version of the CFR. It is not an official legal edition of the CFR.
Learn more about the eCFR, its status, and the editorial process.
Nomenclature changes to part 393 appear at 66 FR 49874, Oct. 1, 2001.
(a) General requirements. Brake components must be constructed, installed and maintained to prevent excessive fading and grabbing. The means of attachment and physical characteristics must provide for safe and reliable stopping of the commercial motor vehicle.
(b) Brake chambers. The service brake chambers and spring brake chambers on each end of an axle must be the same size.
(c) Slack adjusters. The effective length of the slack adjuster on each end of an axle must be the same.
(d) Linings and pads. The thickness of the brake linings or pads shall meet the applicable requirements of this paragraph—
(1) Steering axle brakes. The brake lining/pad thickness on the steering axle of a truck, truck-tractor or bus shall not be less than 4.8 mm (3⁄16 inch) at the shoe center for a shoe with a continuous strip of lining; less than 6.4 mm (1⁄4 inch) at the shoe center for a shoe with two pads; or worn to the wear indicator if the lining is so marked, for air drum brakes. The steering axle brake lining/pad thickness shall not be less than 3.2 mm (1⁄8 inch) for air disc brakes, or 1.6 mm (1⁄16 inch) or less for hydraulic disc, drum and electric brakes.
(2) Non-steering axle brakes. An air braked commercial motor vehicle shall not be operated with brake lining/pad thickness less than 6.4 mm (1⁄4 inch) or to the wear indicator if the lining is so marked (measured at the shoe center for drum brakes); or less than 3.2 mm (1⁄8 inch) for disc brakes. Hydraulic or electric braked commercial motor vehicles shall not be operated with a lining/pad thickness less than 1.6 mm (1⁄16 inch) (measured at the shoe center) for disc or drum brakes.
(e) Clamp, Bendix DD-3, bolt-type, and rotochamber brake actuator readjustment limits.
(1) The pushrod stroke must not be greater than the values specified in the following tables:
| Type | Outside diameter | Brake readjustment limit: standard stroke chamber | Brake readjustment limit: long stroke chamber |
|---|---|---|---|
| 6 | 4 1⁄2 in. (114 mm) | 1 1⁄4 in. (31.8 mm) | |
| 9 | 5 1⁄4 in. (133 mm) | 1 3⁄8 in. (34.9 mm) | |
| 12 | 5 11⁄16 in. (145 mm) | 1 3⁄8 in. (34.9 mm) | 1 3⁄4 in. (44.5 mm). |
| 16 | 6 3⁄8 in. (162 mm) | 1 3⁄4 in. (44.5 mm) | 2 in. (50.8 mm). |
| 20 | 6 25⁄32 in. (172 mm) | 1 3⁄4 in. (44.5 mm) | 2 in. (50.8 mm). 2 1⁄2 in. (63.5 mm). 1 |
| 24 | 7 7⁄32 in. (184 mm) | 1 3⁄4 in. (44.5 mm) | 2 in. (50.8 mm). 2 1⁄2 in. (63.5 mm). 2 |
| 30 | 8 3⁄32 in. (206 mm) | 2 in. (50.8 mm) | 2 1⁄2 in. (63.5 mm). |
| 36 | 9 in. (229 mm) | 21⁄2 in. (63.5 mm) | |
| 1 For type 20 chambers with a 3-inch (76 mm) rated stroke. | |||
| 2 For type 24 chambers with a 3-inch (76 mm) rated stroke. | |||
| Type | Outside diameter | Brake readjustment limit |
|---|---|---|
| 30 | 8 1⁄8 in. (206 mm) | 2 1⁄4 in. (57.2 mm). |
| Type | Outside diameter | Brake readjustment limit |
|---|---|---|
| A | 6 15⁄16 in. (176 mm) | 1 3⁄8 in. (34.9 mm). |
| B | 9 3⁄16 in. (234 mm) | 1 3⁄4 in. (44.5 mm). |
| C | 8 1⁄16 in. (205 mm) | 1 3⁄4 in. (44.5 mm). |
| D | 5 1⁄4 in. (133 mm) | 1 1⁄4 in. (31.8 mm). |
| E | 6 3⁄16 in. (157 mm) | 1 3⁄8 in. (34.9 mm). |
| F | 11 in. (279 mm) | 2 1⁄4 in. (57.2 mm). |
| G | 9 7⁄8 in. (251 mm) | 2 in. (50.8 mm). |
| Type | Outside diameter | Brake readjustment limit |
|---|---|---|
| 9 | 4 9⁄32 in. (109 mm) | 1 1⁄2 in. (38.1 mm). |
| 12 | 4 13⁄16 in. (122 mm) | 1 1⁄2 in. (38.1 mm). |
| 16 | 5 13⁄32 in. (138 mm) | 2 in. (50.8 mm). |
| 20 | 5 15⁄16 in. (151 mm) | 2 in. (50.8 mm). |
| 24 | 6 13⁄32 in. (163 mm) | 2 in. (50.8 mm). |
| 30 | 7 1⁄16 in. (180 mm) | 2 1⁄4 in. (57.2 mm). |
| 36 | 7 5⁄8 in. (194 mm) | 2 3⁄4 in. (69.9 mm). |
| 50 | 8 7⁄8 in. (226 mm) | 3 in. (76.2 mm). |
(2) For actuator types not listed in these tables, the pushrod stroke must not be greater than 80 percent of the rated stroke marked on the actuator by the actuator manufacturer, or greater than the readjustment limit marked on the actuator by the actuator manufacturer.
(f) Wedge brake adjustment. The movement of the scribe mark on the lining shall not exceed 1.6 mm (1⁄16 inch).
(g) Drums and rotors. The thickness of the drums or rotors shall not be less than the limits established by the brake drum or rotor manufacturer.
[70 FR 48051, Aug. 15, 2005, as amended at 77 FR 46638, Aug. 6, 2012; 86 FR 57076, Oct. 14, 2021]