Site Feedback

Title 49

Displaying title 49, up to date as of 1/07/2025. Title 49 was last amended 1/07/2025.
eCFR Content

The Code of Federal Regulations (CFR) is the official legal print publication containing the codification of the general and permanent rules published in the Federal Register by the departments and agencies of the Federal Government. The Electronic Code of Federal Regulations (eCFR) is a continuously updated online version of the CFR. It is not an official legal edition of the CFR.

Learn more about the eCFR, its status, and the editorial process.

Title 49TransportationPart / Section
Subtitle BOther Regulations Relating to Transportation100 – 1699
Chapter IPipeline and Hazardous Materials Safety Administration, Department of Transportation100 – 199
Subchapter DPipeline Safety186 – 199
Part 192Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards192.1 – 192.1015
Subpart AGeneral192.1 – 192.18
Subpart BMaterials192.51 – 192.69
Subpart CPipe Design192.101 – 192.127
Subpart DDesign of Pipeline Components192.141 – 192.205
Subpart EWelding of Steel in Pipelines192.221 – 192.245
Subpart FJoining of Materials Other Than by Welding192.271 – 192.287
Subpart GGeneral Construction Requirements for Transmission Lines and Mains192.301 – 192.329
Subpart HCustomer Meters, Service Regulators, and Service Lines192.351 – 192.385
Subpart IRequirements for Corrosion Control192.451 – 192.493
Subpart JTest Requirements192.501 – 192.517
Subpart KUprating192.551 – 192.557
Subpart LOperations192.601 – 192.636
Subpart MMaintenance192.701 – 192.756
Subpart NQualification of Pipeline Personnel192.801 – 192.809
Subpart OGas Transmission Pipeline Integrity Management192.901 – 192.951
Subpart PGas Distribution Pipeline Integrity Management (IM)192.1001 – 192.1015
Appendix A to Part 192 [Reserved]
Appendix B to Part 192
Qualification of Pipe and Components
Appendix C to Part 192
Qualification of Welders for Low Stress Level Pipe
Appendix D to Part 192
Criteria for Cathodic Protection and Determination of Measurements
Appendix E to Part 192
Guidance on Determining High Consequence Areas and on Carrying out Requirements in the Integrity Management Rule
Appendix F to Part 192
Criteria for Conducting Integrity Assessments Using Guided Wave Ultrasonic Testing (GWUT)