Site Feedback

Title 49

Displaying title 49, up to date as of 11/12/2026. Title 49 was last amended 11/12/2026.
eCFR Content

The Code of Federal Regulations (CFR) is the official legal print publication containing the codification of the general and permanent rules published in the Federal Register by the departments and agencies of the Federal Government. The Electronic Code of Federal Regulations (eCFR) is a continuously updated online version of the CFR. It is not an official legal edition of the CFR.

Learn more about the eCFR, its status, and the editorial process.

§ 178.346-2 Material and thickness of material.

The type and thickness of material for DOT 406 specification cargo tanks must conform to § 178.345-2, but in no case may the thickness be less than that determined by the minimum thickness requirements in § 178.320(a). The following Tables I and II identify the specified minimum thickness values to be employed in that determination.

Table I—Specified Minimum Thickness of Heads (or Bulkheads and Baffles When Used as Tank Reinforcement) Using Mild Steel (MS), High Strength Low Alloy Steel (HSLA), Austenitic Stainless Steel (SS), or Aluminum (AL)—Expressed in Decimals of an Inch After Forming

Material Volume capacity in gallons per inch of length
14 or less Over 14 to 23 Over 23
MS HSLA SS AL MS HSLA SS AL MS HSLA SS AL
Thickness .100 .100 .160 .115 .115 .173 .129 .129 .187

Table II—Specified Minimum Thickness of Shell Using Mild Steel (MS), High Strength Low Alloy Steel (HSLA), Austenitic Stainless Steel (SS), or Aluminum (AL)—Expressed in Decimals of an Inch After Forming 1

Cargo tank motor vehicle rated capacity (gallons) MS SS/HSLA AL
More than 0 to at least 4,500 0.100 0.100 0.151
More than 4,500 to at least 8,000 0.115 0.100 0.160
More than 8,000 to at least 14,000 0.129 0.129 0.173
More than 14,000 0.143 0.143 0.187
1 Maximum distance between bulkheads, baffles, or ring stiffeners shall not exceed 60 inches.

[Amdt. 178-89, 54 FR 25028, June 12, 1989, as amended at 55 FR 37064, Sept. 7, 1990; Amdt. 178-105, 59 FR 55176, Nov. 3, 1994; 68 FR 19285, Apr. 18, 2003]