Site Feedback

Title 48

Displaying title 48, up to date as of 10/09/2026. Title 48 was last amended 10/09/2026.
New Finding Aids are now available on eCFR.gov. The Parallel Table of Authorities, Subject Index, and Agency-prepared Indexes are now online! Learn more
eCFR Content

The Code of Federal Regulations (CFR) is the official legal print publication containing the codification of the general and permanent rules published in the Federal Register by the departments and agencies of the Federal Government. The Electronic Code of Federal Regulations (eCFR) is a continuously updated online version of the CFR. It is not an official legal edition of the CFR.

Learn more about the eCFR, its status, and the editorial process.

Subpart 225.71—Other Restrictions on Foreign Acquisition

Source:

68 FR 15631, Mar. 31, 2003, unless otherwise noted.

225.7100 Scope of subpart.

This subpart contains foreign product restrictions that are based on policies designed to protect the defense industrial base.

225.7101 Definitions.

“Component” and “domestic manufacture,” as used in this subpart, are defined in the clause at 252.225-7025, Restriction on Acquisition of Forgings.

[74 FR 68384, Dec. 24, 2009]

225.7102 Forgings.

225.7102-1 Policy.

When acquiring the following forging items, whether as end items or components, acquire items that are of domestic manufacture to the maximum extent practicable:

Items Categories
Ship propulsion shafts Excludes service and landing craft shafts.
Periscope tubes All.
Ring forgings for bull gears All greater than 120 inches in diameter.

225.7102-2 Exceptions.

The policy in 225.7102-1 does not apply to acquisitions—

(a) Using simplified acquisition procedures, unless the restricted item is the end item being purchased;

(b) Overseas for overseas use; or

(c) When the quantity acquired exceeds the amount needed to maintain the U.S. defense mobilization base (provided the excess quantity is an economical purchase quantity). The requirement for domestic manufacture does not apply to the quantity above that required to maintain the base, in which case, qualifying country sources may compete.

225.7102-3 Waiver.

Upon request from a contractor, the contracting officer may waive the requirement for domestic manufacture of the items listed in 225.7102-1.

225.7102-4 Contract clause.

Use the clause at 252.225-7025, Restriction on Acquisition of Forgings, in solicitations and contracts, unless—

(a) The supplies being acquired do not contain any of the items listed in 225.7102-1; or

(b) An exception in 225.7102-2 applies. If an exception applies to only a portion of the acquisition, specify the excepted portion in the solicitation and contract.