You are using an unsupported browser. This web site is designed for the current versions of Microsoft Edge, Google Chrome, Mozilla Firefox, or Safari.
The Office of the Federal Register publishes documents on behalf of Federal agencies but does not have any authority over their programs. We recommend you directly contact the agency associated with the content in question.
If you have comments or suggestions on how to improve the www.ecfr.gov website or have questions about using www.ecfr.gov, please choose the 'Website Feedback' button below.
If you would like to comment on the current content, please use the 'Content Feedback' button below for instructions on contacting the issuing agency
Enhanced content is provided to the user to provide additional context.
This content is from the eCFR and is authoritative but unofficial.
Navigate by entering citations or phrases (eg: 1 CFR 1.1 49 CFR 172.101 Organization and Purpose 1/1.1 Regulation Y FAR).
Choosing an item from citations and headings will bring you directly to the content. Choosing an item from full text search results will bring you to those results. Pressing enter in the search box will also bring you to search results.
Background and more details are available in the Search & Navigation guide.
| Primary Lifesaving Equipment | 169.513 – 169.521 | ||||||||||||||||
| |||||||||||||||||
33 U.S.C. 1321(j); 46 U.S.C. 3306, 6101; Pub. L. 103-206, 107 Stat. 2439; E.O. 11735, 38 FR 21243, 3 CFR, 1971-1975 Comp., p. 793; DHS Delegation 00170.1, Revision No. 01.4; § 169.117 also issued under the authority of 44 U.S.C. 3507.
CGD 83-005, 51 FR 896, Jan. 9, 1986, unless otherwise noted.
This content is from the eCFR and may include recent changes applied to the CFR. The official, published CFR, is updated annually and available below under "Published Edition". You can learn more about the process here.
Subscribe to: 46 CFR Part 169 Subpart 169.500 - Primary Lifesaving Equipment
No changes found for this content after 1/03/2017.
View the most recent official publication:
These links go to the official, published CFR, which is updated annually. As a result, it may not include the most recent changes applied to the CFR. Learn more.
Information and documentation can be found in our developer resources.
The Code of Federal Regulations (CFR) is the official legal print publication containing the codification of the general and permanent rules published in the Federal Register by the departments and agencies of the Federal Government. The Electronic Code of Federal Regulations (eCFR) is a continuously updated online version of the CFR. It is not an official legal edition of the CFR.
Learn more about the eCFR, its status, and the editorial process.
(a) Lifeboats. Each lifeboat must be of a type approved under subpart 160.035 of this chapter. Installation and arrangement of each lifeboat including davits and winches must meet the requirements of part 94 of this chapter.
(b) Inflatable liferafts.
(1) Each inflatable liferaft must be a SOLAS A inflatable liferaft approved under part 160, subpart 160.151, of this chapter, except that inflatable liferafts on vessels operating on protected or partially protected waters may be SOLAS B inflatable liferafts approved under part 160, subpart 160.151, of this chapter.
(2) Each approved inflatable liferaft on the vessel on September 30, 2002, may be used to meet the requirements of this part as long as it is continued in use on the vessel, and is in good and serviceable condition.
(c) Life floats. Each lifefloat must be of a type approved under subpart 160.027 of this subchapter.
[CGD 83-005, 51 FR 896, Jan. 9, 1986, as amended by USCG-2001-11118, 67 FR 58541, Sept. 17, 2002]
(a) Except as provided in paragraph (c) of this section, each vessel must have sufficient lifeboats or inflatable liferafts to accommodate all persons on board .
(b) Each vessel certificated for exposed waters must have additional inflatable liferafts to accommodate 25% of the persons on board or the number of persons accommodated in the largest lifeboat or liferaft, whichever is greater.
(c) Vessels certificated for protected waters only may carry lifefloats of a combined capacity to accommodate all persons on board in lieu of the lifeboats and inflatable liferafts required in paragraph (a) of this section.
All vessels certificated for exposed or partially protected waters service must have a suitable motor rescue boat, except when a motor lifeboat is provided or when, in the opinion of the Officer in Charge, Marine Inspection, the vessel is of such design and operating characteristics that the vessel itself provides a satisfactory man overboard rescue platform.
(a) Each lifeboat, inflatable liferaft, and lifefloat must be kept in good working order and be readily available.
(b) The decks on which lifeboats, liferafts, and lifefloats are carried must be kept clear of obstructions which could interfere with the immediate boarding and launching of the lifesaving appliances.
(a) General. Each lifeboat, inflatable liferaft, and lifefloat must be stowed so that—
(1) It is capable of being launched within 10 minutes or, in the case of vessels having one compartment subdivision, 30 minutes;
(2) It does not impede the launching or handling of other lifesaving appliances;
(3) It does not impede the marshaling of persons at the embarkation stations, or their embarkation; and
(4) It is capable of being put in the water safely and rapidly even under unfavorable conditions of list and trim.
(b) Lifeboat stowage. Each lifeboat must be stowed to meet the following requirements:
(1) Each lifeboat must be attached to a separate set of davits.
(2) Lifeboats must not be stowed in the bow of the vessel nor so far aft as to be endangered by the propellers or overhang of the stern.
(3) Lifeboats must be stowed so that it is not necessary to lift them in order to swing out the davits.
(4) Means must be provided for bringing the lifeboats against the ship's side and holding them there so that persons may safely embark, unless the lifeboats are arranged for boarding at the stowage position.
(5) Lifeboats must be fitted with skates or other suitable means to facilitate launching against an adverse list of up to 15 degrees. However, skates may be dispensed with if, in the opinion of the Commandant, the arrangements ensure that the lifeboats can be satisfactorily launched without them.
(6) Means must be provided outside the machinery space to prevent the discharge of water into the lifeboats while they are being lowered.
(c) Inflatable liferaft stowage. Inflatable liferafts must be stowed so that they will float free in the event of the vessel sinking. Stowage and launching arrangements must be to the satisfaction of the Officer in Charge, Marine Inspection.
(d) Life float stowage. Each life float must be stowed to meet the requirements of this paragraph.
(1) Each life float must be secured to the vessel by a painter and a float-free link that is—
(i) Certified to meet subpart 160.073 of this chapter;
(ii) Of proper strength for the size of the life float as indicated on its identification tag; and
(iii) Secured to the painter at one end and secured to the vessel on the other end.
(2) The means by which the float-free link is attached to the vessel must—
(i) Have a breaking strength of at least the breaking strength of the painter.
(ii) If synthetic, be of a dark color or of a material certified to be resistant to deterioration from ultraviolet light; and
(iii) If metal, be corrosion resistant.
(3) If the life float does not have a painter attachment fitting, a means for attaching the painter must be provided by a wire or line that—
(i) Encircles the body of the device;
(ii) Will not slip off;
(iii) Has a breaking strength that is at least the breaking strength of the painter; and
(iv) If synthetic, is of a dark color or is of a material certified to be resistant to deterioration from ultraviolet light.
(4) The float-free link described in paragraphs (d)(1) and (d)(2) of this section is not required if the vessel operates solely in waters that have a depth less than the length of the painter.
(5) If the vessel carries more than one life float, the life floats may be grouped and each group secured by a single painter, provided that—
(i) The combined weight of each group of life floats does not exceed 400 pounds;
(ii) Each life float is individually attached to the painter by a line that meets paragraphs (d)(2) and (d)(3) of this section and which is long enough so that each can float without contacting any other life float in the group; and
(iii) The strength of the float-free link and the strength of the painter under paragraphs (d)(1)(ii) and (d)(2) of this section is determined by the combined capacity of the group of life floats.
(6) Each life float, as stowed, must be capable of easy launching. Life floats weighing over 400 pounds must not require lifting before launching.
(7) Life floats must be secured to the vessel only by a painter and lashings that can be easily released or by hydraulic releases. They must not be stowed in more than four tiers. When stowed in tiers, the separate units must be kept apart by spacers.
(8) There must be means to prevent shifting.
(e) Hydraulic Releases. Each hydraulic release used in the installation of any inflatable liferaft or life float must meet subpart 160.062 of this chapter.