(a) The operator must estimate or measure all volumes of lost oil and gas, whether avoidably or unavoidably lost, from wells, facilities and equipment on a lease, unit PA, or communitized area and report those volumes under applicable ONRR reporting requirements.
(b) The operator may:
(1) Estimate or measure vented or flared gas in accordance with applicable rules, regulations, or orders of the appropriate State or tribal regulatory agency;
(2) Estimate the volume of the vented or flared gas based on the results of a regularly performed GOR test and measured values for the volumes of oil production and gas sales, to allow BLM to independently verify the volume, rate, and heating value of the flared gas; or
(3) Measure the volume of the flared gas.
(c) The BLM may require the installation of additional measurement equipment whenever it is determined that the existing methods are inadequate to meet the purposes of this subpart.
(d) The operator may combine gas from multiple leases, unit PAs, or communitized areas for the purpose of flaring or venting at a common point, but must use a method approved by the BLM to allocate the quantities of the vented or flared gas to each lease, unit PA, or communitized area.