Title 49–Transportation
Material Approved for Incorporation by Reference
The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html
49 CFR (PARTS 572–599)
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
All materials are available from the Office of Rulemaking, DOT–NHTSA, 400 7th St. SW., Washington, DC 20590 | 49 CFR
| American Association of Textile Chemists and Colorists
Post Office Box 886, Durham, NC
| American Society for Testing and Materials (ASTM)
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
| ASTM E 274–79 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full–Scale Tire | 575.104
| ASTM E 501–76 Standard Tire for Pavement Skid Resistance Tests | 575.104(f)(1)(ii) and (vii)
| ASTM F 377–74 Standard Method for Calibration of Braking Force for Testing of Pneumatic Tires | 575.104(f)(1)(v)
| General Motors Corporation
c/o Docket 74–14, Docket Section, National Highway Traffic Safety Administration, Room 5109, 400 Seventh Street SW., Washington, DC 20590
| The Anthropomorphic Test Dummy Parts List, dated December 15, 1987, and a Parts List Index, dated December 15, 1987 | 572.31(a)
| The Anthromorphic Test Dummy Parts List, dated April 22, 1986 | 572.31(a)
| The Anthromorphic Test Dummy Parts List, dated September 9, 1996 | 572.31(a)
| A listing of Optional Hybrid III Dummy Transducers, dated April 22, 1986 | 572.31(a)
| A General Motors Drawing Package identified by GM drawing No. 78051–218 revision R and subordinate drawings | 572.31(a)
| A General Motors Drawing Package identified by GM drawing No. 78051–218 revision S, “Hybrid III Anthromorphic Test Dummy”, dated May 20, 1978 | 572.31(a)
| GE Drawing No. 78051–218, Revision U, and subordinate drawings dated August 30, 1998 | 572.31; 572.34
| Drawing No. 78051–55, “Instrumentation Assembly – Pelvic Accelerometer”, dated August 2, 1979 | Part 572
| Drawing No. 78051–59, Revision G, Pelvic Assembly–Complete–Hybrid III, dated June 30, 1998 | 572.31
| Drawing No. 78051–60, Revision E, Pelvic Structure–Molded ASM–Hybrid III, dated June 30, 1998 | 572.31
| Drawing No. 78051–61, Revision T, “Head Assembly”, complete, dated May 20, 1978 | Part 572
| Drawing No. 78051–61X, Revision C, “Head Assembly”, complete, dated March 28, 1997 | Part 572, subpart M
| Drawing No. 78051–70 , Revision E, “Lower Torso Assembly”, complete, dated August 20, 1996 | Part 572
| Drawing No. 78051–70, Revision F, Lower Torso Assembly–Complete–Hybrid III, dated June 30, 1998 | 572.31
| Drawing No. 78051–89, Revision K, “Upper Torso Assembly”, complete, dated May 20, 1978 | Part 572
| Drawing No. 78051–90, Revision A, “Neck Assembly”, complete, dated May 20, 1978 | Part 572; part 572, subpart M
| Drawing No. 78051–123, Revision D, “Arm Assembly”, complete, dated May 20, 1978 | Part 572
| Drawing No. 78051–124, Revision D, “Arm Assembly”, complete, dated May 20, 1978 | Part 572
| Drawing number 78051–383X, Revision P, titled “Neck Transducer Structural Replacement”, dated November 1, 1995 | Part 572, subpart M
| Drawing 86–5001–001, Revision A, “Leg Assembly”, complete, dated March 26, 1996 | Part 572
| Drawing 86–5001–002, Revision A, “Leg Assembly”, complete, dated March 26, 1996 | Part 572
| A General Motors Drawing No. 78051–218, Revision T, “Hybrid III Anthromorphic Test Dummy”, dated May 20, 1978 | 572.31; 572.34
| Disassembly, Inspection, Assembly and Limbs Adjustment Procedures for the Hybrid III dummy, dated July 15, 1986 | 572.31(a)
| Disassembly, Inspection, Assembly and Limbs Adjustment Procedures for the Hybrid III dummy, dated September 1996 | 572.31(a)
| Disassembly, Inspection, Assembly and Limbs Adjustment Procedures for the Hybrid III dummy, dated April 1997 | 572.31(a)
| Sign Convention for the signal outputs of Hybrid III dummy transducers, dated July 15, 1986 | 572.31(a)
| Exterior Dimensions of the Hybrid III dummy, dated July 15, 1986 | 572.31(a)
| National Highway Traffic Safety Administration
Office of Vehicle Safety Standards, DOT–NHTSA, 400 7th St. SW., Washington, DC 20590
| Parts/Drawings List, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES2re), September 2006 | 572, Subpart U
| Parts/Drawings List, Part 572 Subpart V, SID–IIsD, September 2006 | 572, Subpart V
| Parts List and Drawings, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES–2re, Alpha Version), September 2006, consisting of:
| (i) Drawing No. 175–0000 ES–2re Dummy Assembly | 572, Subpart U
| (ii) Drawing No. 175–1000 Head Assembly | 572, Subpart U
| (iii) Drawing No. 175–2000, Neck Assembly Test/Cert | 572, Subpart U
| (iv) Drawing No. 175–3000, Shoulder Assembly | 572, Subpart U
| (v) Drawing No. 175–3500, Arm Assembly, Left | 572, Subpart U
| (vi) Drawing No. 175–3800, Arm Assembly, Right | 572, Subpart U
| (vii) Drawing No. 175–4000, Thorax Assembly with Rib Extensions | 572, Subpart U
| (viii) Drawing No. 175–5000, Abdominal Assembly | 572, Subpart U
| (ix) Drawing No. 175–5500 Lumbar Spine Assembly | 572, Subpart U
| (x) Drawing No. 175–6000 Pelvis Assembly | 572, Subpart U
| (xi) Drawing No. 175–7000–1, Leg Assembly—left | 572, Subpart U
| (xii) Drawing No. 175–7000–2, Leg Assembly—right | 572, Subpart U
| (xiii) Drawing No. 175–8000, Neoprene Body Suit | 572, Subpart U
| (xiv) Drawing No. 175–9000, Headform Assembly | 572, Subpart U
| Drawings and Specifications for SID–IIsD Small Female Crash Test Dummy, Part 572 Subpart V, September 2006, consisting of:
| (i) Drawing No. 180–0000, SID–IIsD Complete Assembly | 572, Subpart V
| (ii) Drawing No. 180–1000, 6 Axis Head Assembly | 572, Subpart V
| (iii) Drawing No. 180–2000, Neck Assembly | 572, Subpart V
| (iv) Drawing No. 180–3000, Upper Torso Assembly | 572, Subpart V
| (v) Drawing No. 180–3005, Washer, Clamping | 572, Subpart V
| (vi) Drawing No. 9000021, Screw, SHCS 3/8–16 x 1 NYLOK | 572, Subpart V
| (vii) Drawing No. 900005, Screw, SHCS 1/4–20 x 5/8 NYLOK | 572, Subpart V
| (viii) Drawing No. 180–4000, Lower Torso Assembly Complete | 572, Subpart V
| (ix) Drawing No. 180–5000–1, Complete Leg Assembly, Left | 572, Subpart V
| (x) Drawing No. 180–5000–2, Complete Leg Assembly, Right | 572, Subpart V
| (xi) Drawing No. 180–6000–1, Arm Assembly Left Molded | 572, Subpart V
| (xii) Drawing No. 180–6000–2, Arm Assembly Right Molded | 572, Subpart V
| (xiii) Drawing No. 180–9000, SID–IIsD Headform Assembly | 572, Subpart V
| Procedures for Assembly, Disassembly and Inspection (PADI) of the EuroSID–2re 50th Percentile Adult Male Side Impact Crash TestDummy, September 2006 | 572, Subpart U
| Procedures for Assembly, Disassembly and Inspection (PADI) of the SID–IIsD Side Impact Crash Test Dummy, September 2006 | 572, Subpart V
| A User's Manual entitled “Free–Motion Headform User's Manual,” version 2, March 1995 | 572.100; 572.101, 572.103
| Reprographic Technologies
9107 Gaither Road, Gaithersburg, MD 20877, Telephone (301) 419–5070, FAX (301) 419–5069
| Drawings and Specifications:
| SA 150 M010—Head Assembly, 1973 | Part 572
| SA 150 M020—Neck Assembly, 1973 | Part 572
| SA 150 M030—Shoulder–thorax Assembly, 1973 | Part 572
| SA–SID–M030, Revision A, titled “Thorax Assembly”, complete, dated May 18, 1994 | Part 572, subpart M
| SA 150 M050—Lumbar Spine Assembly, 1973 | Part 572
| SA–SID–M050, Revision A, titled “Lumbar Spine Assembly”, dated May 18, 1994 | Part 572, subpart M
| SA–SID–M050— Lumbar Spine Assembly drawing, Revision B, dated September 12, 1996 | Part 572
| SA–SID–053 “Lumbar Spine Assembly”, Revision A, dated May 18, 1994 | Part 572, subpart M
| SA 150 M060—Pelvis and Abdomen Assembly, 1973 | Part 572
| SA–SID–M060, Revision A, “Pelvis and Abdomen Assembly”, dated May 18, 1994 | Part 572, subpart M
| SA 150 M070—Right Arm Assembly, 1973 | Part 572
| SA 150 M071—Left Arm Assembly, 1973 | Part 572
| SA 150 M080—Right Leg Assembly, 1973 | Part 572
| SA–SID–M080, “Leg Assembly, Right”, dated August 13, 1987 | Part 572, subpart M
| SA 150 M081—Left Leg Assembly, 1973 | Part 572
| SA–SID–M081, “Leg Assembly, Left”, dated August 13, 1987 | Part 572, subpart M
| Operation and Maintenance Manual for 3–year–old Test Dummy, SA 103C, Contract No. DOT–HS–6–01294, dated May 28, 1976 | Part 572
| SA 103C 010 Head Assembly, 1976 | Part 572
| SA 103C 020 Neck Assembly, 1976 | Part 572
| SA 103C 030 Torso Assembly, 1976 | Part 572
| SA 103C 141 Upper Arm Assembly Left, 1976 | Part 572
| SA 103C 142 Upper Arm Assembly Right, 1976 | Part 572
| SA 103C 051 Forearm Hand Assembly Left, 1976 | Part 572
| SA 103C 052 Forearm Hand Assembly Right, 1976 | Part 572
| SA 103C 061 Upper Leg Assembly Left, 1976 | Part 572
| SA 103C 062 Upper Leg Assembly Right, 1976 | Part 572
| SA 103C 071 Lower Leg Assembly Left, 1976 | Part 572
| SA 103C 072 Lower Leg Assembly Right, 1976 | Part 572
| SA 103C 081 Foot Assembly Left, 1976 | Part 572
| SA 103C 082 Foot Assembly Right, 1976 | Part 572
| Parts List and Drawings, Subpart R, CRABI 12–month–old Infant Crash Test Dummy (CRABI–12, Alpha version), August 2001 | 572.150
| Parts List and Drawings, Subpart R, CRABI 12–month–old Infant Crash Test Dummy (CRABI–12, Alpha version), August 2001, consisting of:
| Drawing No. 921022–001, Head Assembly | 572.150, 572.151, 572.152, 572.154, 572.155
| Drawing No. 921022–041, Neck Assembly | 572.150, 572.151, 572.153, 572.154, 572.155
| Drawing No. TE–3200–160, Headform | 572.150, 572.151, 572.153
| Drawing No. 921022–060, Torso Assembly | 572.150, 572.151, 572.154, 572.155
| 921022–055, Leg Assembly | 572.150, 572.151, 572.155
| 921022–054, Arm Assembly | 572.150; 572.151; 572.155
| The CRABI–12 Test Dummy Parts List | 572.150
| Procedures for Assembly, Disassembly, and Inspection (PADI), Subpart R, CRABI 12–month–old Infant Crash Test Dummy (CRABI–12, Alpha version), August 2001 | 572.150, 572.151
| Parts List and Drawings, Subpart P, Hybrid III 3–year–old Child Crash Test Dummy (H–III3C, Alpha version), September 2001, including:
| Drawing No. 210–1000, Head Assembly | 572.140, 572.141, 572.142, 572.144, 572.145, 572.146
| Drawing No. 210–2001, Neck Assembly | 572.140, 572.141, 572.143, 572.144, 572.145, 572.146
| Drawing No. 210–3000, Upper/Lower Torso Assembly | 572.140, 572.141, 572.143
| Drawing No. 210–5000–1(L), –2(R), Leg Assembly | 572.140, 572.141, 572.144, 572.145, 572.146
| Drawing No. 210–6000–1(L), –2(R), Arm Assembly | 572.140, 572.141, 572.144, 572.145
| The Hybrid III Three–year–old Dummy Parts List | 572.140
| Procedures for Assembly, Disassembly, and Inspection (PADI), Subpart P, Hybrid III 3–year–old Child Crash Test Dummy (H–III3C, Alpha version), September 2001 | 572.140, 572.141
| AGA, 572.141RD–AR–330 Hybrid III Dummy Transducers list, Anthropomorphic Dummies for Crash and Escape System Testing, Chapter 6, table 6–2, North Atlantic Treaty Organization, July 1996 | 572.31
| Construction of an Infant Dummy (Mark II) for Dynamic Tests of Crash Restraint Systems, July 2, 1974 | Part 572
| SA 106, C001, C010, C020, C030, C041, C042, C050, C060, C071 and C072 establishing specifications for an anthropomorphic test dummy representing a 6–year–old child | Part 572
| SA 106C 001, “Crash Test Dummy Ass'y. 6 Yr. Old Child”, sheets 1 through 7, released July 11, 1997, technical drawings and specifications, parts list package, and list of measurement definitions (“Landmark Definitions” (sheet 18) for anthropomorphic test dummy representing 6–year–old child | 572.71; 572.74; 572.78
| Drawings and Specifications for the Hybrid III 6–year–old child dummy (H–III6C) Subpart I, Beta Version, June 2002 consisting of:
| Drawing No. 127–1000, Head Assembly | 572.120
| Drawing No. 127–1015–Neck Assembly | 572.120
| Drawing No. 127–2000, Upper Torso Assembly | 572.120
| Drawing No. 127–3000, Lower Torso Assembly | 572.120
| Drawing No. 127–4000, Leg Assembly | 572.120
| Drawing No. 127–5000, Arm Assembly | 572.120
| The Hybrid III Six–year–old Parts List | 572.120
| Procedures for Assembly, Disassembly, and Inspection (PADI) of the Hybrid III 6–year–old Child Crash Test Dummy, Beta version (June 2002) | 572.120
| SA 106C 010, Revision A (sheet 8) Head Assembly, 1989 | Part 572
| SA 106C 020, Revision A (sheet 9) Neck Assembly, 1989 | Part 572
| SA 106C 030, Revision C (sheet 10) Thorax Assembly, 1996 (including 6C–1610–1 through –4 Screw Button Head Socket, 1996, and 6C–1021 Ballast, 6–year–old Thoraxc [for 7267A], 1996) | Part 572
| SA 106C 030, Revision D (sheet 11) Thorax Assembly, 1996 (including 6C–909, Revision A, Cover–chest Accelerometer, 1996 and 6C– 1000–1, Revision C,Sternum Thoracic Weld Ass'y., 1996) | Part 572
| SA 106C 041, Revision A (sheet 14) Arm Assembly, Right, 1989 | Part 572
| SA 106C 042, Revision A (sheet 15) Arm Assembly, Left, 1989 | Part 572
| SA 106C 050, Revision A (sheet 12) Lumbar Spine Assembly, 1989 | Part 572
| SA 106C 060, Revision A (sheet 13)Pelvis Assembly, 1989 | Part 572
| SA 106C 071, Revision B (sheet 16) Leg Assembly, Right, 1995 | Part 572
| SA 106C 072, Revision B (sheet 17) Leg Assembly, Left, 1995 | Part 572
| User's Manual entitled “Six–Year–Old Size Child Test Dummy SA106C,” October 28, 1991 | Part 572
| LP 1049/1 through 1049/54, dummy components and parts | Part 572
| LP 1049/A, March 1979, assembled dummy with its major components | Part 572
| LP 1049/0 parts list (5 sheets), index | Part 572
| The TNO P3/4, Child Dummy Users Manual, January 1979, Instituut voor Wegtransportmiddelen TNO | Part 572
| SA 1001, 1974 | Part 572
| FIR100 Filter Program, Version 1.0, dated July 16, 1990 | 572.44
| Parts List and Drawings, Part 572 Subpart S Hybrid III Weighted Six–Year–Old Child Test Dummy (H–III6CW, Alpha Version), April 13, 2004, including:
| Drawing No. 167–0000, Complete Assembly | 572.160, 572.161 Table A, 572.161(a)(1)
| Drawing No. 167–2000, Upper Torso Assembly | 572.160(a)(1), 572.161, 572.161 Table A, 572.164, 572.165(a)
| Drawing No. 167–2020 (Revised) December 8, 2005: Spine Box Weight | 572.160(a)(1), 572.161(a)(1), 572.161 Table A, 572.165(a)
| Drawing No. 167–3000, Lower Torso Assembly | 572.160(a)(1), 572.161(a)(1), 572.161 Table A, 572.165(a)
| Drawing No. 167–3010 (Revision A) December 8, 2005: Lumbar Weight Base | 572.160(a)(1), 572.161(a)(1), 572.161 Table A, 572.165(a)
| Procedures for Assembly, Disassembly, and Inspection (PADI) of the Weighted Hybrid III 6–year–old Child Crash Test Dummy (H–III6CW), April 2004 | 572.160(a)(1), 572.161(a)(3)
| The Hybrid III Weighted Six–Year–Old Child Parts/Drawings List, April 13, 2004 | 572.160(a)(1); 572.161(a)(1)
| Side Impact Moving Deformable Barrier Drawings, DSL–1279, 1280, 1281, 1284, and 1286 dated Aug. 20, 1980; DSL 1278; 1283, 1285, 1287, and 1290 dated October 1991 | 587.6
| Drawing numbers 126–0000 through 126–0015 (sheets 1 through 3), 126–0017 through 126–0027, and a parts list “Parts List for CAMI Newborn Dummy”, Construction of the Newborn Infant Dummy, 1992 | Part 572, subpart K
| Dummy assembly drawing SA–SID–M001, revision C, “50th Percentile Anthropomorphic Side Impact Dummy”, dated September 12, 1996 | Part 572
| Dummy Assembly drawings SID–M001A revision A, SID–M001 revision B, SA–SID–M030 revision A, SA–SID–050 revision A, SA–SID–M060 revision A, SA–SID–087 sheet 1 revision H and SA–SID–087 sheet 2 revision H, all dated May 18, 1994; and the User's Manual dated May 1994 | 572.41
| Drawing SA–SID–M001A revision A dated May 18, 1994 | 572.42(a); 572.43(a)
| Drawing SA–SID–M001A, revision B, “Completed Assembly Side Impact Dummy”, dated September 12, 1996 | Part 572
| Drawing SID–SM–001, dated May 12, 1994 | Part 572
| Drawing SID–SM–002, dated May 12, 1994 | Part 572
| Drawing SID–005 revision F dated May 18, 1994 | 572.44(b)(1)
| Drawing SID–087 revision H dated May 18, 1994 | 572.44(c)
| Procedures for Disassembly, Inspection, Assembly and Limbs Adjustment of the Hybrid III Dummy issued April 1997, revised June 1998 | 572.31
| Side Impact Dummy, Hybrid III, Anthropomorphic Test Dummy Parts List, dated May 10, 1997, and Users Manual, dated May 1997 | Part 572, subpart M
| Anthropomorphic Test Dummy Parts List, Hybrid III, dated June 26, 1998, and Parts List Index, dated June 26, 1998 | 572.31
| Drawing SA–SIDH3–M001 “Complete Assembly SIDH3”, dated April 19, 1997 | Part 572, subpart M
| Drawing SIDH3–001, “Head–Neck Bracket”, dated August 30, 1996 | Part 572, subpart M
| Drawing SIDH3–006, “Upper and Middle Shoulder Foam”, dated May 10, 1997 | Part 572, subpart M
| Parts List and Drawings, Part 272 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (H–III5F, Alpha Version), June 2002 | 572.130, 572.131
| Parts List and Drawings, Part 272 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (H–III5F, Alpha Version), June 2002, including:
| Drawing No. 880105–100X, Head Assembly | 572.130, 572.131, 572.132, 572.133, 572.134, 572.135, 572.137
| Drawing No. 880105–250, Neck Assembly | 572.130, 572.131, 572.133, 572.134, 572.135, 572.137
| Drawing No. 880105–300, Upper Torso Assembly | 572.130, 572.131, 572.134, 572.135, 572.137
| Drawing No. 880105–450, Lower Torso Assembly | 572.130, 572.131, 572.134, 572.135, 572.137
| Drawing No. 880105–560–1, Complete Leg Assembly–left | 572.130, 572.131, 572.135, 572.136, 572.137
| Drawing No. 880105–560–2, Complete Leg Assembly–right | 572.130, 572.131, 572.135, 572.136, 572.137
| Drawing No. 880105–728–1, Complete Arm Assembly–left | 572.130, 572.131, 572.134, 572.135
| Drawing No. 880105–728–2, Complete Arm Assembly–right | 572.130, 572.131, 572.134, 572.135
| Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy Parts List | 572.130, 572.131
| Procedures for Assembly, Disassembly, and Inspection (PADI) of the Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy, Alpha Version (February 2002) | 572.130, 572.132
| The “Free Motion Headform Drawing Package” consisting of the following drawings:
| Drawing number 92041–001 titled “Head Form Assembly,” dated November 30, 1992 | 572.100, 572.101; 572.102; 572.103
| Drawing number 92041–002 titled, “Skull Assembly,” dated November 30, 1992 | 572.100, 572.101; 572.102; 572.103
| Drawing number 92041–003 titled, “Skull Cap Plate Assembly,” dated November 30, 1992 | 572.100, 572.101; 572.102; 572.103
| Drawing number 92041–004 titled, “Skull Cap Plate,” dated November 30, 1992 | 572.100, 572.101; 572.102; 572.103
| Drawing number 92041–005 titled, “Threaded Pin,” dated November 30, 1992 | 572.100, 572.101; 572.102; 572.103
| Drawing number 92041–006 titled, “Hex Nut,” dated November 30, 1992 | 572.100, 572.101; 572.102; 572.103
| Drawing number 92041–008 titled, “Head Skin without Nose,” dated November 30, 1992, as amended March 6, 1995 | 572.100, 572.101; 572.102; 572.103
| Drawing number 92041–009 titled, “Six–Axis Load Cell Simulator Assembly,” dated November 30, 1992 | 572.100, 572.101; 572.102; 572.103
| Drawing number 92041–011 titled, “Head Ballast Weight,” dated November 30, 1992 | 572.100, 572.101; 572.102; 572.103
| Drawing number 92041–018, “Head Form Bill of Materials,” dated November 30, 1992 | 572.100, 572.101; 572.102; 572.103
| Drawing number 78051–148, titled “Skull–Head (cast) Hybrid III,” dated May 20, 1978, as amended August 17, 1978 | 572.100, 572.101; 572.102; 572.103
| Drawing number 78051–228/78051–229 titled “Skin–Hybrid III,” dated May 20, 1978 as amended through September 24, 1979 | 572.100, 572.101; 572.102; 572.103
| Drawing number 78051–339 titled “Pivot Pin—Neck Transducer,” dated May 20, 1978, as amended May 14, 1986 | 572.100, 572.101; 572.102; 572.103
| Drawing number 78051–372 titled “Vinyl Skin Formulation Hybrid III,” dated May 20, 1978 | 572.100, 572.101; 572.102; 572.103
| Drawing number C–1797, “Neck Blank, dated August 1, 1989 | 572.100, 572.101; 572.102; 572.103
| Drawing number SA572–S4, titled “Accelerometer Specification,” dated November 30, 1992 | 572.100, 572.101; 572.102; 572.103
| Society of Automotive Engineers
400 Commonwealth Dr., Warrendale, PA 15096–0001, Telephone: (412) 776–4841
| SAE J211–1980 Instrumentation for Impact Tests | 572.36(i); 572.44
| SAE J211–1995 “Instrumentation for Impact Tests—Parts 1 and 2,” dated March, 1995 | 572.36; part 572, subpart M; 572.120
| SAE J211/1, Revised March 1995: “Instrumentation for Impact Tests— Part 1: Electronic Instrumentation” | 572.137; 572.146; 572.150; 572.155; 587.12; 587.15
| SAE J211/2, Revised March 1995, Instrumentation for Impact Tests—Part 2: Photographic Instrumentation | 572.137
| SAE J449a–1963 Surface Texture Control | 581.6(b)(1)
| SAE J599b–1970 Lighting Inspection Code | 581.5(c)
| SAE J602a–1970 Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | 581.5(c)
| SAE J843a–1966 Brake System Road Test Code—Passenger | 575.101(e)(2)
| SAE J1733 1994–12, Information Report “Sign Convention for Vehicle Crash Testing,”, December 1994 | Part 572, Subpart M; 572.120; 572.137; 572.140; 572.146; 572.150; 572.155 |
|