49 CFR (Parts 186–199)
RESEARCH AND SPECIAL PROGRAMS ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (PIPELINE SAFETY REGULATIONS)
| 49 CFR
|
American Gas Association
400 North Capitol Street NW, Washington, DC 20001 or from ILI Infodisk, Inc., 610 Winters Avenue, Paramus, NJ 07652
|
AGA Pipeline Research Committee, Project PR–3–805, A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe, December 1989 | 192.933(a); 192.485(c); 195.3; 195.452 (h)(4)(i)(B)
|
AGA Purging Principles and Practice, Third edition, 2001 | 193.2013; 193.2513; 193.2517; 193.2615
|
American National Standards Institute (ANSI)
25 West 43rd Street, 4th Floor, New York, NY 10036; phone: 1 (212) 642–4900; fax: 1 (212) 398–0023; http://webstore.ansi.org/ansidocstore/default.asp
|
ANSI B 16.9–78 Factory Made Wrought Steel Butt–Welding Fittings | 195.118
|
ANSI B 31.4–79 Liquid Petroleum Transportation Piping Systems | 195.110
|
American Petroleum Institute
1220 L St. NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
|
API Specification 5L “Specification for Line Pipe” 43rd edition and errata (2004) | 192.7; 192.55(e); 192.113; Item I of Appendix B part 192; 195.3; 195.106
|
API Recommended Practice 5L1 “Recommended Practice for Railroad Transportation of Line Pipe” (6th edition, 1992) | 192.7; 192.65
|
API Specification 6D “Specification for Pipeline Valves (Gate, Plug, Ball, and Check Valves)” (22nd edition, 2002. Also issued as ISO 14313–1999) | 192.7; 192.145; 195.3; 195.116
|
API Specification 12 F “Specification for Shop Welded Tanks for Storage of Production Liquids” (11th edition, November 1, 1994) | 195.3; 195.132; 195.205; 195.264; 195.307; 195.565; 195.579
|
API Recommended Practice 80 “Guidelines for the Definition of Onshore Gas Gathering Lines,” First edition, April 2000 | 192.7; 192.8
|
API Standard 510 “Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair, and Alteration” (8th edition, June 1997, and Addenda 1 through 4) | 195.3; 195.205; 195.432
|
API Standard 620 “Design and Construction of Large, Welded, Low–Pressure Storage Tanks” (10th edition, 2002) | 195.3; 195.132; 195.205; 195.264; 195.307
|
API Standard 650 “Welded Steel Tanks for Oil Storage” Tenth edition, 1998, with Addendum 1 dated January 2000, Addendum 2 dated November 2001, and Addendum 3 dated September 2003 | 195.3; 195.132; 195.205; 195.264; 195.307; 195.565; 195.579
|
API Standard 651 “Cathodic Protection of Aboveground Petroleum Storage Tanks” (2nd edition, December 1997) | 195.3; 195.565; 195.579
|
API Standard 652 “Lining of Aboveground Petroleum Storage Tank Bottoms” (2nd edition, December 1997) | 195.3; 195.579
|
API Standard 653 “Tank Inspection, Repair, Alteration, and Reconstruction” (3rd edition, 2001, and Addendum 1, 2003) | 195.3; 195.205; 195.432
|
API Standard 1104 “Welding of Pipelines and Related Facilities” (19th edition, 1999, including its October 31, 2001 errata) | 192.7; 192.227(a); 192.229(c)(1); 192.241(c); Item II, Appendix B to Part 192; 195.3; 195.222; 195.228
|
API 1130, “Computational Pipeline Monitoring for Liquid Pipelines”, Second edition, 2002 | 195.3, 195.134, 195.444
|
API Recommended Practice 1162, “Public Awareness Programs for Pipeline Operators,” First Edition, December 2003 | 192.7; 192.616; 195.3; 195.440
|
API Standard 2000 “Venting Atmospheric and Low–Pressure Storage Tanks” (5th edition, 1998 and errata) | 195.3; 195.264
|
API Standard 2003 “Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents” (6th edition, December 1998) | 195.3; 195.405
|
API Standard 2026 “Safe Access/Egress Involving Floating Roofs of Storage Tanks in Petroleum Service” (2nd edition, April 1998) | 195.3; 195.405
|
API Standard 2350 “Overfill Protection for Storage Tanks in Petroleum Facilities” (2nd edition, January 1996) | 195.3; 195.428
|
API Standard 2510 “Design and Construction of LPG Installations (8th edition, 2001) | 195.3; 195.132; 195.205; 195.264; 195.307; 195.428; 195.432
|
American Society of Civil Engineers (ASCE)
Parallel Centre, 1801 Alexander Bell Drive, Reston, Virginia 20191–4400
|
ASCE 7–02 “Minimum Design Loads for Buildings and Other Structures” (Second edition, 2002) | 193.2013; 193.2067
|
American Society of Mechanical Engineers (ASME)
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
Boiler and Pressure Vessel Code:
|
Section I, Division I: Rules for Construction of Power Boilers, including Addenda through 2005 | 192.7; 192.153(a)
|
Section VIII, Division 1, Rules for Construction of Pressure Vessels (2004, including Addenda through July 1, 2005) | 192.7; 192.153; 192.165; 193.2013; 193.2321; 195.3; 195.124; 195.307
|
Section VIII, Division 2, Rules for Construction of Pressure Vessels: Alternative Rules, including Addenda through July 1, 2005 | 192.7; 192.153; 192.165; 193.2321; 195.3; 195.307
|
Section IX Welding and Brazing Qualifications (2001), including Addenda through July 1, 2005 | 192.7; 192.227; Item II, Appendix B to part 192; 195.3; 195.222
|
ASME/ANSI B16.1 Cast Iron Pipe Flanges and Flanged Fittings (1998) | 192.7; 192.147(c)
|
ASME/ANSI B16.5–2003 Pipe Flanges and Flanged Fittings (October 2004) | 192.7; 192.147; 192.279
|
ASME/ANSI B16.9–2003 Factory–Made Wrought Steel Butt Welding Fittings (February 2004) | 195.3; 195.118
|
ASME/ANSI B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids, 2002 | 195.3; 195.452(h)(4)(i)(B)
|
ASME/ANSI B31.8–2003 Gas Transmission and Distribution Piping Systems (Published February 2004) | 192.619; 195.3; 195.5; 195.406
|
ASME/ANSI B31.8S–2004 (Supplement to B31.8), Managing System Integrity of Gas Pipelines, | 192.7; 192.903; 192.907; 192.911; 192.913; 192.917; 192.921; 192.923; 192.925; 192.927; 192.929; 192.933; 192.935; 192.937; 192.939; 192.945
|
ASME/ANSI B31G, Manual for Determining the Remaining Strength of Corroded Pipelines, 1991 (Reaffirmed 2004) | 192.485; 192.933; 195.3; 195.452 (h)(4)(i)(B); 195.452 (h)(4)(iii)(D)
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
Noncurrent ASTM standards are available from: Engineering Societies Library, 345 E. 47th St., New York, NY 10017.
|
ASTM A 53/A53M–04a Standard Specification for Pipe, Steel, Black and Hot–Dipped, Zinc–Coated, Welded and Seamless | 192.7; 192.113; item I, Appendix B to part 192; 195.3; 195.106
|
ASTM A 106/A 106M–04b, Standard Specification for Seamless Carbon Steel Pipe for High–Temperature Service | 192.7; 192.113; Item I, Appendix B to Part 192; 195.3; 195.106
|
ASTM A 333/A 333M–05 Standard Specification for Seamless and Welded Steel Pipe for Low–Temperature Service | 192.7; 192.113; Item 1, Appendix B to part 192; 195.3; 195.106
|
ASTM A 372/A 372M–03 Standard Specification for Carbon and Alloy Steel Forgings for Thin–Walled Pressure Vessels | 192.7; 192.177
|
ASTM A 381–96 (Reapproved 2001) Standard Specification for Metal–Arc–Welded Steel Pipe for Use With High–Pressure Transmission Systems | 192.7; 192.113; Item 1, Appendix B to part 192; 195.3; 195.106
|
ASTM A 671–04 Standard Specification for Electric–Fusion–Welded Steel Pipe for Atmospheric and Lower Temperatures | 192.7; 192.113; Item 1, Appendix B to part 192; 195.3; 195.106
|
ASTM A 672–96 (Reapproved 2001) Standard Specification for Electric–Fusion–Welded Steel Pipe for High–Pressure Service at Moderate Temperatures | 192.7; 192.113; Item I, Appendix B to part 192; 195.3; 195.106
|
ASTM A 691–98 (Reapproved 2002) Standard Specification for Carbon and Alloy Steel Pipe, Electric–Fusion–Welded for High–Pressure Service at High Temperatures | 192.7; 192.113; Item 1, Appendix B to part 192; 195.3; 195.106
|
ASTM D 638–03 Standard Test Method for Tensile Properties of Plastics | 192.7; 192.283(a)(3); 192.283(b)(1)
|
ASTM D 2513–87 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings | 192.7; 192.63(a)(1)
|
ASTM D 2513–99 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings | 192.7; 192.191(b); 192.281(b)(2); 192.283(a)(1)(i); Item 1, Appendix B to part 192
|
ASTM D 2517–2000 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings | 192.7; 192.191; 192.281; 192.283; Item 1, Appendix B to part 192
|
ASTM F 1055 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing (1998) | 192.7; 192.283
|
Gas Technology Institute (GTI)
1700 S. Mount Prospect Road, Des Plaines, IL 60018
|
GRI–89/0176, LNGFIRE: A Thermal Radiation Model for LNG Fires, June 29, 1990 | 193.2057
|
GRI–96/0396.5—Evaluation of Mitigation Methods for Accidential LNG Releases, Volume 5: Using FEM3A for LNG Accident Consequence Analyses, April 1997 | 193.2059
|
GRI–02/0057—Final Report: Internal Corrosion Direct Assessment of Gas Transmission Pipelines—Methodology, Published April 1, 2002 | 192.7; 192.927
|
GTI–04/0049; DEGADIS 2.1 “Dense Gas Dispersion Model for LNG Vapor Dispersion,” April 2004 | 193.2013; 193.2059
|
Manufacturers Standardization Society of the Valve and Fittings Industry, Inc.
127 Park Street NE, Vienna, Virginia 22180
|
MSS SP–44–96 Steel Pipe Line Flanges 1996, (Reaffirmed 2001) | 192.147
|
MSS SP–75 Specification for High–Test Wrought Butt Welding Fittings, 2004 | 195.3; 195.118
|
NACE International
1440 South Creek Drive, Houston, TX 77084
|
NACE Standard RP0169–2002, Control of External Corrosion on Underground or Submerged Metallic Piping Systems | 195.3; 195.571; 195.573(a)(2)
|
NACE RP–0502–2002: NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | 192.923; 192.925; 192.931; 192.935; 192.939; 195.3; 195.588
|
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
|
ANSI/NFPA 30 Flammable and Combustible Liquids Code, 2003 | 192.7; 192.735(b); 195.264
|
ANSI/NFPA 58 Liquefied Petroleum Gas Code (LP–Gas Code), 2004 | 192.7; 192.11
|
ANSI/NFPA 59 Utility LP–Gas Plant Code, 2004 | 192.7; 192.11
|
ANSI/NFPA 59A Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG), 2001 edition | 193.2013; 193.2019; 193.2051; 193.2057; 193.2059; 193.2101; 193.2301; 193.2303; 193.2401; 193.2521; 193.2639; 193.2801
|
NFPA 59A Storage and Handling Liquefied Natural Gas, 1972 | 193.2005(c)
|
NFPA 59A Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG), 1996 | 193.2019
|
ANSI/NFPA 70 National Electrical Code, 2005 | 192.7; 192.163; 192.189
|
Plastic Pipe Institute, Inc. (PPI)
1825 Connecticut Avenue NW, Suite 680, Washington DC, 20009
|
PPI TR–3/2004 “Policies and Procedures for Developing Hydrostatic Design Bases (HDB), Pressure Design Bases (PDB), and Minimum Required Strength (MRS) Ratings for Thermoplastic Piping Materials or pipe” | 192.7; 192.121 |