49 CFR (PARTS 100–185)
RESEARCH AND SPECIAL PROGRAMS ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (HAZARDOUS MATERIALS REGULATIONS)
| 49 CFR
|
Air Transport Association of America
1301 Pennsylvania Avenue NW., Wasington, DC 20004–1707
|
| ATA Specification No. 300, Packaging of Airline Supplies, Revision 19, July 31, 1996 | 171.7; 172.102
|
Aluminum Association
420 Lexington Ave., New York, NY 10017
|
| Aluminum Standards and Data, Seventh Edition, June 1982 | 171.7; 172.102; 178.65
|
American National Standards Institute (ANSI)
25 West 43rd Street, 4th Floor, New York, NY 10036; phone: 1 (212) 642–4900; fax: 1 (212) 398–0023; http://webstore.ansi.org/ansidocstore/default.asp
|
| ANSI B16.5–77 Steel Pipe Flanges, Flanged Fittings | 178.360–4
|
| ANSI N14.1 American National Standard for Nuclear Materials—Uranium Hexafluoride—Packaging for Transport (1971, 1982, 1987, 1990, 1995 and 2001 Editions) | 171.7; 173.417; 173.420
|
| ANSI/ASHRAE 15–1994, Safety Code for Mechanical Refrigeration | 171.7; 173.306; 173.307
|
American Petroleum Institute
1220 L Street, NW, Washington, DC 20005–4070
|
| API Recommended Practice 1604: Closure of Underground Petroleum Storage Tanks, Third Edition, March 1996 | 171.7; 172.102
|
American Pyrotechnics Association
P.O. Box 213, Chestertown, MD 21620
|
| APA Standard 87–1 Standard for Construction and Approval for Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics, December 1, 2001 edition | 171.7; 173.56
|
American Society of Mechanical Engineers
ASME International, 22 Law Drive, P.O. Box 2900, Fairfield, New Jersey 07007–2900
|
| ASME Code:
|
| Sections II (Parts A and B), V, VIII (Division I) and IX of 1998 Ed. of American Society of Mechanical Engineers Boiler and Pressure Code | 172.102; 173.24b; 173.32; 173.306; 173.315; 173.318; 173.420; 178.245–1; 187.245–3; 178.245–4; 178.245–6; 178.245–7; 178.255–1; 178.255–2; 178.255–14; 178.255–15; 178.270–2; 178.270–3; 178.270–7; 178.270–9; 178.270–11; 178.270–12; 178.271–1; 178.272–1; 178.273; 178.274; 178.276; 178.277; 178.320; 178.337–1; 178.337–2; 178.337–3; 178.337–4; 178.337–6; 178.337–16; 178.337–18; 178.338–1; 178.338–2; 178.338–3; 178.338–4; 178.338–5; 178.338–6; 178.338–13; 178.338–16; 178.338–18; 178.338–19; 178.345–1; 178.345–2; 178.345–3; 178.345–4; 178.345–7; 178.345–14; 178.345–15; 178.346–1; 178.347–1; 178.348–1; 179.400–3; 180.407
|
| ASME B31.4: Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids, Chapters II, III, IV, V and VI, 1998 Edition | 171.7, 173.5a
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
Noncurrent ASTM standards are available from: Engineering Societies Library, 354 E. 47th St., New York, NY 10017.
|
| ASTM A 20/A 20M–93a Standard Specification for General Requirements for Steel Plates for Pressure Vessels | 171.7; 178.337–2; 179.102–4; 179.102–1; 179.102–17
|
| ASTM A 47–68 Malleable Iron Castings | 179.200–15
|
| ASTM A 240/A 240M–99b Standard Specification for Heat–Resisting Chromium and Chromium–Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels | 171.7; 178.57; 178.358–5; 179.100–7; 179.100–10; 179.102–1; 179.102–4; 179.102–17; 179.200–7; 179.201–5; 179.220–7; 179.300–7; 179.400–5
|
| ASTM A 242–81 High–Strength Low Alloy Structural Steel | 178.338–2
|
| ASTM A 262–93a Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 171.7; 179.100–7; 179.200–7; 179.201–4
|
| ASTM A 285–78 Pressure Vessel Plates, Carbon Steel, Low– and Intermediate–Tensile Strength | 179.300–7
|
| ASTM A 300–58 Steel Plates for Pressure Vessels for Service at Low Temperatures | 178.337–2
|
| ASTM A 302/A 302M–93 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese–Molybdenum and Manganese–Molybdenum Nickel | 171.7; 179.100–7; 179.200–7; 179.220–7
|
| ASTM A 333–67 Seamless and Welded Steel Pipe for Low–Temperature Service | 178.45
|
| ASTM A 370–94 Standard Test Methods and Definitions for Mechanical Testing of Steel Products | 171.7; 179.102–1; 179.102–4; 179.102–17
|
| ASTM A 441–81 High–Strength Low–Alloy Structural Manganese Vanadium Steel | 178.338–2
|
| ASTM A 514–81 High–Yield–Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding | 178.338–2
|
| ASTM A 515/A 515–03M, Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate– and Higher–Temperature Service | 171.7; 179.300–7
|
| ASTM A 516/A 516M–90 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower–Temperature Service | 171.7; 178.337–2; 179.100–7; 179.102–1; 179.102–2; 179.102–4; 179.102–17; 179.200–7; 179.220–7; 179.300–7
|
| ASTM A 537/A 537M–91 Standard Specification for Pressure Vessel Plates, Heat–Treated, Carbon–Manganese–Silicon Steel | 171.7; 179.100–7; 179.102–4; 179.102–17
|
| ASTM A 572–82 High–Strength Low Alloy Columbium–Vanadium Steels of Structural Quality | 178.338–2
|
| ASTM A 588–81 High–Strength Low–Alloy Structural Steel with 50 ksi Minimum Yield Point to 4 in. Thick | 178.338–2
|
| ASTM A 606–75 Steel Sheet and Strip, Hot–Rolled and Cold–Rolled, High Strength, Low Alloy, with Improved Atmospheric Corrosion Resistance (reapproved 1981) | 178.338–2
|
| ASTM A 607–98 Standard Specification for Steel, Sheet and Strip, High–Strength, Low–Alloy, Columbium or Vanadium, or Both, Hot–rolled and Cold–rolled | 171.7; 178.338–2
|
| ASTM A 612–72a High–Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service | 178.337–2
|
| ASTM A 633–79a Normalized High–Strength Low Alloy Structural Steel | 178.338–2
|
| ASTM A 715–81 Steel Sheet and Strip, Hot–Rolled, High–Strength, Low–Alloy, with Improved Formability | 178.338–2
|
| ASTM A 1008/ASTM A 1008M–03, Standard Specification for Steel, Sheet, Cold–rolled, Carbon, Structural, High–Strength Low–Alloy, and High–Strength Low–Alloy with Improved Formability | 171.7; 178.338–2; 178.345–2
|
| ASTM A 1011/ASTM A 1011M–03a, Standard Specification for Steel, Sheet and Strip, Hot–rolled, Carbon, Structural, High–Strength Low–Alloy, and High–Strength Low–Alloy with Improved Formability | 171.7; 178.338–2; 178.345–2
|
| ASTM B 162–93a Standard Specification for Nickel Plate, Sheet, and Strip | 171.7; 173.249; 179.200–7
|
| ASTM B 209–93 Standard Specification for Aluminum and Aluminum–Alloy Sheet and Plate | 171.7; 179.100–7; 179.200–7; 179.220–7
|
| ASTM B 221–76 Aluminum Alloy Extruded Bars, Rods, Shapes, and Tubes | 178.46
|
| ASTM B 557–84 Tension Testing Wrought and Cast Aluminum and Magnesium–Alloy Products | 171.7; 178.46
|
| ASTM B 580–79 (Reapproved 2000) Standard Specification for Anodic Oxide Coatings on Aluminium | 171.7; 173.316; 173.318; 178.338–17
|
| ASTM D 1238–90b Standard Test Method for Flow Rates of Thermoplastics for Extrusion Plastometer | 171.7; 173.225
|
| ASTM D 1709–01, Standard Test Methods for Impact Resistance of Plastic Film by the Free–falling Dart Method | 171.7; 173.197
|
| ASTM D 1835–97, Standard Specification for Liquefied Petroleum (LP) Gases | 171.7; 180.209
|
| ASTM D 1838–64 Copper Strip Corrosion by Liquefied Petroleum (LP) Gases | 173.315
|
| ASTM D 1922–00a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method | 171.7; 173.197
|
| ASTM D 4206–96 Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open–Cup Apparatus | 173.120
|
| ASTM D 4359–90 Standard Test Method for Determining Whether a Material is a Liquid or a Solid | 171.8
|
| ASTM E 8–99 Tension Testing of Metallic Materials | 171.7; 178.36; 178.37; 178.38; 178.39; 178.44; 178.45; 178.50; 178.51; 178.53; 178.55; 178.56; 178.57; 178.58; 178.59; 178.60; 178.61; 178.68
|
| ASTM E 23–98 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | 171.7; 178.57
|
| ASTM E 112–88 Standard Test Methods for Determining Average Grain Size | 171.7; 178.44
|
| ASTM E 112–96 Standard Test Methods for Determining Average Grain Size | 171.7; 178.274; Part 178, Appendix A
|
| ASTM E 114–95 Standard Practice for Ultrasonic Pulse–echo Straight–Beam Examination by the Contact Method, 1995 | 171.7; 178.45
|
| ASTM E 213–98 Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing | 171.7; 178.45
|
American Water Works Association (AWWA)
1010 Vermont Avenue NW., Suite 810, Washington, DC 20005
|
| AWWA Standard C207–55, Steel Pipe Flanges; 1955 | 178.360–4
|
American Welding Society (AWS)
550 N.W. Le Jeune Road, Miami, FL 33126
|
| AWS Code B 3.0; Standard Qualification Procedure; 1972 (FRB 3.0–41 rev. May 73) | 178.356–2; 178.358–2
|
| AWS Code D1.0; Code for Welding in Building Construction, (FR D1.0–66) | 178.356–2; 178.358–2
|
Association of American Railroads (AAR)
American Railroads Building, 50 F St. NW., Washington, DC 20001
|
| AAR Manual of Standards and Recommended Practices, Section C—Part III, Specification for Tank Cars, Specification M–1002, December 2000 | 171.7; 173.31; 174.63; 179.6; 179.7; 179.15; 179.16; 179.20; 179.22; 179.100–9; 179.100–10; 179.100–12; 179.100–13; 179.100–14; 179.100–18; 179.101–1; 179.102–1; 179.102–4; 179.102–17; 179.103–5; 179.200–7; 179.200–9; 179.200–10; 179.200–11; 179.200–13; 179.200–17; 179.200–22; 179.201–6; 179.220–6; 179.220–7; 179.220–10; 179.220–11; 179.220–14; 179.220–18; 179.220–26; 179.300–9; 179.300–10; 179.300–15; 179.300–17; 179.400–5; 179.400–6; 179.400–8; 179.400–11; 179.400–12; 179.400–15; 179.400–18; 179.400–20; 179.400–25; 180.509; 180.513; 180.515; 180.517
|
| AAR Manual of Standards and Recommended Practices, Section 1, Specially Equipped Freight Car and Intermodal Equipment, 1988 | 174.55; 174.63
|
| AAR Specifications for Design, Fabrication and Construction of Freight Cars, Volume 1, 1988 | 179.16
|
Canadian General Standards Board (CGSB)
Place du Portage III, 6B1 11, Laurier Street, Gatineau, Quebec, Canada K1A 1G6
|
| National Standard of Canada (CAN/CGSB 43.147–2005), Construction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for the Handling, Offering for Transport, or Transportation of Dangerous Goods by Rail | 171.12
|
Chlorine Institute, Inc.
1300 Wilson Boulevard, Arlington, Virginia 22209
|
| Type 1–1/2 JQ 225, Dwg. H51970, Revision D, April 5, 1989; or Type 1–1/2 JQ 225, Dwg. H50155, Revision F, April 4, 1989 | 173.315
|
| Section 3, Pamphlet 57, Emergency Shut–off Systems for Bulk Tr., 4th Edition, October 2003 | 177.840
|
| Section 3, Pamphlet 57, Emergency Shut–off Systems for Bulk Transfer of Chlorine, Third Edition, October 1997 | 177.840
|
| Section 3, Pamphlet 166, Angle Valve Guidelines for Chlorine Bulk Transportation, 1st Edition, October 2002 | 178.337–9
|
| Type 1–1/2 JQ 225, Dwg. H50155, Revision H, November, 1996 | 173.315
|
| Type 1–1/2 JQ 225, Dwg. H51970, Revision F, November, 1996 | 173.315
|
| Standard Chlorine Angle Valve Assembly, Dwg. 104–8, July 1993 | 178.337–9
|
| Excess Flow Valve with Removable Seat, Dwg. 101–7, July 1993 | 178.337–8
|
| Excess Flow Valve with Removable Basket, Dwg. 106–6, July 1993 | 178.337–8
|
| Standards for Housing and Manway Covers for Steel Cargo Tanks, Dwg. 137–1 and Dwg. 137–2, September 1, 1982 | 178.337–10
|
| Chlorine Institute Emergency Kit “A” for 100–lb. and 150–lb. Chlorine Cylinders (with the exception of repair method using Device 8 for side leaks), Edition 10, June 2003 | 171.7; 173.3
|
| Chlorine Institute Emergency Kit “B” for Chlorine Ton Containers (with the exception of repair method using Device 9 for side leaks), Edition 9, June 2003 | 171.7; 173.3
|
Compressed Gas Association, Inc. (CGA)
4221 Walney Road, Fifth floor, Chantilly, VA 20151
|
| CGA Pamphlet C–3 Standards for Welding on Thinned–Walled Steel Cylinders, 1994 | 171.7; 178.47; 178.50; 178.51; 178.53; 178.55; 178.56; 178.57; 178.58; 178.59; 178.60; 178.61; 178.65; 178.68; 180.211
|
| CGA Pamphlet C–5 Cylinder Service Life—Seamless Steel High Pressure Cylinders, 1991 | 171.7; 173.302a
|
| CGA Pamphlet C–5 Cylinder Service Life—Seamless Steel High Pressure Cylinders, 1991 (reaffirmed) 1995 | 173.302a
|
| CGA Pamphlet C–6 Standards for Visual Inspection of Steel Compressed Gas Cylinders, 1993 | 171.7; 173.3; 173.198; 180.205; 180.209; 180.211; 180.411; 180.519
|
| CGA Pamphlet C–6.1 Standards for Visual Inspection of High Pressure Aluminum Compressed Gas Cylinders, Fourth edition, 2002 | 171.7; 180.205; 180.209
|
| CGA Pamphlet C–6.2 Guidelines for Visual Inspection and Requalification of Fiber Reinforced High–pressure Cylinders, Third Edition, 1996 | 171.7; 180.205
|
| CGA Pamphlet C–6.3 Guidelines for Visual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders, 1991 | 171.7; 180.205; 180.209
|
| CGA Pamphlet C–7 A Guide for the Preparation of Precautionary Markings for Compressed Gas Containers, Appendix A, issued 1992 (6th Edition) | 172.400a
|
| CGA Pamphlet C–7 Guide to Preparation of Precautionary Labeling and Marking, 2004 (8th Edition) | 172.400a
|
| CGA Pamphlet C–8 Standard for Requalification of DOT–3HT Cylinder Design, 1985 | 171.7; 180.205; 180.209
|
| CGA Pamphlet C–11 Recommended Practices for Inspection of Compressed Gas Cylinders at Time of Manufacture, Third Edition, 2001 | 171.7; 178.35
|
| CGA Pamphlet C–12 Qualification Procedure for Acetylene Cylinder Design, 1994 | 171.7; 173.301; 173.303; 178.59; 178.60
|
| CGA Pamphlet C–13, Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders, 2000, Fourth edition | 171.7; 173.303; 180.205; 180.209
|
| CGA Pamphlet C–14, Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems, 1979 | 171.7; 173.301; 173.323
|
| CGA Pamphlet G–2.2 Tentative Standard Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia, 1985 | 173.315
|
| CGA Pamphlet G–4.1 Cleaning Equipment for Oxygen Service, 1985 | 178.338–15
|
| CGA Pamphlet P–20 Standard for Classification of Toxic Gas Mixtures, 1995 | 171.7; 173.115
|
| CGA Pamphlet S–1.1 Pressure Relief Device Standards–Part 1, 12th Edition, 2005 | 173.301, 173.304a, 178.75
|
| CGA Pamphlet S–1.1 Pressure Relief Device Standards Part 1—Cylinders for Compressed Gases (with the exception of paragraph 9.1.1.1), Ninth Edition, 2001 | 173.304a
|
| CGA Pamphlet S–1.1 Pressure Relief Device Standards Part 1—Cylinders for Compressed Gases (with the exception of paragraph 9.1.1.1), Eleventh Edition, 2003 | 171.7; 173.301; 178.75
|
| CGA Pamphlet S–1.2 Safety Relief Device Standards Part 2—Cargo and Portable Tanks for Compressed Gases, 1980 | 173.315; 173.318; 178.276; 178.277
|
| CGA Pamphlet S–7 Method for Selecting Pressure Relief Devices, 2005 | 173.301
|
| CGA Pamphlet S–7 Method for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders, 1996 | 171.7; 173.301
|
| CGA Technical Bulletin TB–2 Guidelines for Inspection and Repair of MC–330 and MC–331 Cargo Tanks, 1980 | 180.407; 180.413
|
Department of Defense
2461 Eisenhower Avenue, Alexandria, VA 22331
|
| DOD TB 700–2 NAVSEAINST 8020.8B; AFTO 11A–1–47; DLAR 8220.1: Explosives Hazard Classification Procedures, January 1998 | 173.56
|
| Packaging of Hazardous Material, DLAD 4145.41/AR 700–143/AFJI 24–210/NAVSUPINST 4030.55B/MCO 4030.40B, January 14, 2000 | 171.7; 173.7
|
Department of Energy (USDOE)
100 Independence Avenue, SW, Washington DC 20545. USDOE publications available from: Superintendent of Documents, Government Printing Office or The National Technical Information Service (NTIS)
|
| USDOE, CAPE—1662, Revision 1, and Supp. 1, Civilian Application Program Engineering Drawings, April 6, 1988 | 178.356–1; 178.356–2; 178.358–1; 178.358–2; 178.358–3; 178.358–4
|
| USDOE, Material and Equipment Specification No. SP–9 Rev. 1, and Supplement—Fire Resistant Phenolic Foam, March 28, 1968 | 178.356–2; 178.358–2
|
| USDOE, ORO–651—Uranium Hexafluoride: A Manual of Good Handling Practices, Revision 6, 1991 ed | 171.7; 173.417
|
| USDOE KSS–471, November 30, 1986—Proposal for Modifications to U.S. Department of Transportation Specification 21PF–1 Fire and Shock Resistant Phenolic Foam—Insulated Metal Overpack | 178.358–1; 178.358–3
|
General Services Administration
Specification Office, Rm. 6662, 7th and D St. SW., Washington, DC 20407
|
| Federal Specification RR–C–901D, Cylinders, Compressed Gas: Seamless, Shatterproof, High Pressure DOT 3AA Steel, and 3AL Aluminum, February 21, 2003 | 171.7; 173.302; 173.336; 173.337
|
Institute of Makers of Explosives (IME)
1120 19th Street, NW, Suite 310, Washington, DC 20036–3605
|
| IME Safety Library Publication No. 22 (IME Standard 22), Recommendation for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials, May 1993 | 173.63; 177.835
|
International Atomic Energy Agency (IAEA)
Wagramerstrasse 5, P.O. Box 100, A–1400, Vienna, Austria. Also available from: Bernan Associates, 4611–F Assembly Drive; Lanham, Maryland 20706–4391, USA; or Renouf Publishing Company, Ltd., 812 Proctor Avenue, Ogdensburg, New York 13669, USA
|
| IAEA No. TS–R–1, (ST–1, Revised) Regulations for the Safe Transport of Radioactive Material, 1996 Edition | 171.7; 171.22; 171.23; 171.26; 173.415; 173.416; 173.417; 173.473
|
International Civil Aviation Organization (ICAO)
P.O. Box 400, Place de l'Aviation Internationale, 1000 Sherbrooke Street West, Montreal, Quebec, Canada H3A 2R2. ICAO Technical Instructions also available from INTEREG, International Regulations, Publishing and Distribution Organization, P.O. Box 60105, Chicago, IL 60660
|
| ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air, (ICAO Technical Instructions) 2007–2008 Edition | 171.8; 171.22; 171.23; 171.24; 172.202; 172.401; 172.512; 172.602; 173.320; 175.33; 178.3
|
International Electrotechnical Commission
(IEC) 3, rue de Varemb[eacute], P.O. Box 131, CH—1211, GENEVA 20,
Switzerland
|
| IEC/PAS 62282–6–1:2006(E)—Fuel Cell Technologies—Part 6–1: Micro Fuel Cell Power Systems—Safety, First Edition, 2006–02, with Corrigendum 1, First Edition, 2007–04 | 175.10
|
International Maritime Organization
4 Albert Embankment, London SE1 7SR, England Telephone: 0171–587 3210; FAX: 0171–587 3210; Telex: 23588. Purchase from: IMO Sales, New York Nautical Instrument and Service Corp., 140 W. Broadway, New York, NY 10013.
|
| International Maritime Dangerous Goods Code (IMDG Code), 2006 Edition, Incorporating Amendment 33–06 (English Edition), Volumes 1 and 2 | 171.22; 171.23; 171.25; 172.202; 172.401; 172.502; 172.602; 173.21; 176.2; 176.5; 176.11; 176.27; 176.30; 178.3; 178.274
|
| International Convention for the Safety of Life at Sea, (SOLAS) Amendments 2000, Chapter II–2/Regulation 19, 2001 | 176.63; 176.84
|
International Organization for Standardization (ISO)
International Organization for Standardization (ISO), 1, ch. de la Voie-Creuse, Case postale 56, CH-1211 Geneva 20, Switzerland; Telephone +41 22 749 01 11; Fax +41 22 733 34 30; http://www.iso.org/iso/iso_catalogue.htm
Also available from: American National Standards Institute (ANSI), 25 West 43rd Street, 4th Floor, New York, NY 10036; phone: 1 (212) 642–4900; fax: 1 (212) 398–0023; http://webstore.ansi.org/ansidocstore/default.asp
|
| ISO TR 4826–1979(E), Sealed Radioactive Sources—Leak Test Methods | 173.469
|
| ISO 82–1974(E) Steel Tensile Testing | 178.270–3
|
| ISO 535–1991(E) Paper and Board—Determination of Water Absorptiveness—Cobb Method | 171.7; 178.516; 178.707; 178.708
|
| ISO 1496–1: 1990(E), Series 1 Freight Containers—Specification and Testing—Part 1, General Cargo Containers, Fifth Edition, August 15, 1990 | 171.7; 173.411
|
| ISO 1496–3: Series 1 Freight Containers—Specification and Testing—Part 3, Tank Containers for Liquids, Gases, and Pressurized Dry Bulk, Fourth Edition, March 1, 1995 | 171.7; 178.274; 178.74; 178.75
|
| ISO 2431–84(E) Standard Cup Method | 173.121
|
| ISO 2592–1973(E) Petroleum products—Determination of flash and fire points—Cleveland open cup method | 171.7; 173.120
|
| ISO 2919–1980(E), Sealed Radioactive Sources—Classification | 173.469
|
| ISO 3036–1975(E), Board—Determination of Puncture Resistance | 171.7; 178.708
|
| ISO 3574–1986(E) Cold–reduced carbon steel sheet of commercial and drawing qualities | 171.7; 178.503; Part 178, Appendix C
|
| ISO 3807–2 Cylinders for Acetylene—Basic requirements—Part 2: Cylinders with Fusible Plugs, First edition, March 15, 2000 | 171.7; 173.303; 178.71
|
| ISO 4126–1, Safety Valves, Part 1: General Requirements, First Edition, December 15, 1991 | 171.7; 178.274
|
| ISO 6406, Gas Cylinders—Seamless Steel Gas Cylinders—Periodic Inspection and Testing, Second edition, February 1, 2005 | 171.7; 180.207
|
| ISO 6892, Metallic Materials—Tensile Testing, First Edition, July 15, 1984 | 171.7; 178.274
|
| ISO 7225, Gas Cylinders—Precautionary Labels, (E), July 2005 | 178.71
|
| ISO 7225, Gas Cylinders—Precautionary Labels, First Edition, August 1995 | 171.7; 178.71
|
| ISO 7866, Gas Cylinders—Refillable Seamless Aluminum Alloy Gas Cylinders—Design, Construction and Testing, First Edition, June 15, 1999 | 171.7; 178.71
|
| ISO 9809–1, Gas Cylinders—Refillable Seamless Steel Gas Cylinders—Design, Construction and Testing—Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 Mpa, First Edition, June 1, 1999 | 171.7; 178.71; 178.75
|
| ISO 9809–2, Gas Cylinders—Refillable Seamless Steel Gas Cylinders—Design, Construction and Testing—Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 Mpa, First Edition, June 15, 2000 | 171.7; 178.71; 178.75
|
| ISO 9809–3, Gas Cylinders—Refillable Seamless Steel Gas Cylinders—Design, Construction and Testing—Part 3: Normalized Steel Cylinders, First Edition, December 15, 2000 | 171.7; 178.71; 178.75
|
| ISO 9978–3: 1992(E), Radiation Protection—Sealed Radioactive Sources—Leakage Test Methods, February 15, 1992, First Edition | 171.7; 173.469
|
| ISO 10297: Gas Cylinders—Refillable Gas Cylinder Valves—Specification and Type Testing, First edition, May 1, 1999 | 171.7; 173.301b, 178.71
|
| ISO 10461: Gas Cylinders—Seamless Aluminum–alloy Gas Cylinders—Periodic Inspection and Testing, Second edition, February 15, 2005 | 171.7; 180.207
|
| ISO 10462: Gas Cylinders—Transportable Cylinders for Dissolved Acetylene—Periodic Inspection and Maintenance, Second edition, February 15, 2005 | 171.7; 180.207
|
| ISO 11114–1: Transportable Gas Cylinders—Compatibility of Cylinder and Valve Materials with Gas Contents—Part 1: Metallic Materials, First edition, October 15, 1997 | 171.7; 173.301b; 178.71
|
| ISO 11114–2: Transportable Gas Cylinders—Compatibility of Cylinder and Valve Materials with Gas Contents—Part 2: Non–metallic Materials, First edition, December 15, 2000 | 171.7; 173.301b; 178.71
|
| ISO 11117: Gas Cylinders—Valve Protection Caps and Valve Guards for Industrial and Medical Gas Cylinders—Design, Construction and Tests, First edition, August 1, 1998 | 171.7; 173.301b
|
| ISO 11118: Gas Cylinders—Non–refillable Metallic Gas Cylinders—Specification and Test Methods, First edition, October 1, 1999 | 171.7; 178.71
|
| ISO 11119–1: Gas Cylinders of Composite Construction—Specification and Test Methods—Part 1: Hoop Wrapped Composite Gas Cylinders, First edition, May 15, 2002 | 171.7; 178.71
|
| ISO 11119–2: Gas Cylinders of Composite Construction—Specification and Test Methods—Part 2: Fully Wrapped Fibre Reinforced Composite Gas Cylinders with Load–sharing Metal Liners, First edition, May 15, 2002 | 171.7; 178.71
|
| ISO 11119–3: Gas Cylinders of Composite Construction—Specification and Test Methods—Part 3: Fully Wrapped Fibre Reinforced Composite Gas Cylinders with Non–load–sharing Metallic or Non–metallic Liners, First edition, September 15, 2002 | 171.7; 178.71
|
| ISO 11120: Gas Cylinders—Refillable Seamless Steel Tubes of Water Capacity between 150 L and 3 000 L—Design, Construction and Testing, First edition, March 15, 1999 | 171.7; 178.71; 178.75
|
| ISO 11621: Gas Cylinders—Procedures for Change of Gas Service, First edition, April 15, 1997 | 171.7; 173.302; 173.336; 173.337
|
| ISO 11623: Transportable Gas Cylinders—Periodic Inspection and Testing of Composite Gas Cylinders, First edition, March 1, 2002 | 171.7; 180.207
|
National Board of Boiler and Pressure Vessel Inspectors
1055 Crupper Avenue, Columbus, OH 43229
|
| National Board Inspection Code, A Manual for Boiler and Pressure Vessel Inspectors, NB–23, 1992 Edition | 171.1; 180.413
|
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
|
| NFPA Pamphlet No. 58—Liquefied Petroleum Gas Code, 2001 | 171.7; 173.315
|
National Motor Freight Traffic Association, Inc.
Agent, 1616 P Street NW., Washington, DC 20036
|
| National Motor Freight Classification NMF 100–I, 1982 | 177.841
|
National Technical Information Service (NTIS), Department of Commerce
5285 Port Royal Rd., Springfield, VA 22161
|
| NSB Handbook H–28 (1957), 1957 Handbook of Screw–Thread Standards for Federal Services, Part II, December 1966 Ed | 171.1; 179.2; 178.45; 178.46
|
Organization for Economic Cooperation and Development (OECD)
OECD Publications and Information Center, 2001 L Street, Suite 700, Washington, DC 20036
|
| OECD Guideline for Testing of Chemicals, No. 404, “Acute Dermal Irritation/Corrosion,” 1992 | 171.7; 173.137
|
Transport Canada
TDG Canadian Government Publishing Center, Supply and Services, Canada, Ottawa, Ontario, Canada K1A 0S9
|
| Transportation of Dangerous Goods (TDG) Regulations, August 2001 including Clear Language Amendments SOR/2001–286, Amendment 1 (SOR/2002–306) August 8, 2002; Amendment 2 (SOR/2003–273) July 24, 2003; Amendment 3 (SOR/2003–400) December 3, 2003; Amendment 4 (SOR/2005–216) July 13, 2005; and Amendment 5 (SOR/2005–279) September 21, 2005 | 171.12; 171.22; 171.23; 172.401; 172.502; 172.519; 172.602; 173.31; 173.32; 173.33
|
Truck Trailer Manufacturers Association
1020 Princess Street, Alexandria, VA 22314
|
| TTMA RP No. 61–98, Performance of Manhole and/or Fill Opening Assemblies on MC 306, DOT 406, Non–ASME MC 312, and non–ASME DOT 412 Cargo Tanks, June 1, 1998 | 171.7; 180.405
|
| TTMA RP No. 81–97, Performance of Spring Loaded Pressure Relief Valves on MC 306, MC 307, MC 312, DOT 406, DOT 407, and DOT 412 Tanks, July 1, 1997 Edition | 171.7; 178.345–10; 178.346–3
|
| TTMA TB 107 Procedure for Testing In–Service, Unmarked, and/or Uncertified MC 306 and non–ASME MC 312 Type Cargo Tank Manhole Covers, June 1, 1998 | 171.7; 180.405
|
United Nations
United Nations Sales Section, New York, NY 10017
|
| UN Recommendations on the Transport of Dangerous Goods, Fourteenth revised edition, 2005, Volumes I and II | 171.8; 171.12; 172.202; 172.401; 172.502; 173.22; 173.24; 173.24b; 173.40; 173.192; 173.197; 173.302b; 173.304b; 178.75; 178.274; 178.801
|
| UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fourth revised edition, 2003, and Addendum 2, 2004 | 172.102; 173.21; 173.56; 173.57; 173.58; 173.115; 173.124; 173.125; 173.127; 173.128; 173.137; 173.185; 173, Appendix H; 178.274
|
United States Enrichment Corporation, Inc.
6903 Rockledge Drive, Bethesda, Maryland 20817
|
| USEC 651: Good Handling Practices for Uranium Hexafluoride, Revision B, January 1999 | 171.7; 173.417 |
