46 CFR (PARTS 166–199)
COAST GUARD, DEPARTMENT OF HOMELAND SECURITY
| 46 CFR
|
American Boat and Yacht Council
3069 Solomon's Island Road, Edgewater, MD 21037
|
| P–1–73—Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines, 1973 | 169.115; 169.609; 169.703
|
| H–24.9 (g) and (h)—Fuel Strainers and Fuel Filters, 1975 | 169.115; 169.629
|
| H–2.5—Ventilation of Boats Using Gasoline—Design and Construction, 1981 | 169.115; 169.629
|
| A–1–78—Marine LPG—Liquefied Petroleum Gas Systems, 1978 | 169.115; 169.703
|
| A–3–70—Recommended Practices and Standards Covering Galley Stoves, 1970 | 169.115; 169.703
|
| A–22–78—Marine CHG—Compressed Natural Gas Systems, 1978 | 169.115; 169.703
|
| A–1–78 Marine LPG–Liquefied Petroleum Gas Systems, December 15, 1978 | 184.05–1
|
| A–1–93—Marine Liquefied Petroleum Gas (LPG) Systems | 184.240
|
| A–3–93—Galley Stoves | 184.200
|
| A–7–70—Boat Heating Systems | 184.200
|
| A–16–89—Electric Navigation Lights | 183.130
|
| A–22–78 Marine CNG–Compressed Natural Gas Systems, December 15, 1978 | 184.05–1
|
| A–22–93—Marine Compressed Natural Gas (CNG) Systems | 184.240
|
| E–8–94—Alternating Current (AC) Electrical Systems on Boats | 183.130
|
| E–9–90—Direct Current (DC) Electrical Systems on Boats | 183.130
|
| H–2–89—Ventilation of Boats Using Gasoline | 182.130; 182.460
|
| H–22–86—DC Electric Bilge Pumps Operating Under 50 Volts | 182.130; 182.500
|
| H–24–93—Gasoline Fuel Systems | 182.130; 182.440; 182.445; 182.450; 182.455
|
| H–25–94—Portable Gasoline Fuel Systems | 182.130; 182.458
|
| H–32–87—Ventilation of Boats Using Diesel Fuel | 182.130; 182.465; 182.470
|
| H–33–89—Diesel Fuel Sysems | 182.130; 182.440; 182.445; 182.450; 182.455
|
| P–1—Safe Installation of Exhaust Systems for Propulsion and Auxiliary Machinery, 1973 | 182.15–15; 182.15–20
|
| P–1–93—Installation of Exhaust Systems for Propulsion and Auxiliary Engines | 177.405; 177.410; 182.130; 182.425; 182.430
|
| P–4–89—Marine Inboard Engines | 182.130; 182.420
|
American Bureau of Shipping
Publications Department, 16855 Northchase Drive, Houston, Texas 77060
|
| Rules for Building and Classing Steel Vessels, 1981 | 167.15–27; 167.20–1
|
| Guide for Building and Classing High–Speed Craft, February, 1997 | 175.600; 177.300
|
| Rules for Building and Classing Aluminum Vessels, 1975 | 177.300
|
| Rules for Building and Classing Reinforced Plastic Vessels, 1978 | 177.300
|
| Rules for Building and Classing Steel Vessels, 1995 | 182.410; 183.360
|
| Rules for Building and Classing Steel Vessels Under 61 Meters (200 Feet) in Length, 1983 | 177.300
|
| Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways, 1995 | 177.300
|
| Rules for Building and Classing Steel Vessels, 1981 | 188.35–1; 189.15–1; 190.01–10; 190.01–15; 195.01–5
|
American National Standards Institute (ANSI)
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
|
| A 17.1–1984, including supplements A17.1a–1985 and A17.1b–1985—Safety Code for Elevators and Escalators | 183.540
|
| B 31.1–1986—Code for Pressure Piping, Power Piping | 182.710
|
| Z 26.1–1977, including 1980 supplement—Safety Glazing Materials For Glazing Motor Vehicles Operating on Land Highways | 177.1030
|
| ANSI B31.1–80 Power Piping | 197.204; 197.205; 197.336
|
| ANSI/ASME PVHO 1 Safety Standard for Pressure Vessels for Human Occupancy, 1981 | 197.204; 197.205; 197.300; 197.328
|
| ANSI Z 88.2–80 Practices for Respiratory Protection | 197.550
|
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
|
| Boiler and Pressure Vessel Code, Section VIII, 1980 | 197.204; 197.205; 197.300; 197.310; 197.328
|
| ASME/ANSI B31.3 Process Piping, 1996, including 1996 Addenda | Appendix A to part 193
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
|
| ASTM A 53–96 Standard Specification for Pipe, Steel, Black and Hot–Dipped, Zinc–Coated Welded and Seamless | Appendix A to part 192; 195.3
|
| ASTM A 106–95 Standard Specification for Seamless Carbon Steel Pipe for High–Temperature Service | Appendix A to part 192; 195.3
|
| ASTM B 96–93, Standard Specification for Copper–Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | 175.600; 182.440
|
| ASTM B 97–77 Copper–Silicon Alloy Plate, Sheet, Strip and Rolled Bar for General Purposes | 182.15–25
|
| ASTM B 117–73 (Reapproved 1979)—Method of Salt Spray (Fog) Testing | 175.400
|
| ASTM B 117–97, Standard Practice for Operating Salt Spray (Fog) Apparatus | 175.400; 175.600
|
| ASTM B 122–79 Copper–Nickel Zinc Alloy (Nickel Silver) and Copper–Nickel Alloy Plate, Strip, and Rolled Bar | 182.15–25
|
| ASTM B 122/B 122 M–95, Standard Specification for Copper–Nickel–Tin Alloy, Copper–Nickel–Zinc Alloy (Nickel Silver), and Copper–Nickel Alloy Plate, Sheet, Strip, and Rolled Bar | 175.600; 182.440
|
| ASTM B 127–80a Nickel–Copper Alloy (UNS NO4400) Plate, Sheet and Strip | 182.15–25; 182.20–25
|
| ASTM B 127–98, Standard Specification for Nickel–Copper Alloy (UNS NO4400) Plate, Sheet, and Strip | 175.600; 182.440
|
| ASTM B 152–79 Copper, Sheet, Strip, Plate and Rolled Bar | 182.15–25
|
| ASTM B 152–97a, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | 175.600; 182.440
|
| ASTM B 209–81 Aluminum Alloy Sheet and Plate | 182.15–25; 182.20–25
|
| ASTM B 209–96, Standard Specification for Aluminum and Aluminum–Alloy Sheet and Plate | 175.600; 182.440
|
| ASTM D 93–80 Test for Flash Point by Pennsky–Martens Closed Tester | 182.15–1; 182.20–1
|
| ASTM D 93–94, Flash Point by Pensky–Martens Closed Cup Tester | 175.400; 199.05; 199.261; 199.290
|
| ASTM D 93–97, Standard Test Methods for Flash Point by Pensky–Martens Closed Cup Tester | 175.400; 175.600; 199.05; 199.261; 199.290
|
| ASTM D 323–79 Test for Vapor Pressure of Petroleum Products (Reid Method) | 188.10–21
|
| ASTM D 635–91 Rate of Burning and/or Extent and Time of Burning of Self–Supporting Plastics in a Horizontal Position | 182.440
|
| ASTM D 635–97, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | 175.600; 182.440
|
| ASTM D 638–96 Standard Test Method for Tensile Properties of Plastics | Appendix A to part 192
|
| ASTM D 2513–96a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings | Appendix A to part 192
|
| ASTM D 2863–95, Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle–like Combustion of Plastics (Oxygen Index) | 175.600; 182.440
|
| ASTM D 2863–91 Measuring the Minimum Oxygen Concentration to Support Candle–like Combustion of Plastics (Oxygen Index) | 182.440
|
| ASTM E 84–94 Surface Burning Characteristics of Building Materials | 177.410
|
| ASTM E 84–98, Standard Test Method for Surface Burning Characteristics of Building Materials | 175.600; 177.410
|
| ASTM F 1003, Standard Specification for Searchlights on Motor Lifeboats, 1986 (Reapproved 1992) | 199.05; 199.175
|
| ASTM F 1003–86 (1992), Standard Specification for Searchlights on Motor Lifeboats | 199.05; 199.175
|
| ASTM F 1014–86 Standard Specification for Flashlights on Vessels | 192.20–15(j); 195.35–5(c)(2); 199.05; 199.175
|
| ASTM F 1014–92, Standard Specification for Flashlights on Vessels | 195.01–3; 195.35–5; 199.05; 199.175
|
| ASTM F 1121–87 (1993), Standard Specification for International Shore Connections for Marine Fire Applications | 193.01–3; 193.10–10
|
| ASTM F 1121–87 International Shore Connections for Marine Fire Applications | 193.10
|
| ASTM F 1196–89, Sliding Watertight Door Assemblies | 170.270; 174.100; 190.01
|
| ASTM F 1196–94, Standard Specification for Sliding Watertight Door Assemblies | 170.015; 170.270; 174.007; 174.100
|
| ASTM F 1197–89 (1994), Standard Specification for Sliding Watertight Door Control Systems | 170.015; 170.270; 174.007; 174.100
|
| ASTM F 1197–89 Sliding Watertight Door Control Systems | 190.01
|
| ASTM F 1546–94 Standard Specification for Fire Hose Nozzles | 167.027–3
|
Coast Guard
Commandant [G–MVI], 2100 2nd St. SW., Washington, DC 20593
|
| 160.014 “Compass and Mounting dated Dec. 14, 1944” (Specification for Compasses: Magnetic, Liquid–filled, Mariners, Compensating, for Lifeboats (with mounting) for Merchant Vessels),1944 | 192.20–15
|
Department of Defense
DODSSP Standarization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 19111–5098
|
| Federal specifications:
|
| ZZ–H–451 Hose, Fire, Woven–Jacketed Rubber or Cambric–lined, with Couplings, F | 167.45–5; 169.115; 169.563; 181.15–10; 193.10–10
|
| NAVSEA Cable Comparison Guide, 1975 | 183.10–20
|
| BB–N–411 Nitrogen, Technical, C | 197.340
|
| BB–O–925 Oxygen, Technical, Gas and Liquid, A | 197.340
|
| Military Specifications:
|
| MIL–P–21929B; Plastic Material, Cellular Polyurethane, Foam in Place, Rigid (1970) | 170.245
|
| MIL–R–21607E (SH); Resins, Polyester, Low Pressure Laminating, Fire–Retardant, May 25, 1990 | 175.600; 177.410
|
| MIL–P–21929B (1970)—Plastic Material, Cellular Polyurethane, Foam–in–Place, Rigid (2 and 4 pounds per cubic foot) | 179.240
|
| MIL–P–21929C; Plastic Material, Cellular Polyurethane, Foam in Place, Rigid (1991) (including Amendment 1, dated May 27, 1994) | 175.600; 179.240
|
Institute of Electrical and Electronic Engineers (formerly American Institute of Electrical Engineers)
Service Center, 445 Hoes Lane, Piscataway, NJ 08855 Telephone: (800) 678–4333
|
| 45—Recommended Practice for Electrical Installations on Shipboard, 1977 | 167.25–1; 167.40–1; 183.01–15; 183.05–45; 183.10–10; 183.340
|
International Maritime Organization
4 Albert Embankment, London SE1 7SR, England Telephone: 0171–587 3210; FAX: 0171–587 3210; Telex: 23588. Purchase from: IMO Sales, New York Nautical Instrument and Service Corp., 140 W. Broadway, New York, NY 10013. Telephone: (212) 962–4522; FAX: (212) 406–8420
|
| IMO “International Maritime Dangerous Goods (IMDG) Code, 1994 Consolidated Edition, as amended by Amendment 28 (1996) (English edition)” | 171.12; 172.401; 172.407
|
| Resolution A.264(VIII) Amendment to Chapter VI of the International Convention for the Safety of Life at Sea, 1960, November 20, 1973 | 172.015; 172.020
|
| Resolution A.265 (VIII) | 170.135, 171.075, 171.082
|
| Resolution MSC.23 (59) Publication No. 240–E, International Code for the Safe Carriage of Grain in Bulk, 1991 | 172.015; 172.020
|
| Resolution A.520(13), Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life–Saving Appliances and Arrangements, dated November 17, 1983 | 175.540
|
| Resolution A.649(16), Code for the Construction and Equipment of Mobile Offshore Drilling Units (MODU Code), October 19, 1989 with Amendments of June, 1991 | 181.108; 181.503
|
| Resolution A.658(16), Use and Fitting of Retro–Reflective Materials on Life–Saving Appliances, dated November 20, 1989 | 185.604
|
| Resolution A.688(17), Fire Test Procedures For Ignitability of Bedding Components, dated November 6, 1991 | 177.405
|
| Resolution A.760(18), Symbols Related to Life–Saving Appliances and Arrangements, dated November 17, 1993 | 185.604(g)
|
| MSC Circular 699, Revised Guidelines for Passenger Safety Instructions, 17 July, 1995 | 199.05; 199.217
|
| Resolution A.520(13), Code of Practice for the Evaluation, Testing, and Acceptance of Prototype Novel Life–Saving Appliances and Arrangements, 19 November, 1983 | 199.05; 199.40
|
| Resolution A.657(16), Instructions for Action in Survival Craft, 19 October, 1989 | 199.05; 199.175
|
| Resolution A.658(16), Use and Fitting of Retro–reflective Materials on Life–Saving Appliances, 20 November, 1989 | 199.05; 199.70; 199.176
|
| Resolution A.760(18), Symbols Related to Life–Saving Appliances and Arrangements, 17 November, 1993 | 199.05; 199.70; 199.90
|
| Resolution MSC.4(48), International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (IBC Code), 1994 | 199.05; 199.30; 199.280
|
| Resolution MSC.5(48), International Code for the Construction and Equipment of Ships Carrying Liquified Gases in Bulk (ICG Code), 1993 | 199.05; 199.30; 199.280
|
Lloyd's Register of Shipping
17 Battery Place, Suite 1013, New York, NY 10004
|
| Rules and Regulations for the Classification of Yachts and Small Craft, as amended through 1983 | 177.300
|
Manufacturers Standardization Society of the Valve and Fittings Industry, Inc.
127 Park Street NW., Vienna, VA 22180
|
| MSS SP44–96 Steel Pipe Line Flanges | Appendix A to part 192
|
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
|
| 70—National Electrical Code, 1980 | 169.115; 169.672
|
| 302—Pleasure and Commercial Motor Craft Chapter 6, 1980 | 169.115; 169.703
|
| 306—Control of Gas Hazards on Vessels, 1980 | 167.30–1; 169.115; 169.236
|
| NFPA 10–1994—Portable Fire Extinguishers | 176.810
|
| NFPA 17–1994—Dry Chemical Extinguishing Systems | 181.425
|
| NFPA 17A–1994—Wet Chemical Extinguishing Systems | 181.425
|
| NFPA 70—National Electrical Code, 1980 | 183.01–10; 183.05–45; 183.05–50; 183.10–20
|
| NFPA 70–1993—National Electrical Code (NEC) | 183.370
|
| Section 250–95 | 183.370
|
| Section 310–13 | 183.340
|
| Section Section 310–15 | 183.340
|
| Article 430 | 183.320
|
| Article 445 | 183.320
|
| NFPA 302—Pleasure and Commercial Motor Craft, 1989 | 184.05–1
|
| NFPA 302–1994—Pleasure and Commercial Motor Craft, Chapter 6 | 184.200; 184.200
|
| NFPA 306–1993—Control of Gas Hazards on Vessels | 176.710
|
| NFPA 1963–1989—Fire Hose Connections | 181.320
|
| NFPA 30 Flammable and Combustible Liquids Code, 1996 | Appendixes A to part 192 and 193
|
| NFPA306—Control of Gas Hazards on Vessels (Formerly “Control of Gas Hazards on Vessels to be Repaired”), 1975 | 189.50–1
|
National Institute of Standards and Technology (formerly National Bureau of Standards)
c/o Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, Telephone 202–512–1800
|
| Special Pub. 440 (SD Cat. No. C13, 10.490) Color: Universal Language and Dictionary of Names, 1976 | 169.115
|
Society of Automotive Engineers (SAE)
400 Commonwealth Dr., Warrendale, PA 15096–0001, Telephone: (412) 776–4841
|
| SAE J–1475—Hydraulic Hose Fittings For Marine Applications, 1984 | 182.720
|
| SAE J–1928—Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications, August 1989 | 182.415
|
| SAE J–1942—Hose and Hose Assemblies for Marine Applications, 1992 | 182.720
|
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
|
| UL 19–78 Woven–jacketed Rubber Lined Fire Hose | 167.45–5; 169.115; 169.563
|
| UL 19–78 Woven–Jacketed, Rubber Lined Fire Hose | 181.15–10
|
| UL 19–1992—Lined Fire Hose and Hose Assemblies | 181.320
|
| UL 174–1989, as amended through June 23, 1994—Household Electric Storage Tank Water Heaters | 182.320
|
| UL 197–78 (Revisions through 1979) Commercial Electric Cooking Appliances | 183.01–15; 183.10–45
|
| UL 217–1993—Single and Multiple Station Smoke Detectors | 181.450
|
| UL 486A–1992—Wire Connectors and Soldering Lugs For Use With Copper Conductors | 183.340
|
| UL 489–1995—Molded—Case Circuit Breakers and Circuit Breaker Enclosures | 183.380
|
| UL 595–74 (Revisions through 1980) Marine Type Electric Lighting Fixtures | 183.01–15
|
| UL 595–1991—Marine Type Electric Lighting Fixtures | 183.410
|
| UL 710–1990, as amended through Sept. 16, 1993—Exhaust Hoods for Commercial Cooking Equipment | 181.425
|
| UL 1058–1989, as amended through April 19, 1994—Halogenated Agent Extinguishing System Units | 181.410
|
| UL 1102–80 Non Integral Marine Fuel Tanks | 182.15–25
|
| UL 1102–1992—Non integral Marine Fuel Tanks | 182.440
|
| UL 1110–1988, as amended through May 16, 1994—Marine Combustible Gas Indicators | 182.480
|
| UL 1111–1988—Marine Carburetor Flame Arresters | 182.415
|
| UL 1453–1988, as amended through June 7, 1994—Electric Booster and Commercial Storage Tank Water Heaters | 182.320
|
| UL 1570–1995—Fluorescent Lighting Fixtures | 183.410
|
| UL 1571–1995—Incandescent Lighting Fixtures | 183.410
|
| UL 1572–1995—High Intensity Discharge Lighting Fixtures | 183.410
|
| UL 1573–1995—Stage and Studio Discharge Lighting Units | 183.410
|
| UL 1574–1995—Track Lighting Systems | 183.410(c)
|
| UL 19–71 Woven Jacketed, Rubber Lined Fire Hose | 193.10–10 |
