46 CFR (PARTS 156–165)
COAST GUARD, DEPARTMENT OF HOMELAND SECURITY
|
American Bureau of Shipping
Publications Department, 16855 Northchase Drive, Houston, Texas 77060
|
Rules for Building and Classing Steel Vessels, 1996 | 161.002–1; 161.002–4(b)
|
American Society of Mechanical Engineers
Service Center, 22 Law Drive, P.O. Box 2900, Fairfield, NJ 07007, Telephone (610) 832–9585, FAX (610) 832–9555
|
Boiler and Pressure Vessel Code:
|
Section I—par. PG–67 to 72 Design and Construction, and Tests 1977–1979 | 162.001–1
|
Par. PG–69—Testing 1977–1979 | 162.001–1
|
Par. PG–71—Mounting 1977–1979 | 162.001–1
|
Par. PG–110—Stamping of Safety Valves 1977–1979 | 162.001–1
|
Section IV—par. HG–402 Discharge Capacities of Safety and Safety Relief Valves, 1980 | 162.012–1; 162.013–1
|
Section VIII—Par. UG–131 Certification of Capacity for Pressure Relief Valves, 1980 | 162.018–1
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
|
ASTM A 27/ A 27 M–95, Standard Specification for Steel Castings, Carbon, for General Application | 160.032–1; 160.032–3
|
ASTM A 27–80 Mild to Medium Strength Carbon Steel Castings | 160.032–1
|
ASTM A 36–77 Structural Steel | 160.035–1
|
ASTM A 36/A 36 M–97a, Standard Specification for Carbon Structural
Steel | 160.032–1; 160.032–3; 160.035–1; 160.035–3
|
ASTM A 216–77 Carbon–Steel Casting Suitable for Fusion Welding for High Temperature Service | 160.032–1
|
ASTM A 216/A 216 M–93 (1998), Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding for High Temperature Service | 160.032–1; 160.032–3
|
ASTM A 525–80 Steel Sheets, Zinc–Coated (Galvanized) by the Hot Dip Process | 160.035–1
|
ASTM A 653/A 653M–98, Standard Specification for Steel Sheet, Zinc–Coated (Galvanized) or Zinc–Iron Alloy–Coated (Galvannealed) by the Hot–Dip Process | 160.035–1; 160.035–3
|
ASTM B 61–80 Steam or Valve Bronze Castings | 162.014–1
|
ASTM B 117–73 Method of Salt Spray (Fog) Testing | 160.171–3; 161.004–1; 161.006–1
|
ASTM B 117–73 (reapproved 1979) Standard Method of Salt Spray (Fog) Testing | 160.176–8; 160.176–13
|
ASTM B 117–95 Standard Practice for Operating Salt Spray (Fog) Apparatus | 161.002–1; 161.002–4(b)
|
ASTM B 117–97, Standard Practice for Operating Salt Spray (Fog) Apparatus | 160.077–5; 160.077–11; 160.171–3; 160.171–17; 160.176–4; 160.176–8; 160.176–13; 161.002–1; 161.002–4; 161.006–1; 161.006–5
|
ASTM B 456–95, Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium | 161.006–1; 161.006–4
|
ASTM C 177–76 Standard Test Method for Steady State Thermal Transmission Properties by Means of the Guarded Hot Plate | 160.171–3; 160.174–3
|
ASTM C 177–85 (1993), Standard Test Method for Steady–State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded–Hot–Plate Apparatus | 160.171–3; 160.171–17; 160.174–3; 160.174–17
|
ASTM C 518–76 Standard Test Method for Steady State Thermal Transmission Properties by Means of the Heat Flow Meter | 160.171–3; 160.174–3
|
ASTM C 518–91, Standard Test Method for Steady–State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | 160.171–3; 160.171–17; 160.174–3; 160.174–17
|
ASTM D 413–76 Adhesion of Vulcanized Rubber (Friction Test) | 160.055–1
|
ASTM D 413–82 (1993), Standard Test Methods for Rubber Property–Adhesion to Flexible Substrate | 160.055–1; 160.055–3
|
ASTM D 570–77 Water Absorbtion of Plastics | 160.055–1
|
ASTM D 570–95, Standard Test Method for Water Absorption of Plastics | 160.055–1; 160.055–3
|
ASTM D 751–79 Standard Methods of Testing Coated Fabrics | 160.076–25
|
ASTM D 751–95, Standard Test Methods for Coated Fabrics | 160.076–11; 160.076–25; 160.077–5; 160.077–19; 160.176–4; 160.176–13
|
ASTM D 882–75 Tensile Properties of Thin Plastic Sheeting | 160.055–1; 160.071–3
|
ASTM D 882–97, Standard Test Method for Tensile Properties of Thin Plastic Sheeting | 160.055–1; 160.055–3
|
ASTM D 975–81 Standard Specification for Diesel Fuel Oils | 160.171–3; 160.174–3
|
ASTM D 975–98, Standard Specification for Diesel Fuel Oils | 160.171–3; 160.171–17; 160.174–3; 160.174–17; 160.176–4; 160.176–13
|
ASTM D 1004–66 Tear Resistance of Plastic Film and Sheeting | 160.055–1; 160.171–3; 160.174–3
|
ASTM D 1004–94a, Standard Test Method for Initial Tear Resistance of Plastic
Film and Sheeting | 160.055–1; 160.055–3; 160.171–3; 160.171–17; 160.174–3; 160.174–17
|
ASTM D 1434–75 Gas Transmission Rate of Plastic Film and Sheeting | 160.076–25
|
ASTM D 1434–82 (1988), Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting | 160.076–11; 160.076–25; 160.077–5; 160.077–19; 160.176–4; 160.176–13
|
ASTM D 1435–75 Standard Recommended Practice for Outdoor Weathering of Plastics | 163.003–1
|
ASTM D 1435–94, Standard Practice for Outdoor Weathering of Plastics | 163.003–3
|
ASTM D 1518–77 Thermal Transmittance of Textile Materials Between Guarded Hot–Plate and Cool Atmosphere | 160.174–3
|
ASTM D 1518–85 (1990), Standard Test Method for Thermal Transmittance of Textile Materials | 160.174–3; 160.174–17
|
ASTM D 1571–77 Cloth Woven Asbestos | 164.009–3
|
ASTM D 2777–98, Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D–19 on Water | 162.050–4; 162.050–15
|
ASTM D 3574–77 Flexible Cellular Materials—Slab Bonded and Molded Urethane Foam, Testing | 164.031–1
|
ASTM D 4986–98, Standard Test Method for Horizontal Burning Characteristics
of Cellular Polymeric Materials | 164.015–1
|
ASTM E 84–80 Standard Test Method for Surface Burning Characteristics of Building Materials | 164.012–1
|
ASTM E 84–98, Standard Test Method for Surface Burning Characteristics of Building Materials | 164.012–1
|
ASTM E 119–80 Fire Testing of Building Construction and Materials | 164.007–1; 164.008–1
|
ASTM E 119–98, Standard Test Methods for Fire Tests of Building Construction and Materials | 164.007–1; 164.008–1
|
ASTM F 1014–86 Standard Specification for Flashlights on Vessels | 160.051–7(c)(4), (d)(4); 160.151–21
|
ASTM F 1014–92, Standard Specification for Flashlights on Vessels | 160.151–5; 160.151–21
|
ASTM F 1546 M–96, Standard Specification for Firehose Nozzles | 162.027–1; 162.027–2; 162.027–3
|
Coast Guard
Commandant [G–MVI], 2100 Second St. SW., Washington, DC 20593
|
DWG No. F–49–6–1 Life Preserver, Kapok, Adult | 160.002–1
|
DWG No. F–49–6–5 Life Preserver, Kapok, Child | 160.002–1
|
DWG No. 160.005–1 Life Preserver, Fibrous Glass, Adult and Child (Jacket Type) | 160.005–1
|
DWG No. 160.009 Cork and Balsa Wood Ring Life Buoy; arrangement and construction details | 160.009–1
|
DWG No. 160.013–1 Hatchet (Lifeboat and Liferaft) | 160.013–1
|
DWG No. 160.027–4 Rectangular Balsa Wood Life Float with Platform, Net and Rigging | 160.027–1
|
DWG No. 160.043–1(b) Jackknife (with Can Opener) | 160.043–1
|
DWG No. 160.047–1 Buoyant Vest, Kapok or Fibrous Glass, Adult and Child | 160.047–1
|
DWG No. 160.048–1 Buoyant Cushion, Fibrous Glass | 160.048–1
|
DWG No. 160.049–1 Buoyant Cushion, Plastic Foam | 160.049–1
|
DWG No. 160.052–1 Buoyant Vest, Unicellular Plastic Foam, Adult and Child | 160.052–1
|
DWG No. 160–055–1A Life Preservers, Unicellular Plastic Foam, Adult | 160.055–1
|
DWG No. 160.055–1B Life Preservers, Unicellular Foam, Child | 160.055–1
|
DWG No. 160.060–1 Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child | 160.060–1
|
DWG No. 164.013–1 Pattern, Trigonal Slit, for Polyethylene Foam Slab Material | 164.013–1
|
Compressed Gas Association
1725 Jefferson Davis Highway, Suite 1004, Arlington, VA 22202
|
S–1.2.5.2—Flow Tests of Safety Relief Valves (Pamphlet 1.2, para. 5.2), 1979 | 162.018–1
|
Factory Mutual Engineering and Research (FMER)
ATTN: Librarian, 1151 Boston–Providence Turnpike, Norwood, MA 02062
|
Class Number 3150, Audible Signal Devices, December 1974 | 161.002–1; 161.002–4(b)
|
Class Number 3210, Thermostats for Automatic Fire Detection, July 1978 | 161.002–1; 161.002–4(b)
|
Class Number 3230–3250, Smoke Actuated Detectors for Automatic Fire Alarm Signaling, February 1976 | 161.002–1; 161.002–4(b)
|
Class Number 3260, Flame Radiation Detectors for Automatic Fire Alarm Signaling, September 1994 | 161.002–1; 161.002–4(b)
|
Class Number 3820, Electrical Utilization Equipment, September 1979 | 161.002–1; 161.002–4(b)
|
Federal Aviation Administration, Technical Standard Order
Policy and Procedure Br., AWS–110, Aircraft Engineering Division, Office of Airworthiness, 800 Independence Ave. SW., Washington, DC 20591
|
TSO–C13d, Federal Aviation Administration Standard for Life Preservers, January 3, 1983 | 160.176–8
|
International Electrotechnical Commission (IEC)
Bureau Central de la Commission Electrotechnique Internationale, 1 rue de Varembe, Geneva, Switzerland
|
IEC 533 Electromagnetic Compatibility of Electrical and Electronic Installations in Ships. 1977 | 161.002–1; 161.002–4(b)
|
International Maritime Organization (IMO)
4 Albert Embankment, London SE1 7SR, England Telephone: 0171–587 3210; FAX: 0171–587 3210; Telex: 23588. Purchase from: IMO Sales, New York Nautical Instrument and Service Corp., 140 W. Broadway, New York, NY 10013. Telephone: (212) 962–4522; FAX: (212) 406–8420
|
International Convention for the Safety of Life at Sea, 1974 (SOLAS 74) Consolidated Edition, (including 1992 Amendment to SOLAS 74, 1994 Amendments to SOLAS 74), 1992 | 161.002–1; 161.002–4(b)
|
IMO Resolution A.657(16), Instructions for Action in Survival Craft, dated October 1989 | 160.151–21
|
IMO Resolution A.658(16), Use and Fitting of Retro–Reflective Materials on Life–Saving Appliances, dated November 1989 | 160.151–15; 160.151–57
|
IMO Resolution A.689(17), Recommendation on Testing of Life–Saving Appliances, dated November, 1991 with amendments | 160.151–21; 160.151–27; 160.151–31; 160.151–57
|
Lloyd's Register of Shipping
ATTN: Publication, 17 Battery Place, New York, NY 10004–1195
|
LR Type Approval System; Test Specification Number 1, 1990 | 161.002–1; 161.002–4(b)
|
National Fire Protection Agency
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
|
NFPA 72 National Fire Alarm Code, 1993 | 161.002–1; 161.002–4(b)
|
NFPA 255 Method of Test of Surface Burning Characteristics of Building Materials, 1972 | 164.012–1
|
National Institute of Standards and Technology (formerly National Bureau of Standards)
C/O Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, Telephone 202–512–1800
|
Special Pub. 440 (SD Cat. No. C13.10:440) Color: Universal Language and Dictionary of Names, 1976 | 160.010–1; 160.021–1; 160.022–1; 160.024–1; 160.036–1; 160.037–1; 160.057–1; 160.151–15; 160.171–3; 160.174–3; 160.176–9
|
Department of Defense
DODSSP Standardization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 19111–5098
|
Federal Specifications:
|
C–C–91 Candle, Illuminating, D | 164.015–1
|
CCC–C–426 Cloth, Cotton Drill, D | 160.048–1; 160.049–1; 160.055–1; 164.018–5
|
CCC–C–443 Cloth, Cotton, Duck, Plied Filling Yarns, Flat, E, and Amdt. 1 | 160.009–1, 164.018–5
|
CCC–C–700 Cloth, Coated, Vinyl (Artificial Leather), G | 160.048–1; 160.049–1; 160.055–1
|
GG–K–391 Kits (Empty), First Aid, Burn Treatment and Snakebite; and kit contents, A, and Amdt. 4 | 160.041–1
|
GGG–A–926 Axes, C, and Amdt. 2 | 160.013–1
|
HH–M–351 Millboard, Asbestos, E, and Amdt. 2 | 164.009–3
|
L–P–375 Plastic Film, Flexible, Vinyl Chloride, C, and Amdt. 3 | 160.002–1; 160.005–1; 160.047–1; 160.048–1; 164.018–1
|
L–P–390 Plastic Molding and Extrusion Materials, Polyethylene and Copolymers (Low, Medium, and High Density), C, and Amdt. 1 | 161.010–1
|
L–P–393 Plastic Molding Material Polycarbonate, Injection and Extrusion, A, and Amdt. 2 | 161.010–1
|
L–S–300 Sheeting and Tape, Reflective: Non–exposed Lens, Adhesive Backing, B | 164.018–5
|
QQ–B–611 Brass, Commercial; Bars, plates, rods shapes, Sheets and Strip, A | 161.006–1
|
QQ–I–706 Iron and Steel; Sheet, tinned (Tinplate), A, and Amdt. 1 | 160.061–1
|
QQ–W–423 Wire, Steel, Corrosion–resisting, B | 160.061–1
|
T–R–605 Rope, Manila and Sisal, B, and Amdt. 3 | 160.009–1; 160.028–1; 160.031–1
|
TT–E–489 Enamel, Alkyd, Gloss (for Exterior and Interior Surfaces), G | 161.001–1; 161.010–1
|
TT–P–59 Paint, Ready–mixed, International Orange (not for Residential Use), E, and Amdt. 1 | 160.035–1
|
V–T–285 Thread, Polyester, D | 160.001–1
|
V–T–285E, Thread, Polyester, August 21, 1986 | 164.023–5
|
V–T–295 Thread, Nylon, D | 160.001–1
|
V–T–295E, Thread, Nylon, August 1, 1985 | 164.023–5
|
VV–G–671 Grease; Lubricating, Graphite, E | 161.001–1
|
W–B–101 Batteries and Cells; Dry, H | 161.008–1; 161.010–1
|
WW–C–621 Couplings; Hose, Cotton (Rubberlined) and Linen (Unlined), E, and Amdt. 1 | 162.027–1
|
Federal Standards and Test Method Standards:
|
No. 141 Paint, Varnish, Lacquer, and Related Materials; Methods of Inspection, Sampling, and Testing, A | 164.018–5
|
No. 151 Metals, Test Methods, B, and Notice 2 | 160.062–1
|
No. 191 Textiles, Test Methods, A | 160.002–1; 160.005–1; 160.047–1; 160.052–1; 160.055–1; 160.060–1; 160.171–3
|
No. 191A (dated July 20, 1978) the following methods:
|
(1) Method 5100, Strength and Elongation, Breaking of Woven Cloth; Grab Method | 160.076–25; 160.176–13
|
(2) Method 5132, Strength of Cloth, Tearing; Falling–Pendulum Method | 160.076–25; 160.176–13
|
(3) Method 5134, Strength of Cloth, Tearing; Tongue Method | 160.076–25; 160.176–13
|
(4) Method 5804.1, Weathering Resistance of Cloth; Accelerated Weathering Method | 160.176–8
|
(5) Method 5762, Mildew Resistance of Textile Materials; Soil Burial Method | 160.176–8
|
(6) Method 4010, Length–Weight Relation; Thread; Yards Per Pound (m/kg) | 164.023–11
|
(7) Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand | 164.023–7
|
(8) Method 5804, Weathering Resistance of Cloth; Accelerated Weathering Method | 164.023–7
|
No. 370 Instrumental Photometric Measurements of Retroflective Materials and Retroflective Devices, 1977 | 164.018–1
|
No. 595 Colors, A, and Notice 5 | 160.050–1; 160.055–1
|
No. 751a, Stitches, Seams, and Stitchings (January 25, 1965) | 160.002–1; 160.005–1; 160.009–1; 160.047–1; 160.048–1; 160.048–1; 160.052–1; 160.055–1; 160.060–1; 160.171–3; 160.176–9
|
No 751a, Stitches, Seams, and Stitchings, Class 300 Lockstitch and Class 700 Single Lockstitch | 160.174–3(b)
|
Military Specifications:
|
MIL–B–18 Batteries, Dry, D, and Amdt. 2 | 161.001–1; 161.010–1
|
MIL–B–2766 Batt, Fibrous Glass, Lifesaving Equipment, B, and Interim Amdt. 1 | 160.005–1; 160.047–1; 160.048–1
|
MIL–B–16444 Bronze, Hydraulic (ounce metal): castings, A, and Notice 1 | 160.027–1
|
MIL–C–17415 Cloth, Coated and Webbing, Inflatable Boat and Miscellaneous Use, E, and Amdt. 1 | 160.051–1; 164.018–1; 160.151–15
|
MIL–C–43006 Cloth Laminated, Vinyl–Nylon, High Strength, Flexible, E | 160.049–1; 160.055–1; 164.018–5
|
MIL–D–3716 Dessicants (Activated) for Dynamic Dehumidification, A, and Amdt. 2 | 161.001–1
|
MIL–D–5531 Desalter Kit Sea water Mark Q, E | 160.058–1
|
MIL–E–15090 Enamel, equipment, light gray (Formula No. 111), B, and Amdt. 2 | 160.026–1
|
MIL–F–859 Fuel Oil, Boiler, E and Amdt. 2 | 164.015–1; 164.016–1
|
MIL–I–16923 Insulating Compound, Electrical Embedding, G, and Amdt. 1 | 161.010–1
|
MIL–L–1204 Lamp, Safety, Flame, B | 160.016–1
|
MIL–L–2648 Light, Marker, Distress, Floating Automatic Nonmagnetic, D, and Amdt. 2 | 161.001–1
|
MIL–L–7178 Lacquer, Cellulose Nitrate, Glass for Aircraft Use, A, and Amdt. 1 | 160.026–1
|
MIL–L–17653A Life Preserver, Vest, Work Type, Unicellular Plastic, B, and Amdt. 3 | 160.053–1
|
MIL–L–19496 (ships) Lifeboat, CO2 Inflatable Mark 5, Mod 1, 15–person Capacity, D, and Amdt. 1 | 160.051–1
|
MIL–L–24611 Life Preserver Support Package For Life Preserver, MK 4, dated May 18, 1982 | 160.176–8
|
MIL–L–45505 Line–throwing Apparatuses, Rocket and Projectile Units, A | 160.040–1
|
MIL–M–15617 Mats, Fibrous Glass for Reinforcing Plastics, A, and Amdt. 1 | 160.035–1
|
MIL–P–79 Plastic Rods and Tubes, Thermosetting, Laminated, C, and Amdt. 2 | 160.001–1; 161.010–1
|
MIL–P–17549 Plastic Laminates, Fibrous Glass Reinforced, Marine Structural, C, and Amdt. 2 | 160.035–1
|
MIL–P–18066 Plywood, Ship and Boat Construction, B | 160.035–1
|
MIL–P–19644 Plastic Foam, Molded Polystyrene (Expanded Bead Type), C | 160.010–1; 160.035–1
|
MIL–P–21929 Plastic Materials, Cellular Polyurethane, Foam–in–Place, Rigid (2 and 4 Pounds Per Cubic Foot), B, and Amdt. 1 | 160.010–1; 160.035–1
|
MIL–P–40619 Plastic Material, Cellular, Polystyrene (for Buoyancy Applications), A | 160.010–1; 160.035.1; 164.013–1
|
MIL–R–900 Rubber Gasket Material, 45 Durometer Hardness, F | 161.001–1
|
MIL–R–2765 Rubber Sheet, Strip, Extruded, and Molded Shapes, Synthetic, Oil Resistant, C | 161.001–1
|
MIL–R–7575 Resin, Polyester, Low–Pressure Laminating, C, and Amdt. 2 | 160.035–1
|
MIL–R–16847 Ring Buoys, Lifesaving, Unicellular Plastic, E, and Amdt. 2 | 160.050–1
|
MIL–R–21607 Resins, Polyester, Low–Pressure Laminating, Fire–retardant, D | 160.010–1; 160.035–1; 164.018–5
|
MIL–R–23139 Rocket Motors, Surfaced Launched, Development and Qualification Requirements for, B | 160.040–1
|
MIL–S–18655 Signal, Smoke and Illumination, Marine, C | 160.023–1
|
MIL–T–43548C, Thread, Polyester Core: Cotton–, Rayon–, or Polyester–Covered, September 30, 1986 | 164.023–5
|
MIL–T–43624A, Thread, Polyester, Spun, January 22, 1982 | 164.023–5
|
MIL–W–530 Webbing, Textile, Cotton, General Purpose, Natural or in Colors, F, and Amdt. 2 | 160.002–1; 160.005–1; 160.047–1; 160.052–1; 160.055–1
|
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
|
UL 38 Standard for Manually Actuated Signaling Boxes For Use With Fire–Protective Signaling Systems, 1994 | 161.002–1; 161.002–4(b)
|
UL 62–80 Flexible Cord and Fixture Wire | 161.006–1
|
UL 198B–81 Class H Fuses | 161.004–1
|
UL 268 Standard for Smoke Detectors for Fire Protective Signaling Systems, 1989 (revisions through June, 1994) | 161.002–1; 161.002–4(b)
|
UL 521 Standard for Heat Detectors for Fire Protective Signaling Systems, 1993 (revisions through October, 1994) | 161.002–1; 161.002–4(b)
|
UL 864 Standard for Control Units for Fire Protective Signaling Systems, 1991 (revisions through May, 1994) | 161.002–1; 161.002–4(b)
|
UL 1123, Marine Buoyant Devices, February 17, 1995 | 159.001–4; 159.001–3; 160.076–35
|
UL 1180, Fully Inflatable Recreational Personal Flotation Devices, May 15, 1995 | 160.076–7; 160.076–21; 160.076–23; 160.076–25; 160.076–27; 160.076–29; 160.076–31; 160.076–37; 160.076–39
|
UL 1191, Components for Personal Flotation Devices, Third Edition, May 16, 1995 | 160.076–21; 160.076–25; 160.076–39; 164.013–2; 164.013–3; 164.013–5
|
UL 1196 Standard for Floating Waterlights, Second Edition, March 23, 1987 | 161.010–1; 161.010–2; 161.010–4 |