40 CFR (PART 63.1 TO 63.599):
ENVIRONMENTAL PROTECTION AGENCY
| 40 CFR
|
American Conference of Governmental Hygienists
Kemper Woods Center, 1330 Kemper Meadow Drive, Cincinnati, OH 45240
|
American Petroleum Institute
1220 L Street, NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
|
| API Publication 2517, Evaporative Loss from External Floating-Roof Tanks, 3rd Ed., February 1989
| 63.14; 63.111
|
| API Publication 2518, Evaporative Loss from Fixed-Roof Tanks, 2nd Ed., October 1991
| 63.14; 63.150
|
American Public Health Association
1015 Fifteenth Street NW., Washington, DC 20005; Telephone: (202) 777–APHA
|
| Standard Methods for the Examination of Water and Wastewater, American Public Health Association, American Waterworks Association, and Water Pollution Control Federation, 18th Edition, 1992—Method 3500–Cr D, Colorimetric Method
| 63.404
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
|
| ASTM D 388-99, Standard Classification of Coals by Rank
| 63.14
|
| ASTM D 396-02a, Standard Specification for Fuel Oils
| 63.14
|
| ASTM D 1193–77, 91 Standard Specification for Reagent Water
| 63.14
|
| ASTM D 1475–98, Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
| 63.14
|
| ASTM D 1835-03a, Standard Specification for Liquefied Petroleum (LP) Gases
| 63.14
|
| ASTM D 1946–77, Standard Method for Analysis of Reformed Gas by Gas Chromatography
| 63.11(b)(6); 63.14
|
| ASTM D 2013-01, Standard Practice for Preparing Coal Samples for Analysis
| 63.14
|
| ASTM D 2013-04, Standard Practice for Preparing Coal Samples for Analysis
| 63.14
|
| ASTM D 2099-00, Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
| 63.14
|
| ASTM D 2234-00, Standard Practice for Collection of a Gross Sample of Coal
| 63.14
|
| ASTM D 2234-D2234M-03, Standard Practice for Collection of a Gross Sample of Coal
| 63.14
|
| ASTM D 2382–76, Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
| 63.11(b)(6); 63.14
|
| ASTM D 2697–86 (Reapproved 1998), Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
| 63.14
|
| ASTM D 2879–83, Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
| 63.14; 63.111
|
| ASTM D 2879–96, Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
| 63.14
|
| ASTM D 3173-02, Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
| 63.14
|
| ASTM D 3173-03, Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
| 63.14
|
| ASTM D 3683-94 (Reapproved 2000), Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
| 63.14
|
| ASTM D 3684-01, Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
| 63.14
|
| ASTM D 3695–88, Standard Test Method for Volatile Alcohols in Water by Direct Aqueou-Injection Gas Chromatography
| 63.14; 63.365(e)(1)
|
| ASTM D 4017–81, 90, 96a, Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Method
| 63.14(13)
|
| ASTM D 4606-03, Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
| 63.14
|
| ASTM D 5066-91 (Reapproved 2001), Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis
| 63.14
|
| ASTM D 5087-02, Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solvent-borne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
| 63.14
|
| ASTM D 5198-92 (Reapproved 2003), Standard Practice for Nitric Acid Digestion of Solid Waste
| 63.14
|
| ASTM D 5291-02, Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
| 63.14
|
| ASTM D 5865-03a, Standard Test Method for Gross Calorific Value of Coal and Coke
| 63.14
|
| ASTM D 5865-04, Standard Test Method for Gross Calorific Value of Coal and Coke
| 63.14
|
| ASTM D 5965-02, Standard Test Methods for Specific Gravity of Coating Powders
| 63.14
|
| ASTM D 6053-00, Standard Test Method for Determination of Volatile Organic Compounds (VOC) Content of Electrical Insulating Varnishes
| 63.14
|
| ASTM D 6093–97 (Reapproved 2003), Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
| 63.14
|
| ASTM D 6266-00a, Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released from Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
| 63.14
|
| ASTM D 6323-98 (Reapproved 2003), Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
| 63.14
|
| ASTM D 6348-03, Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
| 63.14
|
| ASTM D 6357-04, Standard Test Method for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic Absorption Spectrometry
| 63.14
|
| ASTM D 6420-99 (Reapproved 2004), Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
| 63.14
|
| ASTM D 6522-00, Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
| 63.14
|
| ASTM D 6721-01, Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
| 63.14
|
| ASTM D 6722-01, Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by the Direct Combustion Analysis
| 63.14
|
| ASTM D 6784-02, Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario-Hydro Method)
| 63.14
|
| ASTM E 145–94 Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
| 63.14
|
| ASTM E 180–93 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals
| 63.14(b)
|
| ASTM E 515–95 (Reapproved 2000) Standard Test Method for Leaks Using Bubble Emission Techniques
| 63.14(b); 63.425
|
| ASTM E 711-87 (Reapproved 1996), Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
| 63.14
|
| ASTM E 776-87 (Reapproved 1996), Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
| 63.14
|
| ASTM E 871-82 (Reapproved 1998), Standard Method for Moisture Analysis of Particulate Wood Fuels
| 63.14
|
| ASTM E 885-88 (Reapproved 1996), Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy
| 63.14
|
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Order inquiries: ASME International, Orders/Inquiries, P.O. Box 2900, Fairfield, New Jersey 07007; Telephone: 1-800-843-2763
|
| ASME QHO-1-1994 and QHO-1a-1996 Addenda, Standard for the Qualification and Certification of Hazardous Waste Incinerator Operators
| 63.14
|
| ANSI/ASME PTC 19.10–1981, Flue and Exhaust Gas Analyses: Part 10, Instruments and Apparatus
| 63.14; 63.309
|
Association of Florida Phosphate Chemists
P.O. Box 1645, Bartow, FL 33830
|
| Methods of Analysis for Phosphate Rock, Section IX, No. 1, Preparation of Sample (7th edition, 1991)
| 63.14(h)
|
| Methods of Analysis for Phosphate Rock, Section IX, No. 3, Method A (7th edition, 1991)
| 63.14(h)
|
| Methods of Analysis for Phosphate Rock, Section IX, No. 3, Method B (7th edition, 1991)
| 63.14(h)
|
| Methods of Analysis for Phosphate Rock, Section IX, No. 3, Method C (7th edition, 1991)
| 63.14(h)
|
| Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, Section XI, No. 3, Method A (7th edition, 1991)
| 63.14(h)
|
| Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, Section XI, No. 3, Method B (7th edition, 1991)
| 63.14(h)
|
| Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, Section XI, No. 3, Method C (7th edition, 1991)
| 63.14(h)
|
Association of Official Analytical Chemists (AOAC International)
Customer Services, 2200 Wilson Blvd., Suite 400, Arlington, VA 22201–3301; Telephone: (703) 522–3032, FAX: (703) 522–5468
|
| AOAC Official Method 929.01, Sampling of Solid Fertilizers (16th edition, 1995)
| 63.14(g)
|
| AOAC Official Method 929.02, Preparation of Fertilizer Sample (16th edition, 1995)
| 63.14(g)
|
| AOAC Official Method 957.02, Phosphorus (Total) in Fertilizers, Preparation of Sample Method (16th edition, 1995)
| 63.14(g)
|
| AOAC Official Method 958.01, Phosphorus (Total) in Fertilizers, Spectrophotometric Molybdophosphate Method (16th edition, 1995)
| 63.14(g)
|
| AOAC Official Method 962.02, Phosphorus (Total) in Fertilizers, Gravimetric Quinolinium Molybdophosphate Method (16th edition, 1995)
| 63.14(g)
|
| AOAC Official Method 969.02, Phosphorus (Total) in Fertilizers, Alkalimetric Quinolinium Molybdophosphate Method (16th edition, 1995)
| 63.14(g)
|
| AOAC Official Method 978.01, Phosphorus (Total) in Fertilizers, Automated Method (16th edition, 1995)
| 63.14(g)
|
British Standards Institute
389 Chiswick High Road, London W4 4AL, United Kingdom
|
| British Standard (BS) EN-1593:1999, ”Non-destructive Testing—Leak Testing—Bubble Emission Techniques”
| 63.14; 63.425
|
Environmental Protection Agency, Air and Radiation Docket and Information Center
EPA West Building, 1301 Constitution Avenue NW, Washington, DC
|
| New Hampshire Regulations Applicable to Hazardous Air Pollutants, September 2006
| 63.14; 63.99
|
Environmental Protection Agency, Office of Solid Waste (530SW)
1200 Pennsylvania Avenue NW, Washington DC 20460
|
| Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, EPA Publication SW–846, Third Edition (November 1986), as amended by Updates I (July 1992), II (September 1994), IIA (August 1993), IIB (January 1995), and III (December 1996)—Method 0023A, “Sampling Method for Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofuran Emissions from Stationary Sources”
| 63.14
|
| Test Methods for Evaluating Solid Waste, Physical Chemical Methods, EPA Publication SW–846, Third Edition, November 1986, and Revision I, December 1987—Method 7196, Chromium Hexavalent (Colorimetric)
| 63.404
|
| Method 9071B, “n-Hexane Extractable Material (HEW) for Sludge, Sediment, and Solid Samples,” (Revision 2, April 1998) as published in EPA Publication SW-846: “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods”
| 63.14
|
| Method 9095A, “Paint Filter Liquids Test,” (Revision 1, December 1996) as published in EPA Publication SW-846: “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods”
| 63.14
|
National Council of the Paper Industry for Air and Stream Improvement, Inc. (NCASI)
P.O. Box 13318, Research Triangle Park, NC 27709–3318
|
| NCASI Method DI/MEOH–94.02, Methanol in Process Liquids by GC/FID (Gas Chromatography/Flame Ionization Detection), August 1998
| 63.14; 63.457(c)(3)(ii)
|
| NCASI Method ISS/FP-A105.01, Impinger Source Sampling Method for Selected Aldehydes, Ketones, and Polar Compounds, December 2005
| 63.14
|
State Regulatory Requirements (PART 63)
|
| California; EPA Approved Regulatory Requirements Applicable to the Air Toxics Program, August 1, 1997
| 63.99(a)
|
| California; EPA Approved Regulatory Requirements Applicable to the Air Toxics Program, April 6, 1998
| 63.99(a)
|
| California; EPA Approved Regulatory Requirements Applicable to the Air Toxics Program, January 5, 1999
| 63.99(a)
|
| Delaware; Letter of June 7, 1999, to the U.S. Environmental Protection Agency Region 3 from the Delaware Department of Natural Resources and Environmental Control requesting formal full delegation
to take over primary responsibility for implementation and enforcement of the Chemical Accident Prevention Program under Section 112(r) of the Clean Air Act Amendments of 1990
| 63.14(d)(3)(i); 63.99(a)(8)(i)
|
| State of Delaware Regulations Governing the Control of Air Pollution, October 2000
| 63.14(d)(3)(iii); 63.99(a)(8)(ii)
|
| Delaware Department of Natural Resources and Environmental Control, Division of Air and Waste Management, Accidental Release Prevention Regulation, sections 1 through 5 and sections 7 through 14, effective January 11, 1999.
| 63.14(d)(3)(ii); 63.99(a)(8)(i)
|
| Maine Regulations Applicable to Hazardous Air Pollutants, March 2006
| 63.14; 63.99
|
| Massachusetts Regulations Applicable to Hazardous Air Pollutants, July 2002
| 63.14; 63.99
|
| New Hampshire Regulations Applicable to Hazardous Air Pollutants, March 2003
| 63.14; 63.99
|
| New Jersey's Toxic Catastrophe Prevention Act Program, July 20, 1998
| 63.14; 63.99 |
