Electronic Code of Federal Regulations

We invite you to try out our new beta eCFR site at https://ecfr.federalregister.gov. We have made big changes to make the eCFR easier to use. Be sure to leave feedback using the Feedback button on the bottom right of each page!

Title 40—Protection of Environment
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html

40 CFR (PARTS 700 TO 789): TOXIC SUBSTANCES CONTROL ACT ENVIRONMENTAL PROTECTION AGENCY	40 CFR
American Society for Testing and Materials 100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
ASTM D 93–90 Standard Test Method for Flash Point by Pensky-Martens Closed Tester	761.19(b); 761.60(a)(3) (iii)(B)(6); 761.75(b)(8)(iii)
ASTM D 129–64 (R 78) Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)	761.19(b); 761.60(a)(3) (iii)(B)(6)
ASTM D 240—87 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter	761.19(b); 761.60(a)(3) (iii)(B)(6)
ASTM D 482–87 Standard Test Method for Ash from Petroleum Products	761.19(b); 761.60(a)(3) (iii)(B)(6)
ASTM D 524–88 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products	761.19(b); 761.60(a)(3) (iii)(B)(6)
ASTM D 808–87 Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)	761.60(a)(3)(iii) (B)(6)
ASTM D 923–86 Standard Test Method for Sampling Electrical Insulating Liquids	761.19(b); 761.60(g)(1)(ii) and (2)(ii)
ASTM D 923–89 Standard Methods of Sampling Electrical Insulating Liquids	761.19(b); 761.60(g)(1)(ii) and (2)(ii)
ASTM D 1266–87 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)	761.19(b); 761.60(a)(3) (iii)(B)(6)
ASTM D 1796–83 (Reapproved 1990) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)	761.19(b); 761.60(a)(3) (iii)(B)(6)
ASTM D 2158–89 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases	761.19(b); 761.60(a)(3) (iii)(B)(6)
ASTM D 2709–88 Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge	761.19(b); 761.60(a)(3) (iii)(B)(6)
ASTM D 2784–89 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)	761.19(b); 761.60(a)(3) (iii)(B)(6)
ASTM D 3178–84 Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coke and Coal	761.19(b); 761.60(a)(3) (iii)(B)(6)
ASTM D 3278–89 Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus	761.75(b)(8)(iii)
ASTM E 258–67 (R 87) Standard Test Method for Total Nitrogen Inorganic Material by Modified KJELDAHL Method	761.19(b); 761.60(a)(3) (iii)(B)(6)
National Institute for Occupational Safety and Health (NIOSH) 4676 Columbia Parkway, Cincinnati, Ohio 45226
NIOSH Manual of Analytical Methods, 3rd Edition, Second Supplement, 1987 Method 7400, “Fibers”	763.90(i)(5), (i)(6), and (i)(7)

Need assistance?