40 CFR (PARTS 87 TO 99)
ENVIRONMENTAL PROTECTION AGENCY
| 40 CFR
|
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036
|
ANSI B109.1–1992, Diaphragm Type Gas Displacement Meters
| 92.117
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
|
ASTM D 86–93 Standard Test Method for Distillation of Petroleum Products
| 90.7; Part 90, Appendix A to Subpart D, Table 3; 91.6; Part 91, Appendix A to Subpart D
|
ASTM D 86–95, Standard Test Method for Distillation of Petroleum Products
| 92.113
|
ASTM D 86–97, Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
| 89.6; Part 86, Appendix A to Subpart D
|
ASTM D 86–01, Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
| 94.5; 94.108
|
ASTM D 93–94, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
| 92.113
|
ASTM D 93–97, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
| 89.6; Part 89, Appendix A to Subpart D
|
ASTM D 93–02, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
| 94.5; 94.108
|
ASTM D 129–95, Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
| 89.6; Part 89, Appendix A to Subpart D
|
ASTM D 129–00, Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
| 94.5; 94.108
|
ASTM D 287–92, Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
| 89.6; Part 89, Appendix A to Subpart D; 92.113
|
ASTM D 287–92 (Reapproved 2000), Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
| 94.5; 94.108
|
ASTM D 323–90, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
| 91.6; Part 91, Appendix A to Subpart D
|
ASTM D 445–94, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
| 92.113
|
ASTM D445–97, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
| 89.6; Part 89, Appendix A to Subpart D
|
ASTM D445–01, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
| 94.5; 94.108
|
ASTM D 613–95, Standard Test Method for Cetane Number of Diesel Fuel Oil
| 89.6; Part 89, Appendix A to Subpart D; 92.113
|
ASTM D 613–01, Standard Test Method for Cetane Number of Diesel Fuel Oil
| 94.5; 94.108
|
ASTM D 976–91, Standard Test Method for Calculated Cetane Index of Distillate Fuels
| 92.113
|
ASTM D 1319–89, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
| 90.7, Part 90, Appendix A to Subpart D
|
ASTM D 1319–93, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
| 91.6; Part 91, Appendix A to Subpart D
|
ASTM D 1319–95, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
| 92.113
|
ASTM D 1319–98, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
| 89.6; Part 89, Appendix A to Subpart D
|
ASTM D 1319–02a, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
| 94.5; 94.108
|
ASTM D 1945–91, Standard Test Method for Analysis of Natural Gas by Gas Chromatography
| 92.113
|
ASTM D 2622–92, Standard Test Method for Sulfur in Petroleum Products by X-ray Spectrometry
| 89.6; Appendix A to Subpart D, Table 3; 90.7; Part 90, Appendix A to Subpart D, Table 3; 91.6; Part 91, Appendix A to Subpart D
|
ASTM D 2622–94, Standard Test Method for Sulfur in Petroleum Products by X–ray Spectrometry
| 92.113
|
ASTM D2622–98, Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
| 89.6; Part 89, Appendix A to Subpart D; 94.5; 94.108
|
ASTM D 2699–92, Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method
| 90.7; Part 90, Appendix A to Subpart D, Table 3; 91.6; Part 91, Appendix A to Subpart D
|
ASTM D 2700–92, Standard Test Method for Knock Characteristics of Motor and Aviation Fuels by the Motor Method
| 90.7; Part 90, Appendix A to Subpart D, Table 3; 91.6; Part 91, Appendix A to Subpart D
|
ASTM D 3231–89, Standard Test Method for Phosphorus in Gasoline
| 90.7; Part 90, Appendix A to Subpart D, Table 3; 91.6; Part 91, Appendix A to Subpart D
|
ASTM D 3606–92, Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
| 90.7; Part 90, Appendix A to Subpart D, Table 3; 91.6; Part 91, Appendix A to Subpart D
|
ASTM D 5186–91, Standard Test Method for Determination of Aromatic Content of Diesel Fuels by Supercritical Fluid Chromatography
| 92.113
|
ASTM D 5186–96, Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
| 89.6; Part 89, Appendix A to Subpart D
|
ASTM D 5186–99, Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
| 94.5; 94.108
|
ASTM D 5191–93a, Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
| 90.7; Part 90, Appendix A to Subpart D, Table 3
|
ASTM E29–90, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
| 89.6; 89.207–96; 89.509–96
|
ASTM E 29–93a, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
| 89.6; Part 89, Appendix A to Subpart D; 90.7; 90.116; 90.509; 91.6; Part 91, Appendix A to Subpart D; 91.120; 91.207; 91.509; 91.1307; 92.9, 92.305, 92.509, 94.9; 94.218; 94.305; 94.508
|
ASTM E 29–02, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
| 94.2; 94.5
|
California State Regulations
California Air Resources Board, Haagen-Smit Laboratory, 9528 Telstar Avenue, El Monte, CA 91731–2990
|
California Air Resources Board Resolution 92–2, California Regulations for New 1996 and Later Heavy-Duty Off-Road Diesel Cycle Engines
| 89.6; 89.112–96; 89.119–96; 89.508–96
|
Environmental Protection Agenvy
OAR, 401 M St. SW., Washington, DC 20460
|
California Regulatory Requirements Applicable to the Clean Fuel Fleet and California Pilot Programs, April 1, 1990
| 88.104–94
|
International Civil Aviation Organization
Document Sales Unit, 999 University Street, Montreal, Quebec, Canada H3C 5H7
|
ICAO Annex 16, Volume II, Aircraft Engine Emissions, Second Edition 1993, including Amendment 3 of March 20, 1997
| 87.8; 87.64; 87.71; 87.82; 87.89
|
ICAO Annex 16, Volume II, Aircraft Engine Emissions (Second Ed. 1993), Appendix 2
| 87.82
|
ICAO Annex 16, Volume II, Aircraft Engine Emissions (Second Ed. 1993), Appendixes 3 and 5
| 87.64
|
ICAO Annex 16, Volume II, Aircraft Engine Emissions (Second Ed. 1993), Appendix 6
| 87.71; 87.89
|
International Maritime Organization
4 Albert Embankment, London SE1 7SR, United Kingdom
|
Annex VI of MARPOL 73/78, Revision 2: Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines, 1997
| 94.2; 94.5; 94.11; 94.108; 94.109; 94.204; 94.211; 94.1004
|
International Organization for Standardization
Case Postale 56, CH–1211 Geneva 20, Switzerland
|
ISO 8178-1: Reciprocating Internal Combustion Engines—Exhaust Emission Measurement—Part 1: Test-bed Measurement of Gaseous and Particulate Exhaust Emissions, August 15, 1996
| 94.5; 94.109
|
Society of Automotive Engineers
400 Commonwealth Dr. Warrendale, PA 15096–0001; Telephone: (724) 776–4841
|
SAE J244, June 83, Recommended Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines
| 89.6; 89.416–96; 92.108
|
SAE J1228/ISO 8665, Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations, November 1991
| 91.6; 91.104; 91.115; 91.118; 91.207; 91.1307
|
SAE J1930, September 1991, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
| 90.7; 90.114; 91.113
|
SAE J1930, June 1993, Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
| 91.6; 91.113
|
SAE J1937, November 89, Recommended Practice for Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell
| 89.6; 89.327–96
|
SAE Paper 770141, Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts, Glenn D. Reschke, 1977
| 89.6; 89.319–96; 90.7; 90.316; 91.6; 91.316; 92.119 |