29 CFR (PART 1900 TO 1910.999)
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
(Copies of the documents listed in this table are available through the Technical Data Center, U.S. Department of Labor, Washington, DC, and through Regional Offices of the Occupational Safety and Health Administration. For a complete listing of these addresses, see the end of this table.) | 29 CFR |
Agriculture Ammonia Institute—Rubber Manufacturers Association
1400 K Street, NW., Washington, DC 20005
|
| AAI—RMA Specifications for Anhydrous Ammonia Hose
| 1910.111
|
American Conference of Governmental Industrial Hygienists
P.O. Box 1937, Cincinnati, OH 45201
|
| ACGIH Manual “Industrial Ventilation” (1970)
| 1910.94
|
| ACGIH Industrial Ventilation: A Manual of Recommended Practice, 22d Edition, 1995
| 1910.6; 1910.124(b)(4)(iii)
|
| Threshold Limit Values and Biological Exposure Indices for 1986–87 (1986)
| 1910.120
|
American Society of Agricultural Engineers (ASAE)
2950 Niles Road, P.O. Box 229, St. Joseph, MO 49085
|
| ASAE Emblem for Identifying Slow Moving Vehicles, ASAE S276.2 (1968)
| 1910.145
|
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036; Telephone: (212) 642–4900
|
| ANSI A10.2–44 Safety Code for Building Construction
| 1910.144
|
| ANSI A10.3–70 Safety Requirements for Explosive-Actuated Fastening Tools
| 1910.243
|
| ANSI A11.1–65 (R 70) Practice for Industrial Lighting
| 1910.219; 1910.261; 1910.265
|
| ANSI A11.1–65 Practice for Industrial Lighting
| 1910.262; 1910.265
|
| ANSI A12.1–67 Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards
| 1910.66; 1910.68; 1910.261
|
| ANSI A13.1–56 Scheme for the Identification of Piping Systems
| 1910.253; 1910.261; 1910.262
|
| ANSI A14.1–68 Safety Code for Portable Wood Ladders, Supplemented by ANSI A14.1a–77
| 1910.261
|
| ANSI A14.2–56 Safety Code for Portable Metal Ladders, Supplemented by ANSI A14.2a–77
| 1910.261
|
| ANSI A14.3–56 Safety Code for Fixed Ladders
| 1910.68; 1910.179; 1910.261
|
| ANSI A17.1–65 Safety Code for Elevators, Dumbwaiters and Moving Walks, Including Supplements, A17.1a (1967); A17.1b (1968); A17.1c (1969); A17.1d (1970)
| 1910.261
|
| ANSI A17.2–60 Practice for the Inspection of Elevators, Including Supplements, A17.2a (1965), A17.2b (1967)
| 1910.261
|
| ANSI A90.1–69 Safety Standard for Manlifts
| 1910.68
|
| ANSI A92.2–69 Standard for Vehicle Mounted Elevating and Rotating Work Platforms
| 1910.67; 1910.268
|
| ANSI A120.1–70 Safety Code for Powered Platforms for Exterior Building Maintenance
| 1910.66
|
| ANSI B7.1–70 Safety Code for the Use, Care and Protection of Abrasive Wheels
| 1910.94; 1910.215; 1910.218
|
| ANSI B15.1–53 (R 58) Safety Code for Mechanical Power Transmission Apparatus
| 1910.68; 1910.261
|
| ANSI B20.1–57 Safety Code for Conveyors, Cableways, and Related Equipment
| 1910.218; 1910.261; 1910.265
|
| ANSI B30.2–43 (R 52) Safety Code for Cranes, Derricks, and Hoists
| 1910.261
|
| ANSI B30.2.0–67 Safety Code for Overhead and Gantry Cranes
| 1910.179; 1910.261
|
| ANSI B30.5–68 Safety Code for Crawler, Locomotive, and Truck Cranes
| 1910.180; 1910.261
|
| ANSI B30.6–69 Safety Code for Derricks
| 1910.181; 1910.268
|
| ANSI B31.1–55 Code for Pressure Piping
| 1910.261
|
| ANSI B31.1a–63 Addenda to ANSI B31.1 (1955)
| 1910.261
|
| ANSI B31.1.0–67 and Addenda B31.1.0a (1969) Code for Pressure Piping
| 1910.103; 1910.104; 1910.218; 1910.261
|
| ANSI B31.2–68 Fuel Gas Piping
| 1910.261
|
| ANSI B31.3–66 Petroleum Refinery Piping
| 1910.103
|
| ANSI B31.5–66 Addenda B31.5a (1968) Refrigeration Piping
| 1910.103; 1910.111
|
| ANSI B56.1–69 Safety Standard for Powered Industrial Trucks
| 1910.178; 1910.261
|
| ANSI B57.1–65 Compressed Gas Cylinder Valve Outlet and Inlet Connections
| 1910.253
|
| ANSI B71.1–68 Safety Specifications for Power Lawn Mowers
| 1910.243
|
| ANSI B175.1–1991, Safety Requirements for Gasoline-Powered Chain Saws
| 1910.266
|
| ANSI C1–71 National Electrical Code
| 1910.66
|
| ANSI D8.1–67 Practices for Railroad Highway Grade Crossing Protection
| 1910.265
|
| ANSI H23.1–70 Seamless Copper Water Tube Specification
| 1910.110
|
| ANSI H38.7–69 Specification for Aluminum Alloy Seamless Pipe and Seamless Extruded Tube
| 1910.110
|
| ANSI J6.4–71 Standard Specification for Rubber Insulating Blankets
| 1910.268
|
| ANSI J6.6–71 Standard Specification for Rubber Insulating Gloves
| 1910.268
|
| ANSI K13.1–67 Identification of Gas Mask Canisters
| 1910.261
|
| ANSI K61.1–60 Safety Requirements for the Storage and Handling of Anhydrous Ammonia
| 1910.111
|
| ANSI K61.1–66 Safety Requirements for the Storage and Handling of Anhydrous Ammonia
| 1910.111
|
| ANSI O1.1–54 (R 61) Safety Code for Woodworking Machinery
| 1910.261
|
| ANSI S1.4–71 (R 76) Specification for Sound Level Meters
| 1910.95
|
| ANSI S1.11–71 (R 76) Specification for Octave, Half-Octave and Third-Octave Band Filter Sets
| 1910.95
|
| ANSI S3.6–69 Specifications for Audiometers
| 1910.95
|
| ANSI Z4.1–68 Requirements for Sanitation in Places of Employment
| 1910.261
|
| ANSI Z4.2–42 Standard Specifications for Drinking Fountains
| 1910.142
|
| ANSI Z9.1–51 Safety Code for Ventilation and Operation of Open Surface Tanks
| 1910.94; 1910.261
|
| ANSI Z9.1–71 Practices for Ventilation and Operation of Open-Surface Tanks
| 1910.6; 1910.124(b)(4)(iv)
|
| ANSI Z9.2–60 Fundamentals Governing the Design and Operation of Local Exhaust Systems
| 1910.94; 1910.261
|
| ANSI Z9.2–79 Fundamentals Governing the Design and Operation of Local Exhaust Systems
| 1910.6; 1910.124(b)(4)(i)
|
| ANSI Z12.12–68 Standard for the Prevention of Sulfur Fires and Explosions
| 1910.261
|
| ANSI Z12.20–62 (R 69) Code for the Prevention of Dust Explosions in Woodworking and Wood Flour Manufacturing Plants
| 1910.265
|
| ANSI Z21.30–64 Requirements for Gas Appliances and Gas Piping Installations
| 1910.265
|
| ANSI Z24.22–57 Method of Measurement of Real-Ear Attenuation of Ear Protectors at Threshold
| 1910.261
|
| ANSI Z33.1–61 Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying
| 1910.261; 1910.265
|
| ANSI Z33.1–66 Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying
| 1910.94
|
| ANSI Z35.1–68 Specifications for Accident Prevention Signs
| 1910.261
|
| ANSI Z41.1–67 Men's Safety Toe Footwear
| 1910.94; 1910.136; 1910.261
|
| ANSI Z41–91, Personal Protection-Protective Footwear
| 1910.136
|
| ANSI Z48.1–54 Method for Marking Portable Compressed Gas Containers to Identify the Material Contained
| 1910.103; 1910.110; 1910.253
|
| ANSI Z48.1–54 (R 70) Method for Marking Portable Compressed Gas Containers To Identify the Material Contained
| 1910.111; 1910.134
|
| ANSI Z49.1–67 Safety in Welding and Cutting
| 1910.252
|
| ANSI Z53.1–67 Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment
| 1910.97; 1910.145
|
| ANSI Z54.1–63 Safety Standard for Non-Medical X-Ray and Sealed Gamma Ray Sources
| 1910.252
|
| ANSI Z87.1–68 Practice of Occupational and Educational Eye and Face Protection
| 1910.133; 1910.252; 1910.261
|
| ANSI Z87.1–89, Practice for Occupational and Educational Eye and Face Protection
| 1910.133
|
| ANSI Z88.2–69 Practices for Respiratory Protection
| 1910.94; 1910.134; 1910.261; 1910.266
|
| ANSI Z89.1–69 Safety Requirements for Industrial Head Protection
| 1910.135; 1910.261; 1910.266
|
| ANSI Z89.1–86, Protective Headwear for Industrial Workers Requirements
| 1910.135
|
| ANSI Z89.2–71 Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B
| 1910.268
|
American Petroleum Institute
1220 L Street, NW., Washington, DC 20005–4070; Telephone: (202)682–8000
|
| API 12A (Sept. 1951) Specification for Oil Storage Tanks With Riveted Shells, 7th Ed
| 1910.106
|
| API 12B (May 1958) Specification for Bolted Production Tanks, 11th Ed., With Supplement No. 1, Mar. 1962
| 1910.106
|
| API 12D (Aug. 1957) Specification for Large Welded Production Tanks, 7th Ed
| 1910.106
|
| API 12F (Mar. 1961) Specification for Small Welded Production Tanks, 5th Ed
| 1910.106
|
| API 620, Fourth Ed. (1970) Including Appendix R, Recommended Rules for Design and Construction of Large Welded Low Pressure Storage Tanks
| 1910.103; 1910.106; 1910.111
|
| API 650 (1966) Welded Steel Tanks for Oil Storage, 3rd Ed
| 1910.106
|
| API 1104 (1968) Standard for Welding Pipelines and Related Facilities
| 1910.252
|
| API 2000 (1968) Venting Atmospheric and Low Pressure Storage Tanks
| 1910.106
|
| API 2201 (1963) Welding or Hot Tapping on Equipment Containing Flammables
| 1910.252
|
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Order inquiries: 22 Law Drive, P.O. Box 2900, Fairfield, New Jersey 07007; Phone: 1-800-843-2763
|
| ASME Boiler and Pressure Vessel Code, Sec. VIII, 1949, 1950, 1952, 1956, 1959, and 1962 Ed
| 1910.110; 1910.111
|
| ASME Code for Pressure Vessels, 1968 Ed
| 1910.106; 1910.217
|
| ASME Boiler and Pressure Vessel Code, Sec. VIII, 1968
| 1910.103; 1910.104; 1910.106; 1910.107; 1910.110; 1910.111; 1910.169
|
| ASME Boiler and Pressure Vessel Code, Sec. VIII, Paragraph UG–84, 1968
| 1910.104
|
| ASME Boiler and Pressure Vessel Code, Sec. VIII, Unfired Pressure Vessels, Including Addenda (1969)
| 1910.261; 1910.262; 1910.263
|
| Code for Unfired Pressure Vessels for Petroleum Liquids and Gases of the API and the ASME, 1951 Ed
| 1910.110
|
| ASME B56.6–1992 (with addenda), Safety Standard for Rough Terrain Forklift Trucks
| 1910.266
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
|
| ASTM A 47–68 Malleable Iron Castings
| 1910.111
|
| ASTM A 53–69 Welded and Seamless Steel Pipe
| 1910.110; 1910.111
|
| ASTM A 126–66 Gray Iron Casting for Valves, Flanges and Pipe Fitting
| 1910.111
|
| ASTM A 391–65 (ANSI G61.1–1968) Alloy Steel Chain
| 1910.184
|
| ASTM A 395–68 Ductile Iron for Use at Elevated Temperatures
| 1910.111
|
| ASTM B 88–69 Seamless Copper Water Tube
| 1910.110
|
| ASTM B 88–66A Seamless Copper Water Tube
| 1910.252
|
| ASTM B 117–64 Salt Spray (Fog) Test
| 1910.268
|
| ASTM B 210–68 Aluminum-Alloy Drawn Seamless Tubes
| 1910.110
|
| ASTM B 241–69 Standard Specification for Aluminum—Alloy Seamless Pipe and Seamless Extruded Tube
| 1910.110(b)(8)(i)
|
| ASTM D 5–65 Test for Penetration by Bituminous Materials
| 1910.106
|
| ASTM D 56–70 Test for Flash Point by Tag Closed Tester
| 1910.106
|
| ASTM D 86–62 Test for Distillation of Petroleum Products
| 1910.106
|
| ASTM D 88–56 Test for Saybolt Viscosity
| 1910.106
|
| ASTM D 93–71 Test for Flash Point by Pensky Martens
| 1910.106
|
| ASTM D 323–68 Standard Method of Test for Vapor Pressure of Petroleum Products (Reid Method)
| 1910.106(a)(30)
|
| ASTM D 445–65 Test for Viscosity of Transparent and Opaque Liquids
| 1910.106
|
| ASTM D 1692–68 Test for Flammability of Plastic Sheeting and Cellular Plastics
| 1910.103
|
| ASTM D 2161–66 Conversion Tables For SUS
| 1910.106
|
American Welding Society
550 N.W. LeJeune Road, Miami, FL 33126
|
| AWS A3.0 (1969) Terms and Definitions
| 1910.251
|
| AWS A6.1 (1966) Recommended Safe Practices for Gas Shielded Arc Welding
| 1910.254
|
| AWS B3.0–41 Standard Qualification Procedure
| 1910.67
|
| AWS D1.0–1966 Code for Welding in Building Construction
| 1910.27
|
| AWS D2.0–69 Specifications for Welding Highway and Railway Bridges
| 1910.67
|
| AWS D8.4–61 Recommended Practices for Automotive Welding Design
| 1910.67
|
| AWS D10.9–69 Standard Qualification of Welding Procedures and Welders for Piping and Tubing
| 1910.67
|
Commerce, Department of
National Technical Information Service, 5285 Port Royal Rd., Springfield, VA 22161
|
| Commercial Standard, CS 202–56 (1961) “Industrial Lifts and Hinged Loading Ramps”
| 1910.30
|
| Pub., “Model Performance Criteria for Structural Fire Fighters’ Helmets”
| 1910.156
|
Compressed Gas Association
1235 Jefferson Davis Highway, Arlington, VA 22202
|
| CGA C–6 (1968) Standards for Visual Inspection of Compressed Gas Cylinders
| 1910.101
|
| CGA C–8 (1962) Standard for Requalification of ICC–3HT Cylinders
| 1910.101
|
| CGA G–1 (1966) Acetylene
| 1910.102
|
| CGA G–1.3 (1959) Acetylene Transmission for Chemical Synthesis
| 1910.102
|
| CGA G–1.4 (1966) Standard for Acetylene Cylinder Charging Plants
| 1910.102
|
| CGA G–7.1 (1966) Commodity Specification
| 1910.134
|
| CGA G–8.1 (1964) Standard for the Installation of Nitrous Oxide Systems at Consumer Sites
| 1910.105
|
| CGA P–1 (1965) Safe Handling of Compressed Gases
| 1910.101
|
| CGA P–3 (1963) Specifications, Properties, and Recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate
| 1910.109
|
| CGA S–1.1 (1963) and 1965 Addenda. Safety Release Device Standards—Cylinders for Compressed Gases
| 1910.101; 1910.103
|
| CGA S–1.2 (1963) Safety Release Device Standards, Cargo and Portable Tanks for Compressed Gases
| 1910.101; 1910.103
|
| CGA S–1.3 (1959) Safety Release Device Standards—Compressed Gas Storage Containers
| 1910.103; 1910.104; 1910.111
|
| CGA 1957 Standard Hose Connection Standard
| 1910.253
|
| CGA and RMA (Rubber Manufacturer's Association) Specification for Rubber Welding Hose (1958)
| 1910.253
|
| CGA 1958 Regulator Connection Standard
| 1910.253
|
Crane Manufacturer's Association of America, Inc.
1 Thomas Circle, NW., Washington, DC 20005
|
| CMAA Specification #61, Specifications for Electric Overhead Traveling Cranes
| 1910.179
|
| General Services Administration
|
| GSA Pub. GG–B–0067b, Air Compressed for Breathing Purposes, or Interim Federal Specifications, Apr. 1965
| 1910.134
|
| Health and Human Services, Department of
|
| Publication No. 76–120 (1975), List of Personal Hearing Protectors and Attenuation Data
| 1910.95
|
Institute of Makers of Explosives
420 Lexington Avenue, New York, NY 10017
|
| IME Pamphlet No. 17, 1960, Safety in the Handling and Use of Explosives
| 1910.261
|
National Electrical Manufacturer's Association
1300 North 17th Street, Suite 1847, Rosslyn, VA 22209; Telephone: (703) 841–3200; FAX: (703) 841–3300
|
| NEMA EW–1 (1962) Requirements for Electric Arc Welding Apparatus
| 1910.254
|
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
|
| NFPA 30 (1969) Flammable and Combustible Liquids Code
| 1910.178
|
| NFPA 32–1970 Standard for Dry Cleaning Plants
| 1910.106
|
| NFPA 33–1969 Standard for Spray Finishing Using Flammable and Combustible Material
| 1910.94
|
| NFPA 34–1966 Standard for Dip Tanks Containing Flammable or Combustible Liquids
| 1910.94
|
| NFPA 34–1995 Standard for Dipping and Coating Processes Using Flammable or Combustible Liquids
| 1910.6; 1910.124(b)(4)(ii)
|
| NFPA 34–1996 Standard for Dip Tanks Containing Flammable or Combustible Liquids
| 1910.6(q)(4); 1910.124(b)(4)(iv)
|
| NFPA 35–1970 Standard for the Manufacture of Organic Coatings
| 1910.106
|
| NFPA 36–1967 Standard for Solvent Extraction Plants
| 1910.106
|
| NFPA 37–1970 Standard for the Installation and Use of Stationery Combustion Engines and Gas Turbines
| 1910.106; 1910.110
|
| NFPA 51B–1962 Standard for Fire Protection in Use of Cutting and Welding Processes
| 1910.252
|
| NFPA 54–1969 Standard for the Installation of Gas Appliances and Gas Piping
| 1910.110
|
| NFPA 54A–69 Standard for the Installation of Gas Piping and Gas Equipment on Industrial Premises and Certain Other Premises
| 1910.110
|
| NFPA 58–1969 Standard for the Storage and Handling of Liquefied Petroleum Gases (ANSI Z106.1–1970)
| 1910.110; 1910.178
|
| NFPA 59–1968 Standard for the Storage and Handling of Liquefied Petroleum Gases at Utility Gas Plants
| 1910.110
|
| NFPA 62–1967 Standard for the Prevention of Dust Explosions in the Production, Packaging, and Handling of Pulverized Sugar and Cocoa
| 1910.263
|
| NFPA 68–1954 Guide for Explosion Venting
| 1910.94
|
| NFPA 70–1971 National Electrical Code
| 1910.66
|
| NFPA 78–1968 Lightning Protection Code
| 1910.109
|
| NFPA 80–1968 Standard for Fire Doors and Windows
| 1910.106
|
| NFPA 80–1970 Standard for the Installation of Fire Doors and Windows
| 1910.253
|
| NFPA 86A–1969 Standard for Oven and Furnaces Design, Location and Equipment
| 1910.107; 1910.108
|
| NFPA 91–1961 Standard for the Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying (ANSI Z33.1–61)
| 1910.107
|
| NFPA 91–1969 Standards for Blower and Exhaust Systems
| 1910.108
|
| NFPA 96–1970 Standard for the Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment
| 1910.110
|
| NFPA 101–1070 Code for Life Safety From Fire in Buildings and Structures
| 1910.261
|
| NFPA 203M–1970 Manual on Roof Coverings
| 1910.109
|
| NFPA 251–1969 Standard Methods of Fire Tests of Building Construction and Materials
| 1910.106
|
| NFPA 302–1968 Fire Protection Standard for Motor–Craft (Pleasure and Commercial)
| 1910.265
|
| NFPA 385–1966 Recommended Regulatory Standard for Tank Vehicles for Flammable and Combustible Liquids
| 1910.106
|
| NFPA 496–1967 Standard for Purged Enclosures for Electrical Equipment in Hazardous Locations
| 1910.103
|
| NFPA 505–1969 Standard for Type Designations, Areas of Use, Maintenence, and Operation of Powered Industrial Trucks
| 1910.110
|
| NFPA 566–1965 Standard for the Installation of Bulk Oxygen Systems at Consumer Sites
| 1910.253
|
| NFPA 656–1959 Code for the Prevention of Dust Ignition in Spice Grinding Plants
| 1910.263
|
| NFPA 1971–1975 Protective Clothing for Structural Fire Fighting
| 1910.156
|
National Food Plant Institute
1700 K Street, NW., Washington, DC 20006
|
| Definition and Test Procedures for Ammonium Nitrate Fertilizer (Nov. 1964)
| 1910.109
|
National Institute for Occupational Safety and Health
NIOSH Publications, 4676 Columbia Parkway, Mail Stop C–13, Cincinnati, OH 45226–1998; Telephone: (800) 356–4674
|
| Registry of Toxic Effects of Chemical Substances, 1978
| 1910.20
|
| Development of Criteria for Fire Fighters Gloves; Vol. II, Part II; Test Methods, 1976
| 1910.156
|
| NIOSH Recommendations for Occupational Safety and Health Standards (September 1987)
| 1910.120
|
Society of Automotive Engineers
400 Commonwealth Dr., Warrendale, PA 15096–0001; Telephone: (412) 776–4841
|
| SAE J185, June 1988, Recommended Practice for Access Systems for Off-Road Machines
| 1910.266
|
| SAE J231, January 1981, Minimum Performance Criteria for Falling Object Protective Structure (FOPS)
| 1910.266
|
| SAE J386, June 1985, Operator Restraint Systems for Off-Road Work Machines
| 1910.266
|
| SAE J397, April 1988, Deflection Limiting Volume—ROPS/FOPS Laboratory Evaluation
| 1920.266
|
| SAE 765 (1961) SAE Recommended Practice: Crane Loading Stability Test Code
| 1910.180
|
| SAE J1040, April 1988, Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines
| 1920.266
|
The Fertilizer Institute
1015 18th. Street, NW., Washington, DC 20036
|
| Standard M–1 (1953, 1955, 1957, 1960, 1961, 1963, 1965, 1966, 1967, 1968), Superseded by ANSI K61.1–1972
| 1910.111
|
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112; Telephone: (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105; Telephone: (800) 854–7179
|
| UL 58–61 Steel Underground Tanks for Flammable and Combustible Liquids, 5th Ed
| 1910.106
|
| UL 80–63 Steel Inside Tanks for Oil-Burner Fuel
| 1910.106
|
| UL 142–68 Steel Above Ground Tanks for Flammable and Combustible Liquids
| 1910.106
|
United States Public Health Service
Available from: United States Pharmacopeia Convention, 2601 Twinbrook Parkway, Rockville, MD 20852
|
| U.S. Pharmacopeia
| 1910.134
|
| Publication No. 934 (1962), Food Service Sanitation Ordinance and Code, Part V of the Food Service Sanitation Manual
| 1910.142
|
Addresses
Technical Data Center: Frances Perkins Department of Labor Building, Room N2625, 200 Constitution Ave., NW., Washington, DC 20210.
Boston Regional Office—Region I: Regional Administrator, U.S. Department of Labor—OSHA, JFK Federal Bldg., Rm. E–340, Boston, MA 02203.
New York Regional Office—Region II: Regional Administrator, U.S. Department of Labor—OSHA, 201 Varick St., Room 670, New York, NY 10014.
Philadelphia Regional Office—Region III: Regional Administrator, U.S. Department of Labor—OSHA, Gateway Bldg., Suite 2100, 3535 Market St., Philadelphia, PA 19104.
Atlanta Regional Office—Region IV: Regional Administrator, U.S. Department of Labor—OSHA, 1375 Peachtree St., NE., Suite 587, Atlanta, GA 30367.
Chicago Regional Office—Region V: Regional Administrator, U.S. Department of Labor—OSHA, 32nd Fl., Room 3244, 230 S. Dearborn St., Chicago, IL 60604.
Dallas Regional Office—Region VI: Regional Administrator, U.S. Department of Labor—OSHA, 555 Griffin St., Room 602, Dallas, TX 75202.
Kansas City Regional Office—Region VII: Regional Administrator, U.S. Department of Labor—OSHA, 1100 Main St., Kansas City, MO 64106.
Denver Regional Office—Region VIII: Regional Administrator, U.S. Department of Labor—OSHA, 1999 Broadway, Suite 1690, Denver, CO 80202–5716.
San Francisco Regional Office—Region IX: Regional Administrator, U.S. Department of Labor—OSHA, 71 Stevenson St., Suite 420, San Francisco, CA 94105.
Seattle Regional Office—Region X: Regional Administrator, U.S. Department of Labor—OSHA, 1111 Third Avenue, Suite 715, Seattle, WA 98101–3212.
|
| Note: Addresses of standards organizations are also listed at 29 CFR 1910.6. |
