24 CFR (PART 1700 TO END)
DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT, OFFICE OF ASSISTANT SECRETARY FOR HOUSING—FEDERAL HOUSING COMMISSIONER
| 24 CFR
|
Aluminum Association
1525 Wilson Boulevard, Suite 600. Arlington, VA 22209
|
| Aluminum Design Manual, Part 1-A: “Specifications for Aluminum Structures: Allowable Stress Design,” Sixth edition, October 1994 and Part 1-B: “Specifications for Aluminum Structures: Load and Resistance Factor Design of Buildings and Similar Type Structures”, First edition, October 1994
| 3280.304
|
American Architectural Manufacturers Association
1827 Walden Office Square, Suite 550, Schaumburg, Illinois 60173-4268
|
| AAMA 1503.1–88, Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections
| 3280.508(e)
|
| AAMA 101. I.S. 2-97, Voluntary Specification for Aluminum, Vinyl (PVC), and Wood Windows and Glass Doors
| 3280.403(b)(1); 3280.403(b) and (e); 3280.404(b)
|
| AAMA 1600/I.S. 7-00, Voluntary Specification for Skylights, 2003
| 3280.305
|
| AAMA 1701.2–1995, Primary Window and Sliding Glass Door Voluntary Standard for Utilization in Manufactured Housing
| 3280.403(b); 3280.403(e); 3280.405(e)(2); 3280.404(b)
|
| AAMA 1702.2–1995, Swinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing
| 3280.405(b); 3280.405(e); 3280.405(e)(2)
|
| AAMA 1704–1985, Voluntary Standard Egress Window Systems for Utilization in Manufactured-Housing
| 3280.404(b); 3280.404(e)
|
American Forest and Paper Association (formerly National Forest Products Association)
1250 Connecticut Avenue, NW., Washington, DC 20036
|
| ANSI/AF&PA NDS-2001: “National Design Specification for Wood Construction,” with Supplement: “Design Values for Wood Construction,” November 30, 2001
| 3280.304(b)
|
| Span Tables for Joists and Rafters, PS–20–70, 1993
| 3280.304(b)(1)
|
| Wood Structural Design Data, 1986 Edition With 1992 Revisions
| 3280.304(b)(1)
|
| Design Values for Joists and Rafters, American Softwood Lumber Standard Sizes, 1992
| 3280.304(b)(1)
|
American Gas Association
8501 East Pleasant Valley Road, Cleveland, OH 44131
|
| AGA Requirements for Gas Connectors for Connection of Fixed Appliances for Outdoor Installation, Park Trailers and Manufactured (Mobile) Homes to the Gas Supply. No. 3–87
| 3280.703
|
American Hardboard Association
1210 West Northwest Highway, Palatine, Illinois 60067
|
| ANSI/AHA A135.4–1995, Basic Hardboard
| 3280.304(b)(1)
|
| ANSI/AHA A135.5–1995, Prefinished Hardboard Paneling
| 3280.304(b)(1)
|
| ANSI/AHA A135.6–1998, Hardboard Siding
| 3280.304(b)(1)
|
American Institute of Steel Construction
One East Wacker Drive, Chicago, IL 60601
|
| AISC–S335: Specification for Structural Steel Buildings—Allowable Stress Design and Plastic Design, June 1, 1989
| 3280.304(b)(1); 3280.305(i)(1)
|
American Iron and Steel Institute
1101 17th Street, NW., Washington, DC 20036
|
| AISI Specification for the Design of Cold-Formed Steel Structural Members, 1996
| 3280.304(b)(1); 3280.305(j)(1)
|
| AISI Stainless Steel Cold-Formed Structural Design Manual, 1974
| 3280.304(b)(1); 3280.305(i)(1)
|
| AISI Manual for Structural Applications of Steel Cables for Buildings, 1973
| 3280.304(b)(1)
|
American National Standards Institute
11 West 42nd Street, New York, NY 10036 Telephone: (212) 642–4900
|
| ANSI A112.14.1–1975, Backflow Valves
| 3280.604(a)
|
| ANSI/ASME A112.18.1M–1989, Plumbing Fixture Fittings
| 3280.604(a)
|
| ANSI/ASME A112.19.1M–1987, Enameled Cast Iron Plumbing Fixtures
| 3280.604(a)
|
| ANSI/ASME A112.19.2(M)–1990, Vitreous China Plumbing Fixtures
| 3280.604(a)
|
| ANSI/ASME A112.19.3M–1987, Stainless Steel Plumbing Fixtures (Designed for Residential Use)
| 3280.604(a)
|
| ANSI/ASME A112.19.4(M)–1984, Porcelain Enameled Formed Steel Plumbing Fixtures
| 3280.604(a)
|
| ANSI A112.19.5–1979, Trim for Water Closet, Bowls, Tanks, and Urinals
| 3280.604(a)
|
| ANSI/ASME A112.21.3M–1985, Hydrants for Utility and Maintenance Use
| 3280.604(a)
|
| ANSI A112.26.1–1969 (R 1975), Water Hammer Arresters
| 3280.604(a)
|
| ANSI/AIRC A190.1–1992, For Wood Products-Structural Glued Laminated Timber
| 3280.304(b)(1)
|
| ANSI A208.1–1999, Particleboard
| 3280.304(b)(1)
|
| ANSI/ASME A112.4.1–1993, Water Heater Relief Valve Drain Tubes
| 3280.604(b)
|
| ANSI/ASME A112.4.3–1999, Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System
| 3280.604(b)
|
| ANSI/ASME B1.20.1–1983, Pipe Threads, General Purpose (Inch)
| 3280.604(a); 3280.703; 3280.705(e); 3280.706(d)
|
| ASME B16.3–1992, Malleable Iron Threaded Fittings
| 3280.604(a)
|
| ANSI/ASME B16.4–1992, Gray Iron Threaded Fittings
| 3280.604(a)
|
| ANSI/ASME B16.15–1985, Cast Bronze Threaded Fittings, Classes 125 and 250
| 3280.604(a)
|
| ANSI B16.18–1984, Cast Copper Alloy Solder-Joint Pressure Fittings
| 3280.604(b)
|
| ASME/ANSI B16.22–1989, Wrought-Copper and Copper Alloy, Solder-Joint Pressure Fitting
| 3280.604(a)
|
| ASME B16.23–1992, Cast Copper Alloy Solder-Joint Drainage Fittings—DWV
| 3280.604(a)
|
| ASME/ANSI B16.26–1988, Cast Copper Alloy Fittings for Flared Copper Tubes
| 3280.604(a)
|
| ASME/ANSI B16.29–1986, Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings—DWV
| 3280.604(a)
|
| ANSI/ASME B36.10–1979, Welding and Seamless Wrought Steel Pipe
| 3280.604(a); 3280.703; 3280.705(b)(1); 3280.706(b)(1)
|
| ANSI Z21.1–2000, Household Cooking Gas Appliances
| 3280.703
|
| ANSI Z21.5.1–1999, CSA 7.1-M99, Gas Clothes Dryers, Volome 1—Type 1, Clothes Dryers, with Addendum Z21.5.1a-1999
| 3280.703
|
| ANSI Z21.10.1–1998, CSA 4.1-M98, Gas Water Heaters, Volome 1—Storage Water Heaters with Input Ratings of 75,000 BTU per Hour or Less with Addendum Z21.10.1a-2000
| 3280.703
|
| ANSI Z21.15–1997, CSA 9.1-M97, Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves
| 3280.703
|
| ANSI Z21.19–1990, With Addenda Z21.19a–1992, Refrigerators Using Gas Fuel
| 3280.703
|
| ANSI Z21.20–2000, With Addendum Z21.20a–2000, Automatic Gas Ignition Systems and Components
| 3280.703
|
| ANSI Z21.21–2000, CSA 6.5-2000, Automatic Valves for Gas Appliances
| 3280.703
|
| ANSI Z21.22–1999, CSA 4.4-M99, Relief Valves for Hot Water Supply Systems
| 3280.604(a); 3280.703
|
| ANSI Z21.23–1989, With Addendum Z21.23a–1991, Gas Appliance Thermostats
| 3280.703
|
| ANSI Z21.24–1997, CGA 6.10-M97, American National Standard/Canadian Gas Association Standard for Connectors for Gas Appliances
| 3280.702(a)(17); 3280.703
|
| ANSI Z21.40.1–1996, CGA 2.91-M96, Gas-Fired, Heat Activated Air Conditioning and Heat Pump Appliances
| 3280.703; 3280.714(a)(2)
|
| ANSI Z21.47–1990, With Addendum Z21.47a–1990 and Z21.47b–1992, Gas-Fired Central Furnaces [Except Direct Vent System Central Furnaces]
| 3280.703
|
| ANSI Z21.64–1990, With Addenda Z21.64a–1992, Direct Vent Central Furnaces
| 3280.703
|
| ANSI Z34.1–1993, American National Standard for Third-Party Certification Programs for Products, Processes, and Services
| 3280.403(e)(1); 3280.405(e)(1)
|
| ANSI Z97.1–1984, Safety Performance Specifications and Methods of Test for Safety Glazing Materials Used in Building
| 3280.114(b); 3280.304(b)(1); 3280.403(d)(1); 3280.604(a); 3280.607(b)(3)(iii)
|
| ANSI Z124.1–1987, Plastic Bathtubs Units with Addenda Z124.1a–1990 and Z123.16–1991
| 3289.604(a)
|
| ANSI Z124.2–1987, Plastic Shower Receptors and Shower Stalls with addendum Z124.21–1990
| 3280.604(a)
|
| ANSI Z124.3–1986, Plastic Lavatories with addendum 124.3a–1990
| 3280.604(a)
|
| ANSI Z124.4–1986, Plastic Water Closets, Bowls and Tanks with Addenda Z124.4a–1990
| 3280.604(a)
|
| ANSI Z124.5–1997, American National Standard for Plastic Toilet (Water closets) Seats
| 3280.604(b)
|
| ANSI Z124.7–1997, American National Standard for Prefabricated Plastic Spa Shells
| 3280.604(b)
|
| ANSI Z124.8–1990, Bathtub Liners
| 3280.604(b)
|
| ANSI Z124.9–1994, Plastic Urinal Fixtures
| 3280.604(b)
|
American Plywood Association
7011 South 19th Street, Tacoma, WA 98411
|
| APA D410A–2004, Panel Design Specification
| 3280.304(b)(1)
|
| APA E 30P–1996, APA Design/Construction Guide, Residential and Commercial Structures
| 3280.304(b)(1)
|
| APA–Y 510Q–1993, Plywood Design Specification
| 3280.304(b)(1)
|
| APA–S 811M–1990, Design and Fabrication of Plywood Curved Panels (PDS Suppl. 1)
| 3280.304(b)(1)
|
| APA–S 812P–1992, Design and Fabrication of Glued Plywood-Lumber Beams, Suppl. 2
| 3280.304(b)(1)
|
| APA–S 812Q–1992, Design and Fabrication of Glued Plywood-Lumber Beams (PDS Suppl. 2)
| 3280.304(b)(1)
|
| APA–U 813K–1990, Design and Fabrication of Plywood Stressed-Skin Panels, Suppl. 3
| 3280.304(b)(1)
|
| APA–U 813L–1990, Design and Fabrication of Plywood Stressed-Skin Panels, Suppl. 3
| 3280.304(b)(1)
|
| APA–U 814G–1990, Design and Fabrication of Plywood Sandwich Panels, Suppl. 4
| 3280.304(b)(1)
|
| APA–H 815E–1995, Design and Fabrication of All-Plywood Beams, (PDS Suppl. 5)
| 3280.304(b)(1)
|
| PS–2–92 (also known as NIST Standard PS 2-96), Voluntary Product Standard Performance Standard for Wood-Based Structural Use Panels
| 3280.304(b)(1)
|
Air Conditioning and Refrigation Institute
1501 Wilson Boulevard, Arlington, VA 22209–2403
|
| ANSI/ARI 210/240–89, Unitary Air-Conditioning and Air-Source Heat Pump Equipment
| 3280.511(b); 3280.703; 3280.714(a)(1); 3280.714(a)(1)(ii); 3280.714(a)(1)(iii)
|
American Society of Civil Engineers
1015 15th Street NW, Washington, DC 20005
|
| ANSI/ASCE 7–88, American Society of Civil Engineers, Minimum Design Loads for Buildings and Other Structures
| 3280.5; 3280.304(b)(1); 3280.305(c)(1) (ii)(A); 3280.305(c)(2) (iii)(A); 3282.362(c)(3)(i)(E)
|
| SEI/ASCE 8–02, Specification for the Design of Cold-Formed Stainless Steel Structural Members
| 3280.5; 304(b)(1); 3280.305(j)
|
| ASCE 19–96, Structural Applications of Steel Cables for Buildings
| 3280.304(b)(1)
|
American Society of Heating, Refrigeration and Air Conditioning Engineers
1791 Tullie Circle, NE., Atlanta, GA 30329
|
| 1997 ASHRAE Handbook of Fundamentals, Inch-Pound Edition
| 3280.508; 3280.511
|
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE-ASME
|
| 1992 ASME Boiler and Pressure Vessel Code, VIII, Pressure Vessels, Division 1
| 3280.704(b)(2)
|
| ASME A112.1.2–1991, Air Gaps in Plumbing Systems
| 3280.604(a)
|
| ASME A112.18.3M–1996, Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
| 3280.604(b
|
| ASME A112.18.6–1999, Flexible Water Connectors
| 3280.604(b)
|
| ASME A112.18.7–1999 Deck Mounted Bath/Shower Transfer Valves with Integral Backflow Protection
| 3280.604(a)
|
| ASME A112.19.6–1995 Hydraulic Performance Requirements for Water Closets and Urinals
| 3280.604(b)
|
| ASME/ANSI A112.19.7m–1987 Whirlpool Bathtub Appliances
| 3280.604(a)
|
| ASME/ANSI A112.19.8M–1989, Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, Hot Tubs and Whirlpool Bathtub Appliances
| 3280.604(a)
|
| ASME A112.19.9M–1991 Non-Vitreous Ceramic Plumbing Fixtures
| 3280.604(a)
|
| ASME A112.19.10–1994 Dual Flush Devices for Water Closets
| 3280.604(b)
|
American Society of Sanitary Engineering
P.O. Box 40362, Bay Village, OH 44140
|
| ASSE Standard 1001 ASSE/ANSI–1990 Performance Requirements for Pipe Applied Atmospheric Type Vacuum Breakers
| 3280.604(a)
|
| ASSE Standard 1002 Revision 5–1986, (ANSI/ASSE–1979) Performance Requirements for Water Closet Flush Tank Fill Valves (Ballcocks)
| 3280.604(a)
|
| ASSE Standard 1006, ASSE/ANSI–1986, Plumbing Requirements for Residential Use (Household) Dishwashers
| 3280.604(a)
|
| ASSE Standard 1007–1986, Performance Requirements for Home Laundry Equipment
| 3280.604(a)
|
| ASSE Standard 1008–1986 Performance Requirements for Household Food Waste Disposer Units
| 3280.604(a)
|
| ASSE Standard 1011–1981 (ANSI–1982), Performance Requirements for Hose Connection Vacuum Breakers
| 3280.604(a)
|
| ASSE Standard 1014–1989 (ANSI–1990), Performance Requirements for Hand-held Showers
| 3280.604(a)
|
| ASSE Standard 1016–1988, (ANSI 1990), Performance Requirements for Individual Thermostatic Pressure Balancing and Combination Control for Bathing Facilities
| 3280.604(a)
|
| ASSE Standard 1017–1986, Performance Requirements for Temperature Activated Mixing Valves for Primary Domestic Use
| 3280.604(a)
|
| ANSI/ASSE Standard 1019–1978, Performance Requirements for Wall Hydrants, Frost Proof Automatic Draining, Anti-Backflow Types
| 3280.604(a)
|
| ASSE Standard 1023–ANSI/ASSE–1979, Performance Requirements for Hot Water Dispensers, Household Storage Type Electrical
| 3280.604(a)
|
| ASSE Standard 1025–ANSI/ASSE–1978, Performance Requirements for Diverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications
| 3280.604(a)
|
| ASSE Standard 1037–1990 (ANSI–1990), Performance Requirements for Pressurized Flushing Devices (Flushometers) For Plumbing Fixtures
| 3280.604(a)
|
| ASSE Standard 1051, revised 1996 (ANSI–approved 1998), Performance Requirements for Air Admittance Valves for Plumbing Drainage Systems—Fixture and Branch Devices
| 3280.604(a)
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, Telephone (610) 832-9585, FAX (610) 832-9555
|
| ASTM A53–93, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
| 3280.604(a); 3280.703
|
| ASTM A74–92, Standard Specification for Cast Iron Soil Pipe and Fittings
| 3280.604(a)
|
| ASTM A539–99, Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines
| 3280.703; 3280.705(b)(4)
|
| ASTM B42–93, Standard Specification for Seamless Copper Pipe, Standard Sizes
| 3280.604(a); 3280.703
|
| ASTM B43–91, Standard Specification for Seamless Red Brass Pipe, Standard Sizes
| 3280.604(a); 3280.705(b)(1)
|
| ASTM B 88–93, Standard Specification for Seamless Copper Water Tube
| 3280.604(a); 3280.703; 3280.705(b)(3); 3280.706(b)(3)
|
| ASTM B251–93, Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
| 3280.604(a); 3280.703
|
| ASTM B280–95, Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
| 3280.703; 3280.705(b)(3); 3280.706(b)(3)
|
| ASTM B306–92, Standard Specification for Copper Drainage Tube (DWV)
| 3280.604(a)
|
| ASTM C36/C36M–99, Standard Specification for Gypsum Wallboard
| 3280.304(b)(1)
|
| ASTM C564–88, Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
| 3280.604(a); 3280.611)(d)(5)
|
| ASTM D781–68 (73), Standard Test Methods for Puncture and Stiffness of Paperboard, and Corrugated and Solid Fiberboard
| 3280.304(b)(1); 3280.305(g)(4)
|
| ASTM D2235–88, Standard Specification for Solvent Cement for Acrlonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
| 3280.604(a)
|
| ASTM D2564–91a, Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
| 3280.604(a)
|
| ASTM D2661–91, Standard Specification Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
| 3280.604(a)
|
| ASTM D2665–91b, Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
| 3280.604(a)
|
| ASTM D2846–92, Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
| 3280.604(a)
|
| ASTM D3309–92a, Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
| 3280.604(a)
|
| ASTM D3311–92, Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
| 3280.604(a)
|
| ASTM D3953–91, Standard Specification for Strapping, Flat Steel and Seals
| 3280.306(g); 3280.306(b)(2)(v)
|
| ASTM D4442–92 (Reapproved 1997), Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
| 3280.304(b)(1)
|
| ASTM D4444–92, Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
| 3280.304(b)(1)
|
| ASTM E84–01, Standard Test Method for Surface Burning Characteristics of Building Materials
| 3280.203(a)
|
| ASTM E96–95, Standard Test Methods for Water Vapor Transmission of Materials
| 3280.504(a) and (c)
|
| ASTM E162–94, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
| 3280.203(a)
|
| ASTM E773–97, Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
| 3280.403(d)(2)
|
| ASTM E774–97, Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units
| 3280.403(d)(2)
|
| ASTM E1333–96, Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
| 3280.406(b)
|
| ASTM F628–91 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40, Plastic Drain, Waste, and Vent Pipe with a Cellular Core
| 3280.604(a)
|
Cast Iron Soil Pipe Institute
5959 Shallowford Rd., Suite 419, Chattanooga, TN 37421
|
| CISPI–301–90, Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
| 3280.604(a)
|
| CISPI–310–90, Specification for Coupling For Use in Connection With Hubless Cast Iron Soil Pipe and Fittings For Sanitary and Storm Drain, Waste, and Vent Piping Applications
| 3280.604(a)
|
| CISPI–HSN–85, Specification for Neoprene Rubber Gaskets for HUB and Spigot Cast Iron Soil Pipe and Fittings
| 3280.611(d)(5)
|
Department of Commerce, National Institute of Standards and Technology
Office of Engineering Standards, Room A–166, Technical Building, Washington, DC 20234
|
| PS–1–95, Voluntary Product Standard, Construction and Industrial Plywood (with typical APA trademarks)
| 3280.304(b)(1)
|
Federal Specification, General Services Administration
Specification Branch, Room 6039, GSA Building, 7th & D Sts., SW., Washington, DC 20407
|
| WW–P–541E/GEN–1980, Plumbing Fixtures (General Specifications)
| 3280.604(a)
|
| ZZ–R–765B–1970, With 1971 Amendment 1, Rubber Silicone
| 3280.611(d)(5)
|
Hardwood Plywood and Veneer Association
P.O. Box 2789, Reston, VA 20195
|
| HPVA Design Guide HP–SG–96, Structural Design Guide for Hardwood Plywood Wall Panels, revised 1996
| 3280.304(b)(1)
|
| ANSI/HPVA Standard HP–1–94 (Approved 1995), American National Standard for Hardwood and Decorative Plywood
| 3280.304(b)(1)
|
HUD–FHA Use of Materials Bulletin
Department of Housing and Urban Development, 451 7th Street SW., Washington, DC 20410–8000
|
HUD USER
P.O. Box 280, Germantown, MD 20874
|
| HUD User-0005945, Overall U-Values and Heating/Cooling Loads-Manufactured Homes, PNL 8006, February 1992
| 3280.508(b)
|
IIT Research Institute
10 West 35th Street, Chicago, IL 60616
|
| IITRI Fire and Safety Research Project J6461–79, Development of Mobile Home Fire Test Methods to Judge the Fire-Safe Performance of Foam Plastic Sheathing and Cavity Insulation
| 3280.207(a)
|
International Association of Plumbing and Mechanical Officials
20001 Walnut Drive South, Walnut, CA 91789–2825
|
| IAPMO PS 2–89, Material and Property Standard for Cast Brass and Tubing P-Traps
| 3280.604(a)
|
| IAPMO PS 4–90, Material and Property Standard for Drains for Prefabricated and Precast Showers
| 3280.604(a)
|
| IAPMO PS 5–84, Material and Property Standard for Special Cast Iron Fittings
| 3280.604(a)
|
| IAPMO PS 9–84, Material and Property Standard for Diversion Tees and Twin Waste Elbow
| 3280.604(a)
|
| IAPMO PS 14–89, Material and Property Standard for Flexible Metallic Water Connectors
| 3280.604(a)
|
| IAPMO PS 23–89, Material and Property Standard for Dishwasher Drain Airgaps
| 3280.604(a)
|
| IAPMO PS 31–91, Material and Property Standards for Backflow Prevention Assemblies
| 3280.604(a)
|
| IAPMO TSC 9–97, Standard for Gas Supply Connectors for Manufactured Mobile Homes
| 3280.703
|
| IAPMO TSC 22–85, Standard for Porcelain Enameled Formed Steel Plumbing Fixtures
| 3280.604(a)
|
International Code Council (formerly National Evaluation Service)
5360 Workman Mill Road, Whittier, California 90601-0543
|
| National Evaluation Report 272 (Reissued September 1, 1997): Power-Driven Staples and Nails for Use in all Types of Building Construction
| 3280.304(b)
|
Department of Defense
Naval Publications Information Center, 5801 Tabor Road, Philadelphia, PA 19120
|
| Military specifications:
|
| MIL–L–10547E–1975, Liners, Case, and Sheet Overwarp; Water-Vapor Proof or Waterproof, Flexible
| 3280.611(d)(5)
|
National Electrical Manufacturers Association
1300 North 17th Street, Suite 1847, Rosslyn, VA 22209
|
| ANSI/NEMA WD 6-1997, Wiring Devices—Dimensional Specifications
| 3280.803
|
National Fenestration Rating Council, Incorporated
1300 Spring Street, Suite 120, Silver Spring, MD 20910
|
| NFRC 100: Procedure for Determining Fenestration Product U-factors, 1997
| 3280.508(e)
|
National Fire Protection Association
Batterymarch Park, Quincy, MA 02269-9101, Telephone: (800) 344-3555
|
| NFPA 31, Standard for the Installation of Oil-Burning Equipment, 1997 Edition
| 3280.703; 3280.707(f)
|
| NFPA 54–2002 ANSI Z223.1-2002, National Fuel Gas Code
| 3280.703
|
| NFPA–58, Liquefied Petroleum Gas Code, 2001 Edition
| 3280.703; 3280.704(b)(5)(i)
|
| NFPA–70–2005, National Electrical Code
| 3280.801 (a) and (b); 3280.8093(k)(1); 3280.803(k)(3); 3280.805(a)(3)(iv); 3280.806(a)(2); 3280.808(a); 3280.808(m); 3280.811(b)
|
| NFPA–90B, Warm Air Heating and Air Conditioning Systems, 1993 Edition
| 3280.703
|
| NFPA–220, Standard on Types of Building Construction, Chapter 2: definitions of “limited combustible” and “noncombustible material”, 1995 Edition
| 3280.202(a)(4) and (5)
|
| NFPA–255, Standard Method of Test of Surface Burning Characteristics of Building Materials, 1996
| 3280.203
|
National Sanitation Foundation
P.O. Box 1468, Ann Arbor, MI 48105
|
| ANSI/NSF 14–1990, Plastic Piping Components and Related Materials
| 3280.604(b)
|
| ANSI/BSF 24–1988, Plumbing System Components for Manufactured Homes and Recreational Vehicles
| 3280.604(b)
|
| ANSI/NSF 61–2001, Drinking Water System Components—Health Effects
| 3280.604(b)
|
Society of Automotive Engineers
400 Commonwealth Dr., Warrendale, PA 15096, Telephone: (412) 776–4841
|
| SAE–J533b, Flares for Tubing (1972)
| 3280.703; 3280.705(f)(1); 3280.705(f)(2)
|
Steel Joist Institute
1205 48th Avenue North, Suite A, Myrtle Beach, SC 29577
|
| Standard Specifications Load Tables and Weight Tables for Steel Joist and Joist Girders, Steel Joist Institute 1994, Fortieth edition
| 3280.304(b)(1)
|
Truss Plate Institute
583 D’Onofrio Drive, Suite 200, Madison, WI 53719
|
| TPI–85, Design Specifications for Metal Plate Connected Wood Trusses
| 3280.304(b)(1)
|
Underwriters' Laboratories, Inc
333 Pfingsten Road, Northbrook, Illinois 60062. Standards are available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
|
| UL 94-Fifth Edition with 2001 revisions, Test for Flammability of Plastic Materials for Parts in Devices and Appliances
| 3280.715(e)(1)
|
| UL 103-Ninth Edition—1995 with 1999 Revisions, Chimneys, Factory-Built Residential Type and Building Heating Appliances
| 3280.703
|
| UL 109-Sixth Edition—with 2001 revisions, Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
| 3280.703
|
| UL 127-Seventh Edition (1996) with 1999 Revisions, Factory-Built Fireplaces
| 3280.703
|
| UL 174-Tenth Edition (1996) with 1997 Revisions, Household Electric Storage Tank Water Heaters
| 3280.703
|
| UL 181-Ninth Edition (1996) with 1998 Revisions, Factory Made Air Ducts and Air Connectors
| 3280.703; 3280.715(e)
|
| UL 181A-Second Edition (1994) with 1998 revisions, Closure Systems for Use with Rigid Air Ducts and Air Connectors
| 3280.703; 3280.715(e)
|
| UL 181B-First Edition with 1998 Revisions, Closure Systems for Use with Flexible Air Ducts and Air Connectors
| 3280.703; 3280.715(e)
|
| UL 217-Fifth Edition-January 4, 1999, Single and Multiple Station Smoke Alarms
| 3280.208
|
| UL 268-Fourth Edition-January 4, 1999, Smoke Detectors for Fire Protective Signaling Systems
| 3280.208
|
| UL 307A-Seventh Edition, with 1997 revisions, Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles
| 3280.703; 3280.707(f)
|
| UL 307B-Fourth Edition with 1998 Revisions, Gas Burning Heating Appliances for Mobile Homes and Recreational Vehicles
| 3280.703
|
| UL 311-Eighth Edition with 1998 revisions, Roof Jacks for Manufactured Homes and Recreational Vehicles
| 3280.703
|
| UL 441-Ninth Edition-1996 with 1999 revisions, Gas Vents
| 3280.703
|
| UL 559-Fourth Edition-1987 with Revision December 24, 1987, Heat Pumps
| 3280.703
|
| UL 569-Seventh Edition, 1995 with 2001 revisions, Pigtail and Flexible Hose Connectors for LP-Gas
| 3280.703; 3280.705
|
| UL 737-Eighth Edition, 1996 with 2000 revisions, Fireplace Stoves
| 3280.703
|
| UL 1042-Fourth Edition 1994, with 1998 revisions, Electric Baseboard Heating Equipment
| 3280.703
|
| UL 1096-Fourth Edition-1986 with Revisions July 16, 1986 and January 30, 1988, Electric Central Air Heating Equipment
| 3280.703
|
| UL 1482-Fifth Edition, 1996 with 2000 revisions, Solid-Fuel Type Room Heaters
| 3280.703
|
| UL 1995-Second Edition, with 1999 revisions, Heating and Cooling Equipment
| 3280.703
|
| UL 2021-Second Edition, with 1998 revisions, Fixed and Location-Dedicated Electric Room Heaters
| 3280.703
|
WDMA (NWWDA) Window and Door Manufacturers Association (formerly the National Wood Window and Door Association)
1400 East Toughy Avenue, Suite 470, Des Plains, IL 60018 Telephone: (847) 299-5200
|
| ANSI/AAMA/WDMA 101–I.S. 2–97, Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors
| 3280.304(b)(1), 3280.403(b), 3280.404(b) |
