|
The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html.
23 CFR
FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
| 23 CFR
| American Association of State Highway and Transportation Officials
444 N. Capitol St., NW, Suite 249, Washington, DC 20001
| | Guide for Accomodating Utilities within Highway Right-of-Way, 1981
| 645.211
| | Guide to Metric Conversion, AASHTO, 1993
| 655.601
| | The Manual for Bridge Evaluation, First Edition, 2008
| 650.305; 650.313
| | Policy on Design Standards—Interstate Systems, 2005
| 625.4(a)
| | Policy on Geometric Design of Highways and Streets, 2001
| 625.4(a)
| | Roadside Design Guide, Chapter 9: “Traffic Barriers, Traffic Control Devices, and Other Safety Features for Work Zones,” 2002 edition
| 630.1012(b)
| | Standard Specifications for Highway Bridges, Fifteenth Ed., 1992, and Interim Specifications, Bridges, 1993 through 1995
| 625.4(b)
| | AASHTO LRFD Bridge Design Specifications, First Edition, 1994 (U.S. Units)
| 625.4(b)
| | AASHTO LRFD Bridge Design Specifications, First Edition, 1994 (SI Units)
| 625.4(b)
| | Standard Specifications for Movable Highway Bridges, 1988
| 625.4(b)
| | Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals, 1994 and Interim Specifications, Bridges, 1986 through 1988
| 625.4(b)
| | Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Parts I and Part II, 1986
| 625.4(c)
| | Traffic Engineering Metric Conversion Factors, 1993—Addendum to the Guide to Metric Conversion, AASHTO, October 1993
| 655.601
| American Welding Society
2501 NW 7th St., Miami, FL 33125
| | AWS D 12.1–75 Reinforcing Steel Welding Code
| 625.3(b)
| | AWSD 1.4–79 Reinforcing Steel Welding Code
| 625.4(b)(4)
| | ANSI/AASHTO/AWS D1.5–95 Bridge Welding Code, 1995
| 625.4(b)
| | ANSI/AWS D1.4-92 Structural Welding Code—Reinforcing Steel
| 625.4(b)
| Federal Highway Administration
400 Seventh Street SW, Room 3408, Washington, DC 20590, http://mutcd.fhwa.dot.gov
| | Manual on Uniform Traffic Control Devices (MUTCD) for Streets and Highways, 2009 Edition, November 4, 2009
| 655.601(a)
| | Standard Alphabets for Highway Signs, FHWA, 1966, Reprinted May 1972
| 625.3(c)
| | “FHWA Traffic Noise Model,” Report No. FHWA-PD-96-010, including Revision No. 1, dated April 14, 2004
| 772.17 |
|
