e-CFR data is current as of February 26, 2021
TITLE 46—Shipping
CHAPTER I—COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBCHAPTER F—MARINE ENGINEERING PART 58—MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS
Subpart 58.01—GENERAL REQUIREMENTS
|
Means of stopping machinery. |
|
|
Main propulsion auxiliary machinery. |
|
|
Machinery, angles of inclination. |
|
|
Machinery space, ventilation. |
|
|
Tanks for flammable and combustible oil. |
|
Subpart 58.03—INCORPORATION OF STANDARDS
|
Incorporation by reference. |
|
Subpart 58.05—MAIN PROPULSION MACHINERY
|
Material, design and construction. |
|
Subpart 58.10—INTERNAL COMBUSTION ENGINE INSTALLATIONS
|
Gasoline engine installations. |
|
|
Diesel engine installations. |
|
|
Gas turbine installations. |
|
Subpart 58.16—LIQUEFIED PETROLEUM GASES FOR COOKING AND HEATING
|
Use of liquefied petroleum gas. |
|
|
Valves and safety relief devices. |
|
|
Ventilation of compartments containing gas-consuming appliances. |
|
Subpart 58.20—REFRIGERATION MACHINERY
|
Pressure relieving devices. |
|
|
Installation of refrigerating machinery. |
|
Subpart 58.25—STEERING GEAR
|
Main and auxiliary steering gear. |
|
|
Piping for steering gear. |
|
|
Indicating and alarm systems. |
|
|
Arrangement of the steering-gear compartment. |
|
|
Overcurrent protection for steering-gear systems. |
|
|
Non-duplicated hydraulic rudder actuators. |
|
|
Steering-gear control systems. |
|
|
Automatic pilots and ancillary steering gear. |
|
|
Special requirements for tank vessels. |
|
Subpart 58.30—FLUID POWER AND CONTROL SYSTEMS
|
Pipe, tubing, valves, fittings, pumps, and motors. |
|
|
Fluid power hose and fittings. |
|
|
Requirements for miscellaneous fluid power and control systems. |
|
Subpart 58.50—INDEPENDENT FUEL TANKS
|
Alternate material for construction of independent fuel tanks. |
|
Subpart 58.60—INDUSTRIAL SYSTEMS AND COMPONENTS ON MOBILE OFFSHORE DRILLING UNITS (MODU)
|
Alternatives and substitutions. |
|
|
Industrial systems: Locations. |
|
|
Industrial systems: Piping. |
|
|
Industrial systems: Design. |
|
|
Analyses, plans, diagrams and specifications: Submission. |
|
|