Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

Electronic Code of Federal Regulations

We invite you to try out our new beta eCFR site at https://ecfr.federalregister.gov. We have made big changes to make the eCFR easier to use. Be sure to leave feedback using the Help button on the bottom right of each page!

e-CFR data is current as of October 22, 2020

Title 46Chapter ISubchapter QPart 162


TITLE 46—Shipping

CHAPTER I—COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)

SUBCHAPTER Q—EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL

PART 162—ENGINEERING EQUIPMENT

rule

Subpart 162.017—GENERAL PROVISIONS; VALVES, PRESSURE-VACUUM RELIEF, FOR TANK VESSELS

§162.017-1
Preemptive effect; incorporation by reference.
§162.017-2
Type.
§162.017-3
Materials, construction, and workmanship.
§162.017-4
Inspections and testing.
§162.017-5
Marking.
§162.017-6
Procedure for approval.
rule

Subpart 162.018—SAFETY RELIEF VALVES, LIQUEFIED COMPRESSED GAS

§162.018-1
Applicable specifications, and referenced material.
§162.018-2
Scope.
§162.018-3
Materials.
§162.018-4
Construction and workmanship.
§162.018-5
Blow-down adjustment and popping tolerance.
§162.018-6
Marking.
§162.018-7
Flow rating tests.
§162.018-8
Procedure for approval.
rule

Subpart 162.027—COMBINATION FIREHOSE NOZZLES

§162.027-1
Scope.
§162.027-2
Incorporation by reference.
§162.027-3
Design, construction, testing, and marking requirements.
§162.027-4
Approval procedures.
rule

Subpart 162.028—EXTINGUISHERS, FIRE, PORTABLE, MARINE TYPE

§162.028-1
Incorporation by reference.
§162.028-2
Classification.
§162.028-3
Requirements.
§162.028-4
Marine type label.
§162.028-5
Recognized laboratories.
§162.028-6
Examinations, tests, and inspections.
§162.028-7
Procedure for listing and labeling.
§162.028-8
Termination of listing or labeling.
rule

Subpart 162.039—EXTINGUISHERS, FIRE, SEMI-PORTABLE, MARINE TYPE

§162.039-1
Incorporation by reference.
§162.039-2
Classification.
§162.039-3
Requirements.
§162.039-4
Marine type label.
§162.039-5
Recognized laboratories.
§162.039-6
Examinations, tests, and inspections.
§162.039-7
Procedure for listing and labeling.
§162.039-8
Termination of listing or labeling.
rule

Subpart 162.050—POLLUTION PREVENTION EQUIPMENT

§162.050-1
Scope.
§162.050-3
Definitions.
§162.050-4
Incorporation by reference: Where can I get a copy of the publications mentioned in this part?
§162.050-5
Contents of application.
§162.050-7
Approval procedures.
§162.050-9
Test report.
§162.050-11
Marking.
§162.050-13
Factory production and inspection.
§162.050-15
Designation of facilities.
§162.050-17
Separator test rig.
§162.050-19
Oil content meter and bilge alarm test rig.
§162.050-20
Separator and bilge alarm test fluids.
§162.050-21
Separator: Design specification.
§162.050-23
Separator: Approval tests.
§162.050-25
Cargo monitor: Design specification.
§162.050-27
Oil content meter: Approval tests.
§162.050-33
Bilge alarm: Design specification.
§162.050-35
Bilge alarm: Approval tests.
§162.050-37
Vibration test.
§162.050-39
Measurement of oil content.
rule

Subpart 162.060—BALLAST WATER MANAGEMENT SYSTEMS

§162.060-1
Purpose and scope.
§162.060-3
Definitions.
§162.060-5
Incorporation by reference.
§162.060-10
Approval procedures.
§162.060-12
Use and acceptance of existing test data.
§162.060-14
Information requirements for the ballast water management system (BWMS) application.
§162.060-16
Changes to an approved ballast water management system (BWMS).
§162.060-18
Suspension, withdrawal, or termination of approval.
§162.060-20
Design and construction requirements.
§162.060-22
Marking requirements.
§162.060-24
Test Plan requirements.
§162.060-26
Land-based testing requirements.
§162.060-28
Shipboard testing requirements.
§162.060-30
Testing requirements for ballast water management system (BWMS) components.
§162.060-32
Testing and evaluation requirements for active substances, preparations, and relevant chemicals.
§162.060-34
Test Report requirements.
§162.060-36
Quality Assurance Project Plan (QAPP) requirements.
§162.060-38
Operation, Maintenance, and Safety Manual (OMSM).
§162.060-40
Requirements for Independent Laboratories (ILs).
§162.060-42
Responsibilities for Independent Laboratories (ILs).
rule

Subpart 162.161—FIXED CLEAN AGENT FIRE EXTINGUISHING SYSTEMS

§162.161-1
Scope.
§162.161-2
Incorporation by reference.
§162.161-3
Materials.
§162.161-4
Construction.
§162.161-5
Instruction manual for design, installation, operation, and maintenance.
§162.161-6
Tests for approval.
§162.161-7
Inspections at production.
§162.161-8
Marking.
§162.161-9
Procedure for approval.
rule

Subpart 162.163—PORTABLE FOAM APPLICATORS

§162.163-1
Scope.
§162.163-2
Incorporation by reference.
§162.163-3
Performance, design, construction, testing, and marking requirements.
§162.163-4
Approval procedures.

Need assistance?