e-CFR data is current as of September 22, 2020
TITLE 40—Protection of Environment
CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SUBCHAPTER I—SOLID WASTES (CONTINUED) PART 261—IDENTIFICATION AND LISTING OF HAZARDOUS WASTE
Subpart A—GENERAL
|
| Definition of solid waste. |
|
|
| Definition of hazardous waste. |
|
|
| Requirements for recyclable materials. |
|
|
| Residues of hazardous waste in empty containers. |
|
|
| PCB wastes regulated under Toxic Substance Control Act. |
|
|
| Requirements for Universal Waste. |
|
Subpart B—CRITERIA FOR IDENTIFYING THE CHARACTERISTICS OF HAZARDOUS WASTE AND FOR LISTING HAZARDOUS WASTE
|
| Criteria for identifying the characteristics of hazardous waste. |
|
|
| Criteria for listing hazardous waste. |
|
Subpart C—CHARACTERISTICS OF HAZARDOUS WASTE
|
| Characteristic of ignitability. |
|
|
| Characteristic of corrosivity. |
|
|
| Characteristic of reactivity. |
|
Subpart D—LISTS OF HAZARDOUS WASTES
|
| Hazardous wastes from non-specific sources. |
|
|
| Hazardous wastes from specific sources. |
|
|
| Discarded commercial chemical products, off-specification species, container residues, and spill residues thereof. |
|
|
| Deletion of certain hazardous waste codes following equipment cleaning and replacement. |
|
Subpart E—EXCLUSIONS/EXEMPTIONS
|
| Conditional Exclusion for Used, Broken Cathode Ray Tubes (CRTs) and Processed CRT Glass Undergoing Recycling. |
|
|
| Conditional Exclusion for Used, Intact Cathode Ray Tubes (CRTs) Exported for Recycling. |
|
|
| Notification and Recordkeeping for Used, Intact Cathode Ray Tubes (CRTs) Exported for Reuse. |
|
Subparts F-G [Reserved]
Subpart H—FINANCIAL REQUIREMENTS FOR MANAGEMENT OF EXCLUDED HAZARDOUS SECONDARY MATERIALS
|
| Definitions of terms as used in this subpart. |
|
|
| Financial assurance condition. |
|
|
| Incapacity of owners or operators, guarantors, or financial institutions. |
|
|
| Use of State-required mechanisms. |
|
|
| State assumption of responsibility. |
|
|
| Wording of the instruments. |
|
Subpart I—USE AND MANAGEMENT OF CONTAINERS
|
| Compatibility of hazardous secondary materials with containers. |
|
|
| Management of containers. |
|
|
| Special requirements for ignitable or reactive hazardous secondary material. |
|
|
| Special requirements for incompatible materials. |
|
Subpart J—TANK SYSTEMS
|
| Assessment of existing tank system's integrity. |
|
|
| Containment and detection of releases. |
|
|
| General operating requirements. |
|
|
| Response to leaks or spills and disposition of leaking or unfit-for-use tank systems. |
|
|
| Termination of remanufacturing exclusion. |
|
|
| Special requirements for ignitable or reactive materials. |
|
|
| Special requirements for incompatible materials. |
|
Subparts K-L [Reserved]
Subpart M—EMERGENCY PREPAREDNESS AND RESPONSE FOR MANAGEMENT OF EXCLUDED HAZARDOUS SECONDARY MATERIALS
|
| Preparedness and prevention. |
|
|
| Emergency procedures for facilities generating or accumulating 6000 kg or less of hazardous secondary material. |
|
|
| Contingency planning and emergency procedures for facilities generating or accumulating more than 6000 kg of hazardous secondary material. |
|
Subparts N-Z [Reserved]
Subpart AA—AIR EMISSION STANDARDS FOR PROCESS VENTS
|
| Standards: Process vents. |
|
|
| Standards: Closed-vent systems and control devices. |
|
|
| Test methods and procedures. |
|
|
| Recordkeeping requirements. |
|
Subpart BB—AIR EMISSION STANDARDS FOR EQUIPMENT LEAKS
|
| Standards: Pumps in light liquid service. |
|
|
| Standards: Pressure relief devices in gas/vapor service. |
|
|
| Standards: Sampling connection systems. |
|
|
| Standards: Open-ended valves or lines. |
|
|
| Standards: Valves in gas/vapor service or in light liquid service. |
|
|
| Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors. |
|
|
| Standards: Delay of repair. |
|
|
| Standards: Closed-vent systems and control devices. |
|
|
| Alternative standards for valves in gas/vapor service or in light liquid service: percentage of valves allowed to leak. |
|
|
| Alternative standards for valves in gas/vapor service or in light liquid service: skip period leak detection and repair. |
|
|
| Test methods and procedures. |
|
|
| Recordkeeping requirements. |
|
Subpart CC—AIR EMISSION STANDARDS FOR TANKS AND CONTAINERS
|
| Material determination procedures. |
|
|
| Standards: Closed-vent systems and control devices. |
|
|
| Inspection and monitoring requirements. |
|
|
| Recordkeeping requirements. |
|
|
| Appendixes II-III to Part 261 [Reserved] |
|
| 