e-CFR data is current as of March 1, 2021
TITLE 40—Protection of Environment
CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SUBCHAPTER U—AIR POLLUTION CONTROLS PART 1045—CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS
Subpart A—OVERVIEW AND APPLICABILITY
|
Does this part apply for my products? |
|
|
Who is responsible for compliance? |
|
|
Which engines are excluded from this part's requirements? |
|
|
How is this part organized? |
|
|
Do any other CFR parts apply to me? |
|
|
What requirements apply to my vessels? |
|
|
How do the requirements related to evaporative emissions apply to engines and their fuel systems? |
|
|
Submission of information. |
|
Subpart B—EMISSION STANDARDS AND RELATED REQUIREMENTS
|
What exhaust emission standards and requirements must my engines meet? |
|
|
What exhaust emission standards must my outboard and personal watercraft engines meet? |
|
|
What exhaust emission standards must my sterndrive/inboard engines meet? |
|
|
What are the not-to-exceed emission standards? |
|
|
How must my engines diagnose malfunctions? |
|
|
What are the standards for evaporative emissions? |
|
|
What other requirements apply? |
|
|
What emission-related warranty requirements apply to me? |
|
|
What maintenance instructions must I give to buyers? |
|
|
What installation instructions must I give to vessel manufacturers? |
|
|
How must I label and identify the engines I produce? |
|
|
What is my engine's maximum engine power? |
|
|
Are there interim provisions that apply only for a limited time? |
|
Subpart C—CERTIFYING ENGINE FAMILIES
|
What are the general requirements for obtaining a certificate of conformity? |
|
|
What must I include in my application? |
|
|
May I get preliminary approval before I complete my application? |
|
|
How do I amend the maintenance instructions in my application? |
|
|
How do I amend my application for certification to include new or modified engines or change an FEL? |
|
|
How do I select engine families? |
|
|
What emission testing must I perform for my application for a certificate of conformity? |
|
|
How do I demonstrate that my engine family complies with exhaust emission standards? |
|
|
How do I determine deterioration factors from exhaust durability testing? |
|
|
What records must I keep and what reports must I send to EPA? |
|
|
What decisions may EPA make regarding my certificate of conformity? |
|
Subpart D—TESTING PRODUCTION-LINE ENGINES
|
When must I test my production-line engines? |
|
|
How must I prepare and test my production-line engines? |
|
|
How must I select engines for production-line testing? |
|
|
How do I know when my engine family fails the production-line testing requirements? |
|
|
What happens if one of my production-line engines fails to meet emission standards? |
|
|
What happens if an engine family fails the production-line testing requirements? |
|
|
May I sell engines from an engine family with a suspended certificate of conformity? |
|
|
How do I ask EPA to reinstate my suspended certificate? |
|
|
When may EPA revoke my certificate under this subpart and how may I sell these engines again? |
|
|
What production-line testing records must I send to EPA? |
|
|
What records must I keep? |
|
Subpart E—IN-USE TESTING
|
What testing requirements apply to my engines that have gone into service? |
|
|
How does this program work? |
|
|
How must I select, prepare, and test my in-use engines? |
|
|
What happens if in-use engines do not meet requirements? |
|
|
What in-use testing information must I report to EPA? |
|
|
What records must I keep? |
|
Subpart F—TEST PROCEDURES
|
How do I run a valid emission test? |
|
|
How do I test engines using discrete-mode or ramped-modal duty cycles? |
|
|
What are the test procedures related to not-to-exceed standards? |
|
|
What testing must I perform to establish deterioration factors? |
|
Subpart G—SPECIAL COMPLIANCE PROVISIONS
|
What compliance provisions apply to these engines? |
|
|
What provisions apply to engines already certified under the motor vehicle or Large SI programs? |
|
|
What provisions apply to using engines already certified to Small SI emission standards? |
|
|
What are the provisions for exempting engines used solely for competition? |
|
|
What requirements apply under the Diurnal Transition Program? |
|
|
What is the personal-use exemption. |
|
|
What special provisions apply for small-volume engine manufacturers? |
|
|
What special provisions apply to branded engines? |
|
|
What special provisions apply for converting an engine to use an alternate fuel? |
|
|
Do delegated-assembly provisions apply for marine engines? |
|
|
What special provisions apply for installing and removing altitude kits? |
|
|
How do I certify outboard or personal watercraft engines for use in jet boats? |
|
Subpart H—AVERAGING, BANKING, AND TRADING FOR CERTIFICATION
|
How do I generate and calculate exhaust emission credits? |
|
|
How do I generate and calculate evaporative emission credits? |
|
|
How do I average emission credits? |
|
|
How do I bank emission credits? |
|
|
How do I trade emission credits? |
|
|
What must I include in my application for certification? |
|
|
What ABT reports must I send to EPA? |
|
|
What records must I keep? |
|
|
What can happen if I do not comply with the provisions of this subpart? |
|
Subpart I—DEFINITIONS AND OTHER REFERENCE INFORMATION
|
What definitions apply to this part? |
|
|
What symbols, acronyms, and abbreviations does this part use? |
|
|
What materials does this part reference? |
|
|
What provisions apply to confidential information? |
|
|
How do I request a hearing? |
|
|
What reporting and recordkeeping requirements apply under this part? |
|
|