e-CFR data is current as of February 22, 2021
TITLE 40—Protection of Environment
CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SUBCHAPTER U—AIR POLLUTION CONTROLS PART 1039—CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES
Subpart A—OVERVIEW AND APPLICABILITY
|
| Does this part apply for my engines? |
|
|
| Who is responsible for compliance? |
|
|
| Which engines are excluded from this part's requirements? |
|
|
| How is this part organized? |
|
|
| Do any other regulation parts apply to me? |
|
|
| What requirements from this part apply to excluded stationary engines? |
|
|
| Submission of information. |
|
Subpart B—EMISSION STANDARDS AND RELATED REQUIREMENTS
|
| What exhaust emission standards must my engines meet after the 2014 model year? |
|
|
| What exhaust emission standards and phase-in allowances apply for my engines in model year 2014 and earlier? |
|
|
| Are there interim provisions that apply only for a limited time? |
|
|
| What smoke standards must my engines meet? |
|
|
| What evaporative emission standards and requirements apply? |
|
|
| Recording reductant use and other diagnostic functions. |
|
|
| What other requirements apply? |
|
|
| What emission-related warranty requirements apply to me? |
|
|
| What maintenance instructions must I give to buyers? |
|
|
| What installation instructions must I give to equipment manufacturers? |
|
|
| How must I label and identify the engines I produce? |
|
|
| What is my engine's maximum engine power? |
|
Subpart C—CERTIFYING ENGINE FAMILIES
|
| What are the general requirements for obtaining a certificate of conformity? |
|
|
| What must I include in my application? |
|
|
| May I get preliminary approval before I complete my application? |
|
|
| How do I amend my maintenance instructions? |
|
|
| How do I amend my application for certification? |
|
|
| How do I select engine families? |
|
|
| What testing requirements apply for certification? |
|
|
| How do I demonstrate that my engine family complies with exhaust emission standards? |
|
|
| How do I determine deterioration factors from exhaust durability testing? |
|
|
| What records must I keep and what reports must I send to EPA? |
|
|
| What decisions may EPA make regarding my certificate of conformity? |
|
Subpart D—[RESERVED]
Subpart E—IN-USE TESTING
Subpart F—TEST PROCEDURES
|
| How do I run a valid emission test? |
|
|
| How do I test engines using steady-state duty cycles, including ramped-modal testing? |
|
|
| Which duty cycles do I use for transient testing? |
|
|
| What are the test procedures related to not-to-exceed standards? |
|
|
| What testing must I perform to establish deterioration factors? |
|
|
| How do I adjust emission levels to account for infrequently regenerating aftertreatment devices? |
|
Subpart G—SPECIAL COMPLIANCE PROVISIONS
|
| What compliance provisions apply? |
|
|
| What provisions apply to engines certified under the motor-vehicle program? |
|
|
| What provisions apply to vehicles certified under the motor-vehicle program? |
|
|
| What special provisions apply to engines using noncommercial fuels? |
|
|
| What are the provisions for exempting engines used solely for competition? |
|
|
| What requirements apply under the program for equipment-manufacturer flexibility? |
|
|
| What special provisions apply to equipment imported under the equipment-manufacturer flexibility program? |
|
|
| What are the incentives for equipment manufacturers to use cleaner engines? |
|
|
| What are the economic hardship provisions for equipment manufacturers? |
|
|
| What are the hardship provisions for engine manufacturers? |
|
|
| What special provisions apply to engines used for transportation refrigeration units? |
|
|
| What special provisions apply to engines sold in Guam, American Samoa, or the Commonwealth of the Northern Mariana Islands? |
|
|
| Special provisions for use of engines in emergency situations. |
|
|
| Approval of an emergency equipment field modification (EEFM). |
|
|
| Emission standards and certification requirements for auxiliary power units for highway tractors. |
|
Subpart H—AVERAGING, BANKING, AND TRADING FOR CERTIFICATION
|
| How do I generate and calculate emission credits? |
|
|
| How do I average emission credits? |
|
|
| How do I bank emission credits? |
|
|
| How do I trade emission credits? |
|
|
| What must I include in my application for certification? |
|
|
| What ABT reports must I send to EPA? |
|
|
| What records must I keep? |
|
|
| What restrictions apply for using emission credits? |
|
|
| What can happen if I do not comply with the provisions of this subpart? |
|
Subpart I—DEFINITIONS AND OTHER REFERENCE INFORMATION
|
| What definitions apply to this part? |
|
|
| What symbols, acronyms, and abbreviations does this part use? |
|
|
| What provisions apply to confidential information? |
|
|
| How do I request a hearing? |
|
|
| What reporting and recordkeeping requirements apply under this part? |
|
|
| Appendix I to Part 1039 [Reserved] |
|
|
| Appendix V to Part 1039 [Reserved] |
|
| 