e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of December 5, 2019

Title 40Chapter ISubchapter NPart 417 → Subpart M


Title 40: Protection of Environment
PART 417—SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY


Subpart M—Chlorosulfonic Acid Sulfation Subcategory


Contents
§417.130   Applicability; description of the chlorosulfonic acid sulfation subcategory.
§417.131   Specialized definitions.
§417.132   Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§417.133   Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
§417.134   Pretreatment standards for existing sources.
§417.135   Standards of performance for new sources.
§417.136   Pretreatment standards for new sources.

§417.130   Applicability; description of the chlorosulfonic acid sulfation subcategory.

The provisions of this subpart are applicable to discharges resulting from sulfation of alcohols, alkylphenols and alcohol ethoxylates utilizing chlorosulfonic acid as the sulfating agent.

§417.131   Specialized definitions.

For the purpose of this subpart:

(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.

(b) The term anhydrous product shall mean the theoretical product that would result if all water were removed from the actual product.

(c) The term surfactant shall mean those methylene blue active substances amendable to measurement by the method described in “Methods for Chemical Analysis of Water and Wastes,” 1971, Environmental Protection Agency, Analytical Quality Control Laboratory, page 131.

§417.132   Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):

Effluent characteristicEffluent limitations
Maximum for any 1 dayAverage of daily values for 30 consecutive days shall not exceed—
Metric units (kilograms per 1,000 kg of anhydrous product)
BOD50.900.30
COD4.051.35
TSS0.09.03
Surfactants0.90.30
Oil and grease0.15.05
pH(1)(1)
English units (pounds per 1,000 lb of anhydrous product)
BOD50.900.30
COD4.051.35
TSS0.09.03
Surfactants0.90.30
Oil and grease0.15.05
pH(1)(1)

1Within the range 6.0 to 9.0.

[39 FR 13372, Apr. 12, 1974, as amended at 60 FR 33955, June 29, 1995]

§417.133   Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:

Effluent characteristicEffluent limitations
Maximum for any 1 dayAverage of daily values for 30 consecutive days shall not exceed—
Metric units (kilograms per 1,000 kg of anhydrous product)
BOD50.300.15
COD1.50.75
TSS0.04.02
Surfactants0.30.15
Oil and grease0.06.03
pH(1)(1)
English units (pounds per 1,000 lb of anhydrous product)
BOD50.300.15
COD1.50.75
TSS0.04.02
Surfactants0.30.15
Oil and grease0.06.03
pH(1)(1)

1Within the range 6.0 to 9.0.

§417.134   Pretreatment standards for existing sources.

Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart.

Pollutant or pollutant propertyPretreatment standard
pHNo limitations.
BOD5      Do.
TSS      Do.
Oil and grease      Do.
COD      Do.
Surfactants      Do.

[40 FR 6443, Feb. 11, 1975, as amended at 60 FR 33955, June 29, 1995]

§417.135   Standards of performance for new sources.

The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart;

Effluent characteristicEffluent limitations
Maximum for any 1 dayAverage of daily values for 30 consecutive days shall not exceed—
Metric units (kilograms per 1,000 kg of anhydrous product)
BOD50.300.15
COD1.50.75
TSS0.04.02
Surfactants0.30.15
Oil and grease0.06.03
pH(1)(1)
English units (pounds per 1,000 lb of anhydrous product)
BOD50.300.15
COD1.50.75
TSS0.04.02
Surfactants0.30.15
Oil and grease0.06.03
pH(1)(1)

1Within the range 6.0 to 9.0.

§417.136   Pretreatment standards for new sources.

Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.

[60 FR 33955, June 29, 1995]

Need assistance?