e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of March 26, 2020

Title 40Chapter ISubchapter NPart 408 → Subpart AD


Title 40: Protection of Environment
PART 408—CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY


Subpart AD—Non-Alaskan Scallop Processing Subcategory


Contents
§408.300   Applicability; description of the non-Alaskan scallop processing subcategory.
§408.301   Specialized definitions.
§408.302   Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
§408.303   [Reserved]
§408.304   Pretreatment standards for existing sources.
§408.305   Standards of performance for new sources.
§408.306   Pretreatment standards for new sources.
§408.307   Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.

Source: 40 FR 55797, Dec. 1, 1975, unless otherwise noted.

§408.300   Applicability; description of the non-Alaskan scallop processing subcategory.

With the exception of land-based processing of calico scallops, the provisions of this subpart are applicable to discharges resulting from the processing of scallops outside of Alaska.

§408.301   Specialized definitions.

For the purpose of this subpart:

(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.

(b) The term product shall mean the weight of the scallop meat after processing.

§408.302   Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):

Effluent characteristicEffluent limitations
Maximum for any 1 dayAverage of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of product)
TSS6.01.4
Oil and grease7.70.24
pH(1)(1)
English units (lb/1,000 lb of product)
TSS6.01.4
Oil and grease7.70.24
pH(1)(1)

1Within the range 6.0 to 9.0.

[40 FR 55797, Dec. 1, 1975, as amended at 60 FR 33948, June 29, 1995]

§408.303   [Reserved]

§408.304   Pretreatment standards for existing sources.

Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart.

Pollutant or pollutant propertyPretreatment standard
BOD5No limitation.
TSS      Do.
pH      Do.
Oil and grease      Do.

[40 FR 55797, Dec. 1, 1975, as amended at 60 FR 33948, June 29, 1995]

§408.305   Standards of performance for new sources.

The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:

Effluent characteristicEffluent limitations
Maximum for any 1 dayAverage of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of product)
TSS5.71.4
Oil and grease7.30.23
pH(1)(1)
English units (lb/1,000 lb of product)
TSS5.71.4
Oil and grease7.30.23
pH(1)(1)

1Within the range 6.0 to 9.0.

§408.306   Pretreatment standards for new sources.

Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new source subject to the provisions of this subpart:

Pollutant or pollutant propertyPretreatment standard
BOD5No limitation.
TSS      Do.
pH      Do.
Oil and grease      Do.

[40 FR 55797, Dec. 1, 1975, as amended at 60 FR 33948, June 29, 1995]

§408.307   Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.

Except as provided in §§125.30 through 125.32, the following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best conventional pollutant control technology:

Effuent characteristicEfflluent limitations
Maximum for any 1 dayAverage of daily values for thirty consecutive days shall not exceed—
Metric units (kg/kkg of product)
TSS5.71.4
Oil and grease7.30.23
pH(1)(1)
English units (pounds per 1,000 lb of product)
TSS5.71.4
Oil and grease7.30.23
pH(1)(1)

1 Within the range 6.0 to 9.0.

[51 FR 24998, July 9, 1986]

Need assistance?