Electronic Code of Federal Regulations
|
e-CFR data is current as of January 14, 2021 |
Title 33 → Chapter I → Subchapter NN → Part 150 → Subpart G → Subject Group |
Title 33: Navigation and Navigable Waters
PART 150—DEEPWATER PORTS: OPERATIONS
Subpart G—Workplace Safety and Health
Eyes and Face
§150.609 When is eye and face protection required?
The operator must provide eye and face protectors for the use of persons engaged in or observing activities where damage to the eye is possible, such as welding, grinding, machining, chipping, handling hazardous materials, or burning or cutting acetylene. These eye and face protectors must be:
(a) Properly marked and in compliance with the requirements of 29 CFR 1910.133; and
(b) Maintained in good condition or replaced when necessary.
§150.610 Where must eyewash equipment be located?
Portable or fixed eyewash equipment providing emergency relief must be immediately available near any area where there is a reasonable probability that eye injury may occur.