e-CFR Navigation Aids


Simple Search

Advanced Search

 — Boolean

 — Proximity


Search History

Search Tips


Latest Updates

User Info


Agency List

Incorporation By Reference

eCFR logo

Related Resources

Electronic Code of Federal Regulations

We invite you to try out our new beta eCFR site at https://ecfr.federalregister.gov. We have made big changes to make the eCFR easier to use. Be sure to leave feedback using the Feedback button on the bottom right of each page!

e-CFR data is current as of February 24, 2021

Title 7Subtitle BChapter VIIISubchapter APart 800 → §800.88

Title 7: Agriculture

§800.88   Loss of identity.

(a) Lots. Except as noted in paragraph (d) of this section, the indentity of a lot of grain shall be considered lost if (1) a portion of the grain is unloaded, transferred, or otherwise removed from the carrier or container in which the grain was located at the time of the original inspection; or (2) a portion of grain or other material, including additives, is added to the lot after the orginal inspection was performed, unless the addition of the additive was performed in accordance with the regulations and the instructions. At the option of official personnel performing a reinspection, appeal inspection, or Board appeal inspection service, the identity of grain in a closed carrier or container shall be considered lost if the carrier or container is not sealed or if the seal record is incomplete.

(b) Carriers and containers. The indentity of a carrier or container shall be considered lost when (1) the stowage area is cleaned, painted, treated, fumigated, or fitted after the original inspection was performed; or (2) the identification of the carrier or container has been changed since the original inspection was performed.

(c) Submitted samples. The identity of a submitted sample of grain shall be considered lost when (1) the identifying number, mark, or symbol for the sample is lost or destroyed or (2) the samples have not been retained and protected by official personnel as prescribed in the instructions.

(d) Additives.1 If additives are applied during loading to outbound, including export, grain after sampling or during unloading to inbound grain before sampling for the purpose of insect or fungi control, dust suppression, or identification, the inspection certificate shall show a statement showing the type and purpose of the additive application, except that no statement is required to be shown when the additive is a fumigant applied for the purpose of insect control.

1Elevators, other handlers of grain, and their agents are responsible for the additive's proper usage and application. Compliance with this section does not excuse compliance with applicable Federal, State, and local laws.

[52 FR 6495, Mar. 4, 1987, as amended at 58 FR 3212, Jan. 8, 1993; 59 FR 52077, Oct. 14, 1994]

Need assistance?