e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of November 7, 2019

Title 47Chapter ISubchapter DPart 95Subpart C → §95.765


Title 47: Telecommunication
PART 95—PERSONAL RADIO SERVICES
Subpart C—Radio Control Radio Service


§95.765   RCRS frequency accuracy.

Each RCRS transmitter type must be designed to satisfy the frequency accuracy requirements in this section.

(a) Each RCRS transmitter type capable of transmitting on channels in the 72 or 75 MHz frequency band must be designed such that the carrier frequencies remain within ±20 parts-per-million (ppm) of the channel center frequencies listed in §95.763(b) and (c) during normal operating conditions.

(b) Except as allowed under paragraph (c) of this section, each RCRS transmitter type capable of transmitting in the 26-28 MHz frequency band must be designed such that the carrier frequencies remain within ±50 ppm of the channel center frequencies listed in §95.763(a) during normal operating conditions.

(c) Each RCRS transmitter type that transmits in the 26-28 MHz frequency band with a mean transmitter power of 2.5 W or less and is used solely by the operator to turn on and/or off a device at a remote location, other than a device used solely to attract attention, must be designed such that the carrier frequencies remain within ±100 ppm of the channel center frequencies listed in §95.763(a) during normal operating conditions.

Need assistance?