Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

Electronic Code of Federal Regulations

We invite you to try out our new beta eCFR site at https://ecfr.federalregister.gov. We have made big changes to make the eCFR easier to use. Be sure to leave feedback using the Feedback button on the bottom right of each page!

e-CFR data is current as of November 24, 2020

Title 40Chapter ISubchapter RPart 721Subpart E → §721.9005


Title 40: Protection of Environment
PART 721—SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES
Subpart E—Significant New Uses for Specific Chemical Substances


§721.9005   2-Pyrrolidinone, 1,1′-(2-methyl-1,5-pentanediyl)bis-.

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as 2-pyrrolidinone, 1,1′-(2-methyl-1,5-pentanediyl)bis- (PMN P-93-761; CAS No. 146453-62-5) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section.

(2) The significant new uses are:

(i) Protection in the workplace. Requirements as specified in §721.63 (a)(1), (a)(2)(i) (There must be no permeation of the PMN substance greater than 0.08 grams (g)/minutes (min) centimeter (cm2) after 8 hours of testing in accordance with the most current version of the American Society for Testing and Materials (ASTM) F739 “Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases.” The results of all glove permeation testing must be reported in accordance with the most current version of (ASTM) F1194 “Guide for Documenting the Results of Chemical Permeation Testing of Protective Clothing Materials.” Manufacturers, importers, and processors must submit such glove test data to the Agency and must receive written Agency approval for each type of glove tested prior to use of such gloves. The following gloves have been tested in accordance with the ASTM F739 method and found to satisfy the requirements for use by EPA: Ansell Edmond/8-352/Neoprene rubber, 0.097 cm thick. Gloves may not be used for a time period longer than they are actually tested and must be replaced at the end of each work shift), (a)(2)(ii), (a)(2)(iii), (a)(3), (b) (concentration set at 1.0 percent), and (c).

(ii) Hazard communication program. Requirements as specified in §721.72 (a), (b), (c), (d), (e) (concentration set at 1.0 percent), (f), (g)(l)(iii), (g)(l)(iv), (g)(2)(i), (g)(2)(iii), (g)(2)(v), and (g)(5). The label and MSDS as required by this paragraph shall also include the following statement: This substance is expected to enhance the absorption of other chemicals into skin or other materials.

(iii) Industrial, commercial, and consumer activities. Requirements as specified in §721.80 (o), (q), and (k) (use other than as a heat transfer fluid).

(b) Specific requirements. The provisions of subpart A of this part apply to this section except as modified by this paragraph.

(1) Recordkeeping. Recordkeeping requirements as specified in §721.125 (a), (b), (c), (d), (e), (f), (g), (h), and (i) are applicable to manufacturers, importers, and processors of this substance.

(2) Limitations or revocation of certain notification requirements. The provisions of §721.185 apply to this section.

(3) Determining whether a specific use is subject to this section. The provisions of §721.1725(b)(1) apply to this section.

[63 FR 3435, Jan. 22, 1998]

Need assistance?