Electronic Code of Federal Regulations
|
e-CFR data is current as of July 1, 2020 |
Title 40 → Chapter I → Subchapter N → Part 426 → Subpart E → §426.55 |
Title 40: Protection of Environment
PART 426—GLASS MANUFACTURING POINT SOURCE CATEGORY
Subpart E—Float Glass Manufacturing Subcategory
§426.55 Standards of performance for new sources.
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
| Effluent characteristic | Effluent limitations | |
|---|---|---|
| Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed— | |
| Metric units (g/kkg of product) | ||
| TSS | 0.70 | 0.70 |
| Oil | 1.40 | 1 .40 |
| Phosphorus | 0.05 | .05 |
| pH | (1) | (1) |
| English units (lb/ton of product) | ||
| TSS | 0.0014 | 0.0014 |
| Oil | 0.0028 | .0028 |
| Phosphorus | 0.0001 | .0001 |
| pH | (1) | (1) |
1Within the range 6.0 to 9.0.